From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function
Date: Wed, 28 Aug 2019 15:47:01 -0700 [thread overview]
Message-ID: <20190828224701.422-1-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20190827221735.29351-3-manasi.d.navare@intel.com>
Create a new function intel_commit_modeset_disables() consistent with the naming
in drm atomic helpers and similar to the enable function.
This helps better organize the disable sequence in atomic_commit_tail()
No functional change
v4:
* Do not create a function pointer, just a function (Maarten)
v3:
* Rebase (Manasi)
v2:
* Create a helper for old_crtc_state disables (Lucas)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 92 ++++++++++++--------
drivers/gpu/drm/i915/i915_drv.h | 1 +
2 files changed, 59 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 77dfb0f6a6e0..5c53b45dc06e 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -13758,6 +13758,61 @@ static void intel_update_crtc(struct intel_crtc *crtc,
intel_finish_crtc_commit(state, crtc);
}
+static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
+ struct intel_crtc_state *old_crtc_state,
+ struct intel_crtc_state *new_crtc_state,
+ struct intel_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+
+ intel_crtc_disable_planes(state, crtc);
+
+ /*
+ * We need to disable pipe CRC before disabling the pipe,
+ * or we race against vblank off.
+ */
+ intel_crtc_disable_pipe_crc(crtc);
+
+ dev_priv->display.crtc_disable(old_crtc_state, state);
+ crtc->active = false;
+ intel_fbc_disable(crtc);
+ intel_disable_shared_dpll(old_crtc_state);
+
+ /*
+ * Underruns don't always raise interrupts,
+ * so check manually.
+ */
+ intel_check_cpu_fifo_underruns(dev_priv);
+ intel_check_pch_fifo_underruns(dev_priv);
+
+ /* FIXME unify this for all platforms */
+ if (!new_crtc_state->base.active &&
+ !HAS_GMCH(dev_priv) &&
+ dev_priv->display.initial_watermarks)
+ dev_priv->display.initial_watermarks(state,
+ new_crtc_state);
+}
+
+static void intel_commit_modeset_disables(struct intel_atomic_state *state)
+{
+ struct intel_crtc_state *new_crtc_state, *old_crtc_state;
+ struct intel_crtc *crtc;
+ int i;
+
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
+ if (!needs_modeset(new_crtc_state))
+ continue;
+
+ intel_pre_plane_update(old_crtc_state, new_crtc_state);
+
+ if (old_crtc_state->base.active)
+ intel_old_crtc_state_disables(state,
+ old_crtc_state,
+ new_crtc_state,
+ crtc);
+ }
+}
+
static void intel_commit_modeset_enables(struct intel_atomic_state *state)
{
struct intel_crtc *crtc;
@@ -13938,42 +13993,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
put_domains[crtc->pipe] =
modeset_get_crtc_power_domains(new_crtc_state);
}
-
- if (!needs_modeset(new_crtc_state))
- continue;
-
- intel_pre_plane_update(old_crtc_state, new_crtc_state);
-
- if (old_crtc_state->base.active) {
- intel_crtc_disable_planes(state, crtc);
-
- /*
- * We need to disable pipe CRC before disabling the pipe,
- * or we race against vblank off.
- */
- intel_crtc_disable_pipe_crc(crtc);
-
- dev_priv->display.crtc_disable(old_crtc_state, state);
- crtc->active = false;
- intel_fbc_disable(crtc);
- intel_disable_shared_dpll(old_crtc_state);
-
- /*
- * Underruns don't always raise
- * interrupts, so check manually.
- */
- intel_check_cpu_fifo_underruns(dev_priv);
- intel_check_pch_fifo_underruns(dev_priv);
-
- /* FIXME unify this for all platforms */
- if (!new_crtc_state->base.active &&
- !HAS_GMCH(dev_priv) &&
- dev_priv->display.initial_watermarks)
- dev_priv->display.initial_watermarks(state,
- new_crtc_state);
- }
}
+ intel_commit_modeset_disables(state);
+
/* FIXME: Eventually get rid of our crtc->config pointer */
for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
crtc->config = new_crtc_state;
@@ -15929,6 +15952,7 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
else
dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
+
}
static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 75a42e8df67e..db7480831e52 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -289,6 +289,7 @@ struct drm_i915_display_funcs {
void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
struct intel_atomic_state *old_state);
void (*commit_modeset_enables)(struct intel_atomic_state *state);
+ void (*commit_modeset_disables)(struct intel_atomic_state *state);
void (*audio_codec_enable)(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state);
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-08-28 22:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 22:17 [PATCH 0/2] Transcoder Port Sync preparation refactoring/renaming Manasi Navare
2019-08-27 22:17 ` [PATCH 1/2] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-28 17:11 ` Manasi Navare
2019-08-29 7:44 ` Maarten Lankhorst
2019-08-29 21:17 ` Manasi Navare
2019-08-27 22:17 ` [PATCH 2/2] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-08-28 6:30 ` Maarten Lankhorst
2019-08-28 17:09 ` Manasi Navare
2019-08-28 22:47 ` Manasi Navare [this message]
2019-08-29 7:30 ` [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function Maarten Lankhorst
2019-08-29 21:18 ` Manasi Navare
2019-08-30 10:20 ` Maarten Lankhorst
2019-08-28 9:07 ` ✓ Fi.CI.BAT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-28 23:20 ` ✗ Fi.CI.CHECKPATCH: warning for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork
2019-08-29 4:33 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-29 10:06 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-29 11:19 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190828224701.422-1-manasi.d.navare@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox