* Re: tulip under linux sparc?
@ 1999-10-05 4:34 David S. Miller
1999-10-05 4:35 ` nick
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: David S. Miller @ 1999-10-05 4:34 UTC (permalink / raw)
To: ultralinux
From: "nick" <nickc@cardsoft.com>
Date: Tue, 5 Oct 1999 14:35:12 +1000
Is it possible or not to get a Netgear 10/100 card, based on the
tulip driver, working on a UE10 running Sparc Linux? (redhat 6.0)
If the card works with the de4x5.o driver under x86, it will work
on UltraSparc/PCI as well.
Later,
David S. Miller
davem@redhat.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
@ 1999-10-05 4:35 ` nick
1999-10-05 13:10 ` David Cooley
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: nick @ 1999-10-05 4:35 UTC (permalink / raw)
To: ultralinux
Anyone,
Is it possible or not to get a Netgear 10/100 card, based on the tulip
driver, working on a UE10 running Sparc Linux? (redhat 6.0)
thanks
nick
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
1999-10-05 4:35 ` nick
@ 1999-10-05 13:10 ` David Cooley
1999-10-05 13:22 ` David S. Miller
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: David Cooley @ 1999-10-05 13:10 UTC (permalink / raw)
To: ultralinux
At 02:35 PM 10/5/1999 +1000, nick wrote:
>Anyone,
>
>Is it possible or not to get a Netgear 10/100 card, based on the tulip
>driver, working on a UE10 running Sparc Linux? (redhat 6.0)
It's not possible because the netgear card has a bios/microcode setup for a
PC architecture. The Sun has to have a card that is designed for the OBP
architecture.
=============================David Cooley N5XMT Internet: N5XMT@bellsouth.net
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
=============================
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
1999-10-05 4:35 ` nick
1999-10-05 13:10 ` David Cooley
@ 1999-10-05 13:22 ` David S. Miller
1999-10-05 15:04 ` David Cooley
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: David S. Miller @ 1999-10-05 13:22 UTC (permalink / raw)
To: ultralinux
Date: Tue, 05 Oct 1999 09:10:32 -0400
From: David Cooley <n5xmt@bellsouth.net>
It's not possible because the netgear card has a bios/microcode
setup for a PC architecture. The Sun has to have a card that is
designed for the OBP architecture.
_Please_ don't spread around misinformation like this, it simply isn't
true.
The issue is that these NetGEAR cards are LiteON Tulip based, and not
supported by the de4x5 driver, but the tulip.c one which I haven't
done the "endianness/64-bit" portability fixes to.
I use all sorts of Tulip based cards, even quad-tulip Adaptec ones,
all the time in my Ultra/PCI machines. All of them have x86 bios's,
which mean you just can't boot from them under OBP, nothing more.
Later,
David S. Miller
davem@redhat.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
` (2 preceding siblings ...)
1999-10-05 13:22 ` David S. Miller
@ 1999-10-05 15:04 ` David Cooley
1999-10-05 15:11 ` David S. Miller
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: David Cooley @ 1999-10-05 15:04 UTC (permalink / raw)
To: ultralinux
At 06:22 AM 10/5/1999 -0700, David S. Miller wrote:
> Date: Tue, 05 Oct 1999 09:10:32 -0400
> From: David Cooley <n5xmt@bellsouth.net>
>
> It's not possible because the netgear card has a bios/microcode
> setup for a PC architecture. The Sun has to have a card that is
> designed for the OBP architecture.
>
>_Please_ don't spread around misinformation like this, it simply isn't
>true.
>
>The issue is that these NetGEAR cards are LiteON Tulip based, and not
>supported by the de4x5 driver, but the tulip.c one which I haven't
>done the "endianness/64-bit" portability fixes to.
>
>I use all sorts of Tulip based cards, even quad-tulip Adaptec ones,
>all the time in my Ultra/PCI machines. All of them have x86 bios's,
>which mean you just can't boot from them under OBP, nothing more.
Hmm... Didn't know that...
Someone had asked on one of Newsgroups I frequent a while back about using
PCI cards from a PC because they were less expensive, and I said to try it,
they may work... PCI is PCI. I got blasted by about 6 people with the OBP
compliant thing... Other than a SCSI card used for the boot disk or a net
card used for booting on a diskless client, would there be any restrictions
on using PC based PCI cards of any type?
=============================David Cooley N5XMT Internet: N5XMT@bellsouth.net
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
=============================
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
` (3 preceding siblings ...)
1999-10-05 15:04 ` David Cooley
@ 1999-10-05 15:11 ` David S. Miller
1999-10-05 15:41 ` Bob Drzyzgula
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: David S. Miller @ 1999-10-05 15:11 UTC (permalink / raw)
To: ultralinux
Date: Tue, 05 Oct 1999 11:04:34 -0400
From: David Cooley <n5xmt@bellsouth.net>
Other than a SCSI card used for the boot disk or a net card used
for booting on a diskless client, would there be any restrictions
on using PC based PCI cards of any type?
It's all a matter of whether the driver has been hacked into
being portable or not yet. I even have some $19USD NE2000
PCI clones in one of my PCI Ultras.
Later,
David S. Miller
davem@redhat.com
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
` (4 preceding siblings ...)
1999-10-05 15:11 ` David S. Miller
@ 1999-10-05 15:41 ` Bob Drzyzgula
1999-10-06 14:53 ` Peter Jones
1999-10-10 5:43 ` Steve Dunham
7 siblings, 0 replies; 9+ messages in thread
From: Bob Drzyzgula @ 1999-10-05 15:41 UTC (permalink / raw)
To: ultralinux
On Tue, Oct 05, 1999 at 11:04:34AM -0400, David Cooley wrote:
>
> Hmm... Didn't know that...
> Someone had asked on one of Newsgroups I frequent a while back about using
> PCI cards from a PC because they were less expensive, and I said to try it,
> they may work... PCI is PCI. I got blasted by about 6 people with the OBP
> compliant thing... Other than a SCSI card used for the boot disk or a net
> card used for booting on a diskless client, would there be any restrictions
> on using PC based PCI cards of any type?
I think that the issue is that, to be functional at boot
time, there has to be OBP driver code for the card *either*
in the card *or* in the system OBP. Sun's stock OBP has
driver code for some basic PCI cards, but it could not
be described as "wide support for most cards". Manufacturers
that wish to sell in the SPARC/PCI market have the option
of writing their own OBP driver and putting it in ROM on
the card in a standard manner; in that case the system
OBP will find it and can branch to that code at boot time.
Adaptec does this with some of their SCSI cards, for
example. But once a system is up and running, the ability
of an OS to use the card is a function of the OS. It may
be the case that Solaris won't use cards that aren't
reported by the OBP, but Linux can go ahead and probe for
cards that the OBP didn't recognize. (Did I get this right,
Dave?)
--Bob
--
==============================
Bob Drzyzgula It's not a problem
bob@drzyzgula.org until something bad happens
==============================
http://www.drzyzgula.org/bob/electronics/
==============================
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
` (5 preceding siblings ...)
1999-10-05 15:41 ` Bob Drzyzgula
@ 1999-10-06 14:53 ` Peter Jones
1999-10-10 5:43 ` Steve Dunham
7 siblings, 0 replies; 9+ messages in thread
From: Peter Jones @ 1999-10-06 14:53 UTC (permalink / raw)
To: ultralinux
On Tue, 5 Oct 1999, Bob Drzyzgula wrote:
> I think that the issue is that, to be functional at boot time, there
> has to be OBP driver code for the card *either* in the card *or* in
> the system OBP. Sun's stock OBP has driver code for some basic PCI
> cards, but it could not be described as "wide support for most cards".
> Manufacturers that wish to sell in the SPARC/PCI market have the
> option of writing their own OBP driver and putting it in ROM on the
> card in a standard manner; in that case the system OBP will find it
> and can branch to that code at boot time. Adaptec does this with some
> of their SCSI cards, for example. But once a system is up and running,
> the ability of an OS to use the card is a function of the OS. It may
> be the case that Solaris won't use cards that aren't reported by the
> OBP, but Linux can go ahead and probe for cards that the OBP didn't
> recognize. (Did I get this right, Dave?)
Pretty much, yeah. Most PCI cards should work, With a few minor
exceptions, such as _old_ Buslogic scsi boards tend to make my u10 not get
_to_ openboot, some cards do some rather obnoxious things with their DMA,
like ess Maestro's and a couple of other sound cards i've got.
But yeah, there isn't any good reason a vendor can't make a PCI card that
works fine on a sparc and an x86 (and an alpha, and a powerpc). OBP
support just affects doing things from the firmware, like booting the
device.
-- Peter
"Who's scruffy-looking?"
-- Solo
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: tulip under linux sparc?
1999-10-05 4:34 tulip under linux sparc? David S. Miller
` (6 preceding siblings ...)
1999-10-06 14:53 ` Peter Jones
@ 1999-10-10 5:43 ` Steve Dunham
7 siblings, 0 replies; 9+ messages in thread
From: Steve Dunham @ 1999-10-10 5:43 UTC (permalink / raw)
To: ultralinux
David Cooley <n5xmt@bellsouth.net> writes:
> At 02:35 PM 10/5/1999 +1000, nick wrote:
> >Anyone,
> >
> >Is it possible or not to get a Netgear 10/100 card, based on the tulip
> >driver, working on a UE10 running Sparc Linux? (redhat 6.0)
> It's not possible because the netgear card has a bios/microcode setup for a
> PC architecture. The Sun has to have a card that is designed for the OBP
> architecture.
This not true. I've used both a standard PC 3Com 3c905 network card
and a standard PC Adaptec 2940 card in an Ultra 5. It works fine with
Linux.
(Note that You can't load the kernel from a SCSI disk without the
right BIOS, but Linux can use the devices without problem after the
kernel is loaded. - In fact the Ultra 5 that I am typing this on is
swapping off of a SCSI disk through the standard PC Adaptec controller.)
Steve
dunham@cse.msu.edu
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~1999-10-10 5:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-10-05 4:34 tulip under linux sparc? David S. Miller
1999-10-05 4:35 ` nick
1999-10-05 13:10 ` David Cooley
1999-10-05 13:22 ` David S. Miller
1999-10-05 15:04 ` David Cooley
1999-10-05 15:11 ` David S. Miller
1999-10-05 15:41 ` Bob Drzyzgula
1999-10-06 14:53 ` Peter Jones
1999-10-10 5:43 ` Steve Dunham
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.