Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Manasi Navare <manasi.d.navare@intel.com>,
	intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function
Date: Fri, 30 Aug 2019 12:20:01 +0200	[thread overview]
Message-ID: <215ba9b9-cc48-21bd-be5b-08b93aa78479@linux.intel.com> (raw)
In-Reply-To: <20190828224701.422-1-manasi.d.navare@intel.com>

Op 29-08-2019 om 00:47 schreef Manasi Navare:
> Create a new function intel_commit_modeset_disables() consistent with the naming
> in drm atomic helpers and similar to the enable function.
> This helps better organize the disable sequence in atomic_commit_tail()
>
> No functional change
>
> v4:
> * Do not create a function pointer, just a function (Maarten)
> v3:
> * Rebase (Manasi)
> v2:
> * Create a helper for old_crtc_state disables (Lucas)
>
> Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 92 ++++++++++++--------
>  drivers/gpu/drm/i915/i915_drv.h              |  1 +
>  2 files changed, 59 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 77dfb0f6a6e0..5c53b45dc06e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13758,6 +13758,61 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>  	intel_finish_crtc_commit(state, crtc);
>  }
>  
> +static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> +					  struct intel_crtc_state *old_crtc_state,
> +					  struct intel_crtc_state *new_crtc_state,
> +					  struct intel_crtc *crtc)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +
> +	intel_crtc_disable_planes(state, crtc);
> +
> +	/*
> +	 * We need to disable pipe CRC before disabling the pipe,
> +	 * or we race against vblank off.
> +	 */
> +	intel_crtc_disable_pipe_crc(crtc);
> +
> +	dev_priv->display.crtc_disable(old_crtc_state, state);
> +	crtc->active = false;
> +	intel_fbc_disable(crtc);
> +	intel_disable_shared_dpll(old_crtc_state);
> +
> +	/*
> +	 * Underruns don't always raise interrupts,
> +	 * so check manually.
> +	 */
> +	intel_check_cpu_fifo_underruns(dev_priv);
> +	intel_check_pch_fifo_underruns(dev_priv);
> +
> +	/* FIXME unify this for all platforms */
> +	if (!new_crtc_state->base.active &&
> +	    !HAS_GMCH(dev_priv) &&
> +	    dev_priv->display.initial_watermarks)
> +		dev_priv->display.initial_watermarks(state,
> +						     new_crtc_state);
> +}
> +
> +static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> +{
> +	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> +	struct intel_crtc *crtc;
> +	int i;
> +
> +	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
You dropped a for_each_*_reverse. :) Fix sent.
> +		if (!needs_modeset(new_crtc_state))
> +			continue;
> +
> +		intel_pre_plane_update(old_crtc_state, new_crtc_state);
> +
> +		if (old_crtc_state->base.active)
> +			intel_old_crtc_state_disables(state,
> +						      old_crtc_state,
> +						      new_crtc_state,
> +						      crtc);
> +	}
> +}
>  static void intel_commit_modeset_enables(struct intel_atomic_state *state)
>  {
>  	struct intel_crtc *crtc;
> @@ -13938,42 +13993,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
>  			put_domains[crtc->pipe] =
>  				modeset_get_crtc_power_domains(new_crtc_state);
>  		}
> -
> -		if (!needs_modeset(new_crtc_state))
> -			continue;
> -
> -		intel_pre_plane_update(old_crtc_state, new_crtc_state);
> -
> -		if (old_crtc_state->base.active) {
> -			intel_crtc_disable_planes(state, crtc);
> -
> -			/*
> -			 * We need to disable pipe CRC before disabling the pipe,
> -			 * or we race against vblank off.
> -			 */
> -			intel_crtc_disable_pipe_crc(crtc);
> -
> -			dev_priv->display.crtc_disable(old_crtc_state, state);
> -			crtc->active = false;
> -			intel_fbc_disable(crtc);
> -			intel_disable_shared_dpll(old_crtc_state);
> -
> -			/*
> -			 * Underruns don't always raise
> -			 * interrupts, so check manually.
> -			 */
> -			intel_check_cpu_fifo_underruns(dev_priv);
> -			intel_check_pch_fifo_underruns(dev_priv);
> -
> -			/* FIXME unify this for all platforms */
> -			if (!new_crtc_state->base.active &&
> -			    !HAS_GMCH(dev_priv) &&
> -			    dev_priv->display.initial_watermarks)
> -				dev_priv->display.initial_watermarks(state,
> -								     new_crtc_state);
> -		}
>  	}
>  
> +	intel_commit_modeset_disables(state);
> +
>  	/* FIXME: Eventually get rid of our crtc->config pointer */
>  	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
>  		crtc->config = new_crtc_state;
> @@ -15929,6 +15952,7 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
>  		dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
>  	else
>  		dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
> +
>  }
>  
>  static i915_reg_t i915_vgacntrl_reg(struct drm_i915_private *dev_priv)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 75a42e8df67e..db7480831e52 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -289,6 +289,7 @@ struct drm_i915_display_funcs {
>  	void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
>  			     struct intel_atomic_state *old_state);
>  	void (*commit_modeset_enables)(struct intel_atomic_state *state);
> +	void (*commit_modeset_disables)(struct intel_atomic_state *state);
>  	void (*audio_codec_enable)(struct intel_encoder *encoder,
>  				   const struct intel_crtc_state *crtc_state,
>  				   const struct drm_connector_state *conn_state);


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-08-30 10:20 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-27 22:17 [PATCH 0/2] Transcoder Port Sync preparation refactoring/renaming Manasi Navare
2019-08-27 22:17 ` [PATCH 1/2] drm/i915/display: Rename update_crtcs() to commit_modeset_enables() Manasi Navare
2019-08-28 17:11   ` Manasi Navare
2019-08-29  7:44     ` Maarten Lankhorst
2019-08-29 21:17     ` Manasi Navare
2019-08-27 22:17 ` [PATCH 2/2] drm/i915/display: Move the commit_tail() disable sequence to commit_modeset_disables() hook Manasi Navare
2019-08-28  6:30   ` Maarten Lankhorst
2019-08-28 17:09     ` Manasi Navare
2019-08-28 22:47   ` [PATCH v2 2/2] drm/i915/display: Move the commit_tail() disable sequence to separate function Manasi Navare
2019-08-29  7:30     ` Maarten Lankhorst
2019-08-29 21:18     ` Manasi Navare
2019-08-30 10:20     ` Maarten Lankhorst [this message]
2019-08-28  9:07 ` ✓ Fi.CI.BAT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-28 23:20 ` ✗ Fi.CI.CHECKPATCH: warning for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork
2019-08-29  4:33 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-29 10:06 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming Patchwork
2019-08-29 11:19 ` ✓ Fi.CI.IGT: success for Transcoder Port Sync preparation refactoring/renaming (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=215ba9b9-cc48-21bd-be5b-08b93aa78479@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=manasi.d.navare@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox