From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 4/8] drm/i915: Kill cnl_sanitize_cdclk()
Date: Fri, 6 Sep 2019 17:21:39 -0700 [thread overview]
Message-ID: <20190907002143.22591-5-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20190907002143.22591-1-matthew.d.roper@intel.com>
The CNL variant of this function is identical to the BXT variant aside
from not needing to handle SSA precharge.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/display/intel_cdclk.c | 46 +---------------------
1 file changed, 2 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 6b5b1328a3fa..f8c2a706990b 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1645,7 +1645,7 @@ static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
* Disable SSA Precharge when CD clock frequency < 500 MHz,
* enable otherwise.
*/
- if (dev_priv->cdclk.hw.cdclk >= 500000)
+ if (IS_GEN9_LP(dev_priv) && dev_priv->cdclk.hw.cdclk >= 500000)
expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
if (cdctl == expected)
@@ -1697,48 +1697,6 @@ static void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
-static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
-{
- u32 cdctl, expected;
-
- intel_update_cdclk(dev_priv);
- intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
-
- if (dev_priv->cdclk.hw.vco == 0 ||
- dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
- goto sanitize;
-
- /* DPLL okay; verify the cdclock
- *
- * Some BIOS versions leave an incorrect decimal frequency value and
- * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
- * so sanitize this register.
- */
- cdctl = I915_READ(CDCLK_CTL);
- /*
- * Let's ignore the pipe field, since BIOS could have configured the
- * dividers both synching to an active pipe, or asynchronously
- * (PIPE_NONE).
- */
- cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
-
- expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
- skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
-
- if (cdctl == expected)
- /* All well; nothing to sanitize */
- return;
-
-sanitize:
- DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
-
- /* force cdclk programming */
- dev_priv->cdclk.hw.cdclk = 0;
-
- /* force full PLL disable + enable */
- dev_priv->cdclk.hw.vco = -1;
-}
-
static void icl_init_cdclk(struct drm_i915_private *dev_priv)
{
struct intel_cdclk_state sanitized_state;
@@ -1800,7 +1758,7 @@ static void cnl_init_cdclk(struct drm_i915_private *dev_priv)
{
struct intel_cdclk_state cdclk_state;
- cnl_sanitize_cdclk(dev_priv);
+ bxt_sanitize_cdclk(dev_priv);
if (dev_priv->cdclk.hw.cdclk != 0 &&
dev_priv->cdclk.hw.vco != 0)
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-09-07 0:22 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-07 0:21 [PATCH 0/8] cdclk consolidation and rework for BXT-TGL Matt Roper
2019-09-07 0:21 ` [PATCH 1/8] drm/i915: Consolidate bxt/cnl/icl cdclk readout Matt Roper
2019-09-10 12:27 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 2/8] drm/i915: Use literal representation of cdclk tables Matt Roper
2019-09-08 2:57 ` Matt Roper
2019-09-08 4:05 ` Matt Roper
2019-09-10 12:56 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 3/8] drm/i915: Combine bxt_set_cdclk and cnl_set_cdclk Matt Roper
2019-09-10 12:35 ` Ville Syrjälä
2019-09-07 0:21 ` Matt Roper [this message]
2019-09-10 12:37 ` [PATCH 4/8] drm/i915: Kill cnl_sanitize_cdclk() Ville Syrjälä
2019-09-07 0:21 ` [PATCH 5/8] drm/i915: Consolidate {bxt, cnl, icl}_uninit_cdclk Matt Roper
2019-09-10 12:39 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 6/8] drm/i915: Add calc_voltage_level display vfunc Matt Roper
2019-09-10 12:41 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 7/8] drm/i915: Enhance cdclk sanitization Matt Roper
2019-09-10 12:42 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 8/8] drm/i915: Consolidate {bxt, cnl, icl}_init_cdclk Matt Roper
2019-09-10 12:44 ` Ville Syrjälä
2019-09-07 0:43 ` ✗ Fi.CI.CHECKPATCH: warning for cdclk consolidation and rework for BXT-TGL Patchwork
2019-09-07 1:31 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-09-08 3:17 ` ✗ Fi.CI.BUILD: failure for cdclk consolidation and rework for BXT-TGL (rev2) Patchwork
2019-09-08 4:23 ` ✗ Fi.CI.CHECKPATCH: warning for cdclk consolidation and rework for BXT-TGL (rev3) Patchwork
2019-09-08 4:48 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-08 5:57 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190907002143.22591-5-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox