From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function
Date: Thu, 29 Aug 2019 14:18:14 -0700 [thread overview]
Message-ID: <20190829211814.GK701@intel.com> (raw)
In-Reply-To: <20190828224701.422-1-manasi.d.navare@intel.com>
Thanks for the review pushed to dinq
Manasi
On Wed, Aug 28, 2019 at 03:47:01PM -0700, Manasi Navare wrote:
> Create a new function intel_commit_modeset_disables() consistent with the naming
> in drm atomic helpers and similar to the enable function.
> This helps better organize the disable sequence in atomic_commit_tail()
>
> No functional change
>
> v4:
> * Do not create a function pointer, just a function (Maarten)
> v3:
> * Rebase (Manasi)
> v2:
> * Create a helper for old_crtc_state disables (Lucas)
>
> Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 92 ++++++++++++--------
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> 2 files changed, 59 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 77dfb0f6a6e0..5c53b45dc06e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13758,6 +13758,61 @@ static void intel_update_crtc(struct intel_crtc *crtc,
> intel_finish_crtc_commit(state, crtc);
> }
>
> +static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> + struct intel_crtc_state *old_crtc_state,
> + struct intel_crtc_state *new_crtc_state,
> + struct intel_crtc *crtc)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +
> + intel_crtc_disable_planes(state, crtc);
> +
> + /*
> + * We need to disable pipe CRC before disabling the pipe,
> + * or we race against vblank off.
> + */
> + intel_crtc_disable_pipe_crc(crtc);
> +
> + dev_priv->display.crtc_disable(old_crtc_state, state);
> + crtc->active = false;
> + intel_fbc_disable(crtc);
> + intel_disable_shared_dpll(old_crtc_state);
> +
> + /*
> + * Underruns don't always raise interrupts,
> + * so check manually.
> + */
> + intel_check_cpu_fifo_underruns(dev_priv);
> + intel_check_pch_fifo_underruns(dev_priv);
> +
> + /* FIXME unify this for all platforms */
> + if (!new_crtc_state->base.active &&
> + !HAS_GMCH(dev_priv) &&
> + dev_priv->display.initial_watermarks)
> + dev_priv->display.initial_watermarks(state,
> + new_crtc_state);
> +}
> +
> +static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> +{
> + struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> + struct intel_crtc *crtc;
> + int i;
> +
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> + if (!needs_modeset(new_crtc_state))
> + continue;
> +
> + intel_pre_plane_update(old_crtc_state, new_crtc_state);
> +
> + if (old_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_crtc_state,
> + new_crtc_state,
> + crtc);
> + }
> +}
> +
> static void intel_commit_modeset_enables(struct intel_atomic_state *state)
> {
> struct intel_crtc *crtc;
> @@ -13938,42 +13993,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> put_domains[crtc->pipe] =
> modeset_get_crtc_power_domains(new_crtc_state);
> }
> -
> - if (!needs_modeset(new_crtc_state))
> - continue;
> -
> - intel_pre_plane_update(old_crtc_state, new_crtc_state);
> -
> - if (old_crtc_state->base.active) {
> - intel_crtc_disable_planes(state, crtc);
> -
> - /*
> - * We need to disable pipe CRC before disabling the pipe,
> - * or we race against vblank off.
> - */
> - intel_crtc_disable_pipe_crc(crtc);
> -
> - dev_priv->display.crtc_disable(old_crtc_state, state);
> - crtc->active = false;
> - intel_fbc_disable(crtc);
> - intel_disable_shared_dpll(old_crtc_state);
> -
> - /*
> - * Underruns don't always raise
> - * interrupts, so check manually.
> - */
> - intel_check_cpu_fifo_underruns(dev_priv);
> - intel_check_pch_fifo_underruns(dev_priv);
> -
> - /* FIXME unify this for all platforms */
> - if (!new_crtc_state->base.active &&
> - !HAS_GMCH(dev_priv) &&
> - dev_priv->display.initial_watermarks)
> - dev_priv->display.initial_watermarks(state,
> - new_crtc_state);
> - }
> }
>
> + intel_commit_modeset_disables(state);
> +
> /* FIXME: Eventually get rid of our crtc->config pointer */
> for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> crtc->config = new_crtc_state;
> @@ -15929,6 +15952,7 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
> dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
> else
> dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
> +
> }
>
> static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 75a42e8df67e..db7480831e52 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -289,6 +289,7 @@ struct drm_i915_display_funcs {
> void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
> struct intel_atomic_state *old_state);
> void (*commit_modeset_enables)(struct intel_atomic_state *state);
> + void (*commit_modeset_disables)(struct intel_atomic_state *state);
> void (*audio_codec_enable)(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state);
> --
> 2.19.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-08-29 21:16 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 22:17 [PATCH 0/2] Transcoder Port Sync preparation refactoring/renaming Manasi Navare
2019-08-27 22:17 ` [PATCH 1/2] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-28 17:11 ` Manasi Navare
2019-08-29 7:44 ` Maarten Lankhorst
2019-08-29 21:17 ` Manasi Navare
2019-08-27 22:17 ` [PATCH 2/2] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-08-28 6:30 ` Maarten Lankhorst
2019-08-28 17:09 ` Manasi Navare
2019-08-28 22:47 ` [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function Manasi Navare
2019-08-29 7:30 ` Maarten Lankhorst
2019-08-29 21:18 ` Manasi Navare [this message]
2019-08-30 10:20 ` Maarten Lankhorst
2019-08-28 9:07 ` ✓ Fi.CI.BAT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-28 23:20 ` ✗ Fi.CI.CHECKPATCH: warning for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork
2019-08-29 4:33 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-29 10:06 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-29 11:19 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190829211814.GK701@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox