Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [CI 16/19] drm/i915/dp: Configure Display stream splitter registers during DSC enable
Date: Fri,  2 Nov 2018 20:49:29 -0700	[thread overview]
Message-ID: <20181103034932.26493-16-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181103034932.26493-1-manasi.d.navare@intel.com>

Display Stream Splitter registers need to be programmed to enable
the joiner if two DSC engines are used and also to enable
the left and the right DSC engines. This happens as part of
the DSC enabling routine in the source in atomic commit.

v4:
* Remove redundant comment (Ville)
v3:
* Use cpu_transcoder instead of encoder->type (Ville)
v2:
* Rebase (Manasi)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intelcom>
---
 drivers/gpu/drm/i915/intel_vdsc.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
index 85af5f784aad..fae5193551d8 100644
--- a/drivers/gpu/drm/i915/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -1010,6 +1010,12 @@ static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder,
 void intel_dsc_enable(struct intel_encoder *encoder,
 		      const struct intel_crtc_state *crtc_state)
 {
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum pipe pipe = crtc->pipe;
+	i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
+	u32 dss_ctl1_val = 0;
+	u32 dss_ctl2_val = 0;
 
 	if (!crtc_state->dsc_params.compression_enable)
 		return;
@@ -1018,5 +1024,20 @@ void intel_dsc_enable(struct intel_encoder *encoder,
 
 	intel_dp_write_dsc_pps_sdp(encoder, crtc_state);
 
+	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
+		dss_ctl1_reg = DSS_CTL1;
+		dss_ctl2_reg = DSS_CTL2;
+	} else {
+		dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
+		dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
+	}
+	dss_ctl2_val |= LEFT_BRANCH_VDSC_ENABLE;
+	if (crtc_state->dsc_params.dsc_split) {
+		dss_ctl2_val |= RIGHT_BRANCH_VDSC_ENABLE;
+		dss_ctl1_val |= JOINER_ENABLE;
+	}
+	I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
+	I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
+
 	return;
 }
-- 
2.18.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-11-03  3:47 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-03  3:49 [CI 01/19] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-03  3:49 ` [CI 02/19] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-03  3:49 ` [CI 03/19] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-03  3:49 ` [CI 04/19] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-03  3:49 ` [CI 05/19] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-03  3:49 ` [CI 06/19] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-03  3:49 ` [CI 07/19] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-03  3:49 ` [CI 08/19] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-03  3:49 ` [CI 09/19] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-03  3:49 ` [CI 10/19] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-03  3:49 ` [CI 11/19] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-03  3:49 ` [CI 12/19] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-03  3:49 ` [CI 13/19] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-03  3:49 ` [CI 14/19] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-03  3:49 ` [CI 15/19] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-03  3:49 ` Manasi Navare [this message]
2018-11-03  3:49 ` [CI 17/19] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-03  3:49 ` [CI 18/19] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-03  3:49 ` [CI 19/19] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-11-03  3:59 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [CI,01/19] drm/dsc: Define Display Stream Compression PPS infoframe Patchwork
2018-11-03  4:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-03  4:22 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-03  5:45 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181103034932.26493-16-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox