* [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice
2019-03-11 13:31 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Arkadiusz Hiler
@ 2019-03-11 13:31 ` Arkadiusz Hiler
2019-03-11 14:05 ` Martin Peres
2019-03-11 14:06 ` Daniel Vetter
2019-03-11 14:11 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Patchwork
` (4 subsequent siblings)
5 siblings, 2 replies; 10+ messages in thread
From: Arkadiusz Hiler @ 2019-03-11 13:31 UTC (permalink / raw)
To: igt-dev
test_plane_position already iterates over outputs using
for_each_valid_output_on_pipe so there is no need to do that twice,
especially with unused *output.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
---
tests/kms_plane_multiple.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
index 617054d9..7d8bc325 100644
--- a/tests/kms_plane_multiple.c
+++ b/tests/kms_plane_multiple.c
@@ -341,19 +341,15 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
}
igt_subtest_f("atomic-pipe-%s-tiling-x", kmstest_pipe_name(pipe))
- for_each_valid_output_on_pipe(&data->display, pipe, output)
test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_X_TILED);
igt_subtest_f("atomic-pipe-%s-tiling-y", kmstest_pipe_name(pipe))
- for_each_valid_output_on_pipe(&data->display, pipe, output)
test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Y_TILED);
igt_subtest_f("atomic-pipe-%s-tiling-yf", kmstest_pipe_name(pipe))
- for_each_valid_output_on_pipe(&data->display, pipe, output)
test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Yf_TILED);
igt_subtest_f("atomic-pipe-%s-tiling-none", kmstest_pipe_name(pipe))
- for_each_valid_output_on_pipe(&data->display, pipe, output)
test_plane_position(data, pipe, LOCAL_DRM_FORMAT_MOD_NONE);
}
--
2.20.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice
2019-03-11 13:31 ` [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice Arkadiusz Hiler
@ 2019-03-11 14:05 ` Martin Peres
2019-03-11 14:59 ` Maarten Lankhorst
2019-03-11 14:06 ` Daniel Vetter
1 sibling, 1 reply; 10+ messages in thread
From: Martin Peres @ 2019-03-11 14:05 UTC (permalink / raw)
To: Arkadiusz Hiler, igt-dev
On 11/03/2019 15:31, Arkadiusz Hiler wrote:
> test_plane_position already iterates over outputs using
> for_each_valid_output_on_pipe so there is no need to do that twice,
> especially with unused *output.
>
> Cc: Mika Kahola <mika.kahola@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
> ---
> tests/kms_plane_multiple.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
> index 617054d9..7d8bc325 100644
> --- a/tests/kms_plane_multiple.c
> +++ b/tests/kms_plane_multiple.c
> @@ -341,19 +341,15 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
> }
>
> igt_subtest_f("atomic-pipe-%s-tiling-x", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
test_plane_position is still using for_each_valid_output_on_pipe instead
of for_each_pipe_with_single_output, unless we really expect the
connectors to matter here?
If not (which I assume is true), it would be good to drop the usage of
for_each_valid_output_on_pipe for crc-testing and replace all occurences
with for_each_pipe_with_single_output. This should speed up KMS testing
on the machines with 2+ screens attached.
Martin
> test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_X_TILED);
>
> igt_subtest_f("atomic-pipe-%s-tiling-y", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Y_TILED);
>
> igt_subtest_f("atomic-pipe-%s-tiling-yf", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Yf_TILED);
>
> igt_subtest_f("atomic-pipe-%s-tiling-none", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_DRM_FORMAT_MOD_NONE);
> }
>
>
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice
2019-03-11 14:05 ` Martin Peres
@ 2019-03-11 14:59 ` Maarten Lankhorst
0 siblings, 0 replies; 10+ messages in thread
From: Maarten Lankhorst @ 2019-03-11 14:59 UTC (permalink / raw)
To: Martin Peres, Arkadiusz Hiler, igt-dev
Op 11-03-2019 om 15:05 schreef Martin Peres:
> On 11/03/2019 15:31, Arkadiusz Hiler wrote:
>> test_plane_position already iterates over outputs using
>> for_each_valid_output_on_pipe so there is no need to do that twice,
>> especially with unused *output.
>>
>> Cc: Mika Kahola <mika.kahola@intel.com>
>> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
>> Cc: Martin Peres <martin.peres@linux.intel.com>
> Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
>
>> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
>> ---
>> tests/kms_plane_multiple.c | 4 ----
>> 1 file changed, 4 deletions(-)
>>
>> diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
>> index 617054d9..7d8bc325 100644
>> --- a/tests/kms_plane_multiple.c
>> +++ b/tests/kms_plane_multiple.c
>> @@ -341,19 +341,15 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
>> }
>>
>> igt_subtest_f("atomic-pipe-%s-tiling-x", kmstest_pipe_name(pipe))
>> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position is still using for_each_valid_output_on_pipe instead
> of for_each_pipe_with_single_output, unless we really expect the
> connectors to matter here?
>
> If not (which I assume is true), it would be good to drop the usage of
> for_each_valid_output_on_pipe for crc-testing and replace all occurences
> with for_each_pipe_with_single_output. This should speed up KMS testing
> on the machines with 2+ screens attached.
Yeah, one output per pipe is sufficient. Pipe crc doesn't really differ based on output, and even if it did that macro will attempt to test all outputs at least once. Should be enough coverage. :)
~Maarten
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice
2019-03-11 13:31 ` [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice Arkadiusz Hiler
2019-03-11 14:05 ` Martin Peres
@ 2019-03-11 14:06 ` Daniel Vetter
1 sibling, 0 replies; 10+ messages in thread
From: Daniel Vetter @ 2019-03-11 14:06 UTC (permalink / raw)
To: Arkadiusz Hiler; +Cc: igt-dev
On Mon, Mar 11, 2019 at 03:31:50PM +0200, Arkadiusz Hiler wrote:
> test_plane_position already iterates over outputs using
> for_each_valid_output_on_pipe so there is no need to do that twice,
> especially with unused *output.
>
> Cc: Mika Kahola <mika.kahola@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Martin Peres <martin.peres@linux.intel.com>
> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
> tests/kms_plane_multiple.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
> index 617054d9..7d8bc325 100644
> --- a/tests/kms_plane_multiple.c
> +++ b/tests/kms_plane_multiple.c
> @@ -341,19 +341,15 @@ run_tests_for_pipe(data_t *data, enum pipe pipe)
> }
>
> igt_subtest_f("atomic-pipe-%s-tiling-x", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_X_TILED);
>
> igt_subtest_f("atomic-pipe-%s-tiling-y", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Y_TILED);
>
> igt_subtest_f("atomic-pipe-%s-tiling-yf", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Yf_TILED);
>
> igt_subtest_f("atomic-pipe-%s-tiling-none", kmstest_pipe_name(pipe))
> - for_each_valid_output_on_pipe(&data->display, pipe, output)
> test_plane_position(data, pipe, LOCAL_DRM_FORMAT_MOD_NONE);
> }
>
> --
> 2.20.1
>
> _______________________________________________
> igt-dev mailing list
> igt-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread
* [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t
2019-03-11 13:31 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Arkadiusz Hiler
2019-03-11 13:31 ` [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice Arkadiusz Hiler
@ 2019-03-11 14:11 ` Patchwork
2019-03-11 14:12 ` [igt-dev] [PATCH i-g-t 1/2] " Daniel Vetter
` (3 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Patchwork @ 2019-03-11 14:11 UTC (permalink / raw)
To: Arkadiusz Hiler; +Cc: igt-dev
== Series Details ==
Series: series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t
URL : https://patchwork.freedesktop.org/series/57832/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5733 -> IGTPW_2586
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57832/revisions/1/mbox/
Known issues
------------
Here are the changes found in IGTPW_2586 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@cs-compute:
- fi-kbl-8809g: NOTRUN -> FAIL [fdo#108094]
* igt@amdgpu/amd_basic@cs-sdma:
- fi-skl-6770hq: NOTRUN -> SKIP [fdo#109271] +37
* igt@gem_exec_basic@readonly-bsd2:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] +76
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-byt-j1900: PASS -> SKIP [fdo#109271]
* igt@i915_pm_rpm@basic-rte:
- fi-byt-j1900: PASS -> FAIL [fdo#108800]
* igt@i915_selftest@live_hangcheck:
- fi-ilk-650: PASS -> INCOMPLETE [fdo#109723]
* igt@kms_busy@basic-flip-a:
- fi-kbl-7567u: PASS -> SKIP [fdo#109271] / [fdo#109278] +2
- fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_busy@basic-flip-c:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_chamelium@hdmi-crc-fast:
- fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] +62
* igt@kms_chamelium@vga-edid-read:
- fi-hsw-4770r: NOTRUN -> SKIP [fdo#109271] +45
* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: PASS -> FAIL [fdo#103167]
* igt@kms_pipe_crc_basic@read-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#107362]
* igt@kms_pipe_crc_basic@read-crc-pipe-b-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]
#### Possible fixes ####
* igt@amdgpu/amd_basic@userptr:
- fi-kbl-8809g: DMESG-WARN [fdo#108965] -> PASS
* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-bsw-kefka: SKIP [fdo#109271] -> PASS
* igt@i915_pm_rpm@basic-rte:
- fi-bsw-kefka: FAIL [fdo#108800] -> PASS
* igt@kms_busy@basic-flip-a:
- fi-gdg-551: FAIL [fdo#103182] -> PASS +1
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#108094]: https://bugs.freedesktop.org/show_bug.cgi?id=108094
[fdo#108800]: https://bugs.freedesktop.org/show_bug.cgi?id=108800
[fdo#108965]: https://bugs.freedesktop.org/show_bug.cgi?id=108965
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109723]: https://bugs.freedesktop.org/show_bug.cgi?id=109723
Participating hosts (44 -> 41)
------------------------------
Additional (4): fi-hsw-4770r fi-skl-6770hq fi-bsw-n3050 fi-pnv-d510
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-icl-u2 fi-bsw-cyan fi-bdw-samus
Build changes
-------------
* IGT: IGT_4879 -> IGTPW_2586
CI_DRM_5733: e853777d9c87e9b21d9ccb781e0dc186d816cfc0 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2586: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2586/
IGT_4879: 4e7296aa879350b10a216b88fa7f44d919765765 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2586/
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t
2019-03-11 13:31 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Arkadiusz Hiler
2019-03-11 13:31 ` [igt-dev] [PATCH i-g-t 2/2] tests/kms_plane_multiple: Do not iterate over output twice Arkadiusz Hiler
2019-03-11 14:11 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Patchwork
@ 2019-03-11 14:12 ` Daniel Vetter
2019-03-11 15:54 ` [igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,1/2] " Patchwork
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Daniel Vetter @ 2019-03-11 14:12 UTC (permalink / raw)
To: Arkadiusz Hiler; +Cc: igt-dev
On Mon, Mar 11, 2019 at 03:31:49PM +0200, Arkadiusz Hiler wrote:
> It's set up for capture and then freed but never used.
>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Hm, sounds a bit like a test gap, we should at least make sure no garbage
from outside of the of the visible area leaks in, even when scaling?
Testing scaling itself is a bit harder, since we have no standards for how
the hw is supposed to interpolate transitions. And with uniform color
across the entire plane all you can do is check for leaks.
Hm maybe we can at least to some basic checks, like make sure that the
uniform areas are at the right spots (but with quite a few pixels of
safety distance from the nearest transitions, for higher-order filters).
Maybe ask Jani Saarinen to add that to the list of JIRAs ...
Patch itself looks good. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
> tests/kms_plane_scaling.c | 7 -------
> 1 file changed, 7 deletions(-)
>
> diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
> index 1015c80c..d408a203 100644
> --- a/tests/kms_plane_scaling.c
> +++ b/tests/kms_plane_scaling.c
> @@ -33,7 +33,6 @@ typedef struct {
> int drm_fd;
> igt_display_t display;
> igt_crc_t ref_crc;
> - igt_pipe_crc_t *pipe_crc;
>
> int image_w;
> int image_h;
> @@ -72,8 +71,6 @@ static void cleanup_fbs(data_t *data)
> static void cleanup_crtc(data_t *data)
> {
> igt_display_reset(&data->display);
> - igt_pipe_crc_free(data->pipe_crc);
> - data->pipe_crc = NULL;
>
> cleanup_fbs(data);
> }
> @@ -89,9 +86,6 @@ static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
>
> igt_output_set_pipe(output, pipe);
>
> - /* create the pipe_crc object for this pipe */
> - data->pipe_crc = igt_pipe_crc_new(data->drm_fd, pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
> -
> igt_skip_on(!igt_display_has_format_mod(display, DRM_FORMAT_XRGB8888,
> tiling));
>
> @@ -566,7 +560,6 @@ igt_main
>
> igt_fixture {
> data.drm_fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_AMDGPU);
> - igt_require_pipe_crc(data.drm_fd);
> igt_display_require(&data.display, data.drm_fd);
> data.devid = is_i915_device(data.drm_fd) ?
> intel_get_drm_devid(data.drm_fd) : 0;
> --
> 2.20.1
>
> _______________________________________________
> igt-dev mailing list
> igt-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread* [igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t
2019-03-11 13:31 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Arkadiusz Hiler
` (2 preceding siblings ...)
2019-03-11 14:12 ` [igt-dev] [PATCH i-g-t 1/2] " Daniel Vetter
@ 2019-03-11 15:54 ` Patchwork
2019-03-12 11:09 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t (rev2) Patchwork
2019-03-12 12:56 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
5 siblings, 0 replies; 10+ messages in thread
From: Patchwork @ 2019-03-11 15:54 UTC (permalink / raw)
To: Arkadiusz Hiler; +Cc: igt-dev
== Series Details ==
Series: series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t
URL : https://patchwork.freedesktop.org/series/57832/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5733_full -> IGTPW_2586_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_2586_full absolutely need to be
verified manually.
If you think the reported changes have nothing to do with the changes
introduced in IGTPW_2586_full, please notify your bug team to allow them
to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57832/revisions/1/mbox/
Known issues
------------
Here are the changes found in IGTPW_2586_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_param@invalid-param-get:
- shard-glk: NOTRUN -> FAIL [fdo#109559]
- shard-snb: NOTRUN -> FAIL [fdo#109559]
- shard-hsw: NOTRUN -> FAIL [fdo#109559]
- shard-apl: NOTRUN -> FAIL [fdo#109559]
* igt@gem_ctx_param@invalid-param-set:
- shard-snb: NOTRUN -> FAIL [fdo#109674]
- shard-glk: NOTRUN -> FAIL [fdo#109674]
- shard-kbl: NOTRUN -> FAIL [fdo#109674]
- shard-apl: NOTRUN -> FAIL [fdo#109674]
- shard-hsw: NOTRUN -> FAIL [fdo#109674]
* igt@gem_eio@unwedge-stress:
- shard-snb: NOTRUN -> FAIL [fdo#109661] +1
* igt@gem_exec_schedule@preempt-other-chain-blt:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +1300
* igt@gem_exec_store@basic-bsd2:
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +911
* igt@kms_atomic_transition@1x-modeset-transitions-nonblocking:
- shard-apl: NOTRUN -> FAIL [fdo#109660]
- shard-kbl: NOTRUN -> FAIL [fdo#109660]
* igt@kms_atomic_transition@6x-modeset-transitions-fencing:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +144
* igt@kms_atomic_transition@6x-modeset-transitions-nonblocking:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +55
* igt@kms_available_modes_crc@available_mode_test_crc:
- shard-apl: NOTRUN -> FAIL [fdo#106641]
- shard-kbl: NOTRUN -> FAIL [fdo#106641]
- shard-glk: NOTRUN -> FAIL [fdo#106641]
* igt@kms_busy@extended-modeset-hang-newfb-render-c:
- shard-kbl: NOTRUN -> DMESG-WARN [fdo#107956] +8
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-glk: NOTRUN -> DMESG-WARN [fdo#107956] +11
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-snb: NOTRUN -> DMESG-WARN [fdo#107956] +4
* igt@kms_busy@extended-pageflip-hang-newfb-render-a:
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107956] +10
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-a:
- shard-hsw: NOTRUN -> DMESG-WARN [fdo#107956] +6
* igt@kms_color@pipe-a-degamma:
- shard-glk: NOTRUN -> FAIL [fdo#104782] / [fdo#108145]
* igt@kms_color@pipe-b-degamma:
- shard-glk: NOTRUN -> FAIL [fdo#104782] +1
* igt@kms_color@pipe-c-ctm-max:
- shard-glk: NOTRUN -> FAIL [fdo#108147] +1
* igt@kms_concurrent@pipe-d:
- shard-hsw: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +89
* igt@kms_content_protection@atomic:
- shard-kbl: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1
- shard-apl: NOTRUN -> FAIL [fdo#108597] / [fdo#108739] +1
* igt@kms_content_protection@atomic-dpms:
- shard-apl: NOTRUN -> FAIL [fdo#108739]
- shard-kbl: NOTRUN -> FAIL [fdo#108739]
* igt@kms_cursor_crc@cursor-256x85-sliding:
- shard-kbl: NOTRUN -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: NOTRUN -> FAIL [fdo#103232] +6
* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-glk: NOTRUN -> FAIL [fdo#103232] +21
* igt@kms_cursor_crc@cursor-alpha-opaque:
- shard-kbl: NOTRUN -> FAIL [fdo#109350]
- shard-glk: NOTRUN -> FAIL [fdo#109350]
- shard-apl: NOTRUN -> FAIL [fdo#109350]
* igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: NOTRUN -> FAIL [fdo#105454] / [fdo#106509] +1
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-apl: NOTRUN -> FAIL [fdo#103167] +1
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-onoff:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +688
- shard-glk: NOTRUN -> FAIL [fdo#103167] +9
* igt@kms_frontbuffer_tracking@fbc-2p-rte:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +855
* igt@kms_frontbuffer_tracking@fbc-stridechange:
- shard-hsw: NOTRUN -> FAIL [fdo#105682]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-blt:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +691
* igt@kms_invalid_dotclock:
- shard-glk: NOTRUN -> DMESG-WARN [fdo#109373]
* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-kbl: NOTRUN -> FAIL [fdo#103166] +1
* igt@kms_plane_alpha_blend@pipe-b-alpha-7efc:
- shard-kbl: NOTRUN -> FAIL [fdo#108145] / [fdo#108590] +4
* igt@kms_plane_alpha_blend@pipe-b-alpha-basic:
- shard-apl: NOTRUN -> FAIL [fdo#108145] +13
* igt@kms_plane_alpha_blend@pipe-b-alpha-transparant-fb:
- shard-kbl: NOTRUN -> FAIL [fdo#108145] +6
* igt@kms_plane_alpha_blend@pipe-c-alpha-transparant-fb:
- shard-glk: NOTRUN -> FAIL [fdo#108145] +8
* igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
- shard-glk: NOTRUN -> FAIL [fdo#103166] +7
* igt@kms_plane_multiple@atomic-pipe-c-tiling-y:
- shard-apl: NOTRUN -> FAIL [fdo#103166] +5
* igt@kms_rotation_crc@multiplane-rotation:
- shard-kbl: NOTRUN -> INCOMPLETE [fdo#103665]
* igt@kms_setmode@basic:
- shard-glk: NOTRUN -> FAIL [fdo#99912]
- shard-hsw: NOTRUN -> FAIL [fdo#99912]
- shard-snb: NOTRUN -> FAIL [fdo#99912]
* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> FAIL [fdo#100047]
- shard-kbl: NOTRUN -> FAIL [fdo#100047]
* igt@kms_universal_plane@cursor-fb-leak-pipe-e:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +60
* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +52
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: NOTRUN -> FAIL [fdo#104894]
* igt@kms_vblank@pipe-c-ts-continuation-modeset-hang:
- shard-apl: NOTRUN -> FAIL [fdo#104894] +3
* igt@prime_vgem@basic-fence-flip:
- shard-glk: NOTRUN -> FAIL [fdo#103182]
* igt@runner@aborted:
- shard-glk: NOTRUN -> FAIL [fdo#109373] / [k.org#202321]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#100047]: https://bugs.freedesktop.org/show_bug.cgi?id=100047
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#105454]: https://bugs.freedesktop.org/show_bug.cgi?id=105454
[fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#106641]: https://bugs.freedesktop.org/show_bug.cgi?id=106641
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108590]: https://bugs.freedesktop.org/show_bug.cgi?id=108590
[fdo#108597]: https://bugs.freedesktop.org/show_bug.cgi?id=108597
[fdo#108739]: https://bugs.freedesktop.org/show_bug.cgi?id=108739
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109350]: https://bugs.freedesktop.org/show_bug.cgi?id=109350
[fdo#109373]: https://bugs.freedesktop.org/show_bug.cgi?id=109373
[fdo#109559]: https://bugs.freedesktop.org/show_bug.cgi?id=109559
[fdo#109660]: https://bugs.freedesktop.org/show_bug.cgi?id=109660
[fdo#109661]: https://bugs.freedesktop.org/show_bug.cgi?id=109661
[fdo#109674]: https://bugs.freedesktop.org/show_bug.cgi?id=109674
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#202321]: https://bugzilla.kernel.org/show_bug.cgi?id=202321
Participating hosts (3 -> 5)
------------------------------
ERROR: It appears as if the changes made in IGTPW_2586_full prevented too many machines from booting.
Additional (5): shard-apl shard-glk shard-hsw shard-kbl shard-snb
Missing (3): pig-skl-6260u pig-glk-j5005 pig-hsw-4770r
Build changes
-------------
* IGT: None -> IGTPW_2586
* Piglit: piglit_4509 -> None
CI_DRM_5733: e853777d9c87e9b21d9ccb781e0dc186d816cfc0 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2586: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2586/
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2586/
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread* [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t (rev2)
2019-03-11 13:31 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Arkadiusz Hiler
` (3 preceding siblings ...)
2019-03-11 15:54 ` [igt-dev] ✗ Fi.CI.IGT: failure for series starting with [i-g-t,1/2] " Patchwork
@ 2019-03-12 11:09 ` Patchwork
2019-03-12 12:56 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
5 siblings, 0 replies; 10+ messages in thread
From: Patchwork @ 2019-03-12 11:09 UTC (permalink / raw)
To: Arkadiusz Hiler; +Cc: igt-dev
== Series Details ==
Series: series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t (rev2)
URL : https://patchwork.freedesktop.org/series/57832/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5735 -> IGTPW_2592
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57832/revisions/2/mbox/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_2592:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses.
They do not affect the overall result.
* igt@kms_flip@basic-flip-vs-modeset:
- {fi-icl-y}: NOTRUN -> SKIP +37
Known issues
------------
Here are the changes found in IGTPW_2592 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_basic@gtt-bsd2:
- fi-byt-clapper: NOTRUN -> SKIP [fdo#109271] +57
* igt@gem_exec_suspend@basic-s3:
- fi-icl-u3: PASS -> FAIL [fdo#103375]
* igt@kms_addfb_basic@addfb25-y-tiled-small:
- fi-byt-n2820: NOTRUN -> SKIP [fdo#109271] +56
* igt@kms_busy@basic-flip-a:
- fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_busy@basic-flip-b:
- fi-gdg-551: PASS -> FAIL [fdo#103182]
* igt@kms_busy@basic-flip-c:
- fi-byt-clapper: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
- fi-byt-n2820: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_chamelium@hdmi-crc-fast:
- fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] +62
* igt@kms_chamelium@hdmi-edid-read:
- fi-hsw-peppy: NOTRUN -> SKIP [fdo#109271] +46
* igt@kms_frontbuffer_tracking@basic:
- fi-hsw-peppy: NOTRUN -> DMESG-FAIL [fdo#102614] / [fdo#107814]
- fi-byt-clapper: NOTRUN -> FAIL [fdo#103167]
* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: NOTRUN -> FAIL [fdo#103191] / [fdo#107362]
* igt@kms_psr@primary_mmap_gtt:
- fi-blb-e6850: NOTRUN -> SKIP [fdo#109271] +27
#### Possible fixes ####
* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: FAIL [fdo#108511] -> PASS
* igt@i915_selftest@live_execlists:
- fi-apl-guc: INCOMPLETE [fdo#103927] / [fdo#109720] -> PASS
* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: FAIL [fdo#103167] -> PASS
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
- fi-blb-e6850: INCOMPLETE [fdo#107718] -> PASS
* igt@prime_vgem@basic-fence-flip:
- fi-gdg-551: DMESG-FAIL [fdo#103182] -> PASS
- fi-kbl-7567u: FAIL [fdo#104008] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102614]: https://bugs.freedesktop.org/show_bug.cgi?id=102614
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104008]: https://bugs.freedesktop.org/show_bug.cgi?id=104008
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107814]: https://bugs.freedesktop.org/show_bug.cgi?id=107814
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109294]: https://bugs.freedesktop.org/show_bug.cgi?id=109294
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720
Participating hosts (41 -> 40)
------------------------------
Additional (5): fi-bsw-n3050 fi-hsw-peppy fi-icl-y fi-byt-n2820 fi-byt-clapper
Missing (6): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-bsw-cyan fi-pnv-d510 fi-bdw-samus
Build changes
-------------
* IGT: IGT_4881 -> IGTPW_2592
CI_DRM_5735: a51930d5783a7de342db8ea03199fcc0ab31c098 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2592: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2592/
IGT_4881: 6ef8aa586de6ea899dd567378ba0f76885bdd914 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2592/
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread* [igt-dev] ✓ Fi.CI.IGT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t (rev2)
2019-03-11 13:31 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t Arkadiusz Hiler
` (4 preceding siblings ...)
2019-03-12 11:09 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t (rev2) Patchwork
@ 2019-03-12 12:56 ` Patchwork
5 siblings, 0 replies; 10+ messages in thread
From: Patchwork @ 2019-03-12 12:56 UTC (permalink / raw)
To: Arkadiusz Hiler; +Cc: igt-dev
== Series Details ==
Series: series starting with [i-g-t,1/2] tests/kms_plane_scaling: Rip out unused igt_pipe_crc_t (rev2)
URL : https://patchwork.freedesktop.org/series/57832/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5735_full -> IGTPW_2592_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57832/revisions/2/mbox/
Known issues
------------
Here are the changes found in IGTPW_2592_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_pm_rc6_residency@rc6-accuracy:
- shard-kbl: PASS -> SKIP [fdo#109271]
* igt@kms_busy@extended-modeset-hang-newfb-render-b:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956] +2
* igt@kms_busy@extended-modeset-hang-newfb-render-e:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: PASS -> DMESG-WARN [fdo#107956] +2
- shard-snb: PASS -> DMESG-WARN [fdo#107956] +1
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107956]
* igt@kms_busy@extended-modeset-hang-oldfb-render-d:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +3
* igt@kms_cursor_crc@cursor-128x42-random:
- shard-glk: NOTRUN -> FAIL [fdo#103232] +1
* igt@kms_cursor_crc@cursor-256x256-dpms:
- shard-kbl: NOTRUN -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-256x256-random:
- shard-apl: PASS -> FAIL [fdo#103232] +4
* igt@kms_cursor_crc@cursor-64x21-onscreen:
- shard-kbl: PASS -> FAIL [fdo#103232] +3
* igt@kms_flip@flip-vs-suspend:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540]
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-kbl: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-onoff:
- shard-apl: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-mmap-cpu:
- shard-glk: PASS -> FAIL [fdo#103167] +8
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-cur-indfb-draw-mmap-wc:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +17
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-blt:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +32
* igt@kms_frontbuffer_tracking@psr-2p-primscrn-spr-indfb-draw-pwrite:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +12
* igt@kms_invalid_dotclock:
- shard-glk: NOTRUN -> DMESG-WARN [fdo#109373]
* igt@kms_lease@lease_invalid_crtc:
- shard-apl: PASS -> INCOMPLETE [fdo#103927]
* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-glk: NOTRUN -> FAIL [fdo#103166]
* igt@kms_plane_alpha_blend@pipe-c-alpha-7efc:
- shard-apl: NOTRUN -> FAIL [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-c-alpha-transparant-fb:
- shard-glk: NOTRUN -> FAIL [fdo#108145] +1
* igt@kms_plane_multiple@atomic-pipe-a-tiling-y:
- shard-glk: PASS -> FAIL [fdo#103166] +3
* igt@kms_plane_multiple@atomic-pipe-b-tiling-x:
- shard-kbl: PASS -> FAIL [fdo#103166]
* igt@kms_setmode@basic:
- shard-apl: PASS -> FAIL [fdo#99912]
* igt@kms_universal_plane@universal-plane-gen9-features-pipe-d:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_vblank@pipe-a-ts-continuation-dpms-rpm:
- shard-apl: PASS -> FAIL [fdo#104894] +1
* igt@runner@aborted:
- shard-glk: NOTRUN -> FAIL [fdo#109373] / [k.org#202321]
#### Possible fixes ####
* igt@kms_busy@extended-modeset-hang-newfb-render-a:
- shard-hsw: DMESG-WARN [fdo#107956] -> PASS +1
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-snb: DMESG-WARN [fdo#107956] -> PASS
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-a:
- shard-glk: DMESG-WARN [fdo#107956] -> PASS
* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-kbl: FAIL [fdo#107725] / [fdo#108145] -> PASS
* igt@kms_color@pipe-a-ctm-max:
- shard-kbl: FAIL [fdo#108147] -> PASS
- shard-apl: FAIL [fdo#108147] -> PASS
* igt@kms_cursor_crc@cursor-128x42-sliding:
- shard-kbl: FAIL [fdo#103232] -> PASS
* igt@kms_cursor_legacy@cursorb-vs-flipb-atomic-transitions:
- shard-hsw: INCOMPLETE [fdo#103540] -> PASS
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-kbl: FAIL [fdo#103167] -> PASS
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-apl: FAIL [fdo#103167] -> PASS
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-fullscreen:
- shard-glk: FAIL [fdo#103167] -> PASS
* igt@kms_plane@pixel-format-pipe-a-planes:
- shard-kbl: FAIL [fdo#103166] -> PASS +1
* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-apl: FAIL [fdo#103166] -> PASS +3
* igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
- shard-glk: FAIL [fdo#103166] -> PASS
* igt@kms_setmode@basic:
- shard-hsw: FAIL [fdo#99912] -> PASS
* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-apl: FAIL [fdo#104894] -> PASS
- shard-kbl: FAIL [fdo#104894] -> PASS
#### Warnings ####
* igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-blt:
- shard-apl: INCOMPLETE [fdo#103927] -> SKIP [fdo#109271]
* igt@kms_rotation_crc@multiplane-rotation:
- shard-kbl: INCOMPLETE [fdo#103665] -> FAIL [fdo#109016]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#107725]: https://bugs.freedesktop.org/show_bug.cgi?id=107725
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109373]: https://bugs.freedesktop.org/show_bug.cgi?id=109373
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#202321]: https://bugzilla.kernel.org/show_bug.cgi?id=202321
Participating hosts (10 -> 5)
------------------------------
Missing (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u
Build changes
-------------
* IGT: IGT_4881 -> IGTPW_2592
* Piglit: piglit_4509 -> None
CI_DRM_5735: a51930d5783a7de342db8ea03199fcc0ab31c098 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2592: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2592/
IGT_4881: 6ef8aa586de6ea899dd567378ba0f76885bdd914 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2592/
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 10+ messages in thread