From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 7/8] drm/i915: Enhance cdclk sanitization
Date: Tue, 10 Sep 2019 15:42:59 +0300 [thread overview]
Message-ID: <20190910124259.GM7482@intel.com> (raw)
In-Reply-To: <20190907002143.22591-8-matthew.d.roper@intel.com>
On Fri, Sep 06, 2019 at 05:21:42PM -0700, Matt Roper wrote:
> When reading out the BIOS-programmed cdclk state, let's make sure that
> the cdclk value is on the valid list for the platform, ensure that the
> VCO matches the cdclk, and ensure that the CD2X divider was set
> properly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_cdclk.c | 34 ++++++++++++++++++++--
> 1 file changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index a6696697a09f..356495591cf9 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -1607,6 +1607,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
> {
> u32 cdctl, expected;
> + int cdclk, vco;
>
> intel_update_cdclk(dev_priv);
> intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
> @@ -1629,8 +1630,37 @@ static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
> */
> cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
>
> - expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
> - skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
> + /* Make sure this is a legal cdclk value for the platform */
> + cdclk = calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk);
> + if (cdclk != dev_priv->cdclk.hw.cdclk)
> + goto sanitize;
> +
> + /* Make sure the VCO is correct for the cdclk */
> + vco = calc_cdclk_pll_vco(dev_priv, cdclk);
> + if (vco != dev_priv->cdclk.hw.vco)
> + goto sanitize;
> +
> + expected = skl_cdclk_decimal(cdclk);
> +
> + /* Figure out what CD2X divider we should be using for this cdclk */
> + switch (DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.vco,
> + dev_priv->cdclk.hw.cdclk)) {
> + case 2:
> + expected |= BXT_CDCLK_CD2X_DIV_SEL_1;
> + break;
> + case 3:
> + expected |= BXT_CDCLK_CD2X_DIV_SEL_1_5;
> + break;
> + case 4:
> + expected |= BXT_CDCLK_CD2X_DIV_SEL_2;
> + break;
> + case 8:
> + expected |= BXT_CDCLK_CD2X_DIV_SEL_4;
> + break;
> + default:
> + goto sanitize;
> + }
> +
> /*
> * Disable SSA Precharge when CD clock frequency < 500 MHz,
> * enable otherwise.
> --
> 2.20.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-09-10 12:43 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-07 0:21 [PATCH 0/8] cdclk consolidation and rework for BXT-TGL Matt Roper
2019-09-07 0:21 ` [PATCH 1/8] drm/i915: Consolidate bxt/cnl/icl cdclk readout Matt Roper
2019-09-10 12:27 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 2/8] drm/i915: Use literal representation of cdclk tables Matt Roper
2019-09-08 2:57 ` Matt Roper
2019-09-08 4:05 ` Matt Roper
2019-09-10 12:56 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 3/8] drm/i915: Combine bxt_set_cdclk and cnl_set_cdclk Matt Roper
2019-09-10 12:35 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 4/8] drm/i915: Kill cnl_sanitize_cdclk() Matt Roper
2019-09-10 12:37 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 5/8] drm/i915: Consolidate {bxt, cnl, icl}_uninit_cdclk Matt Roper
2019-09-10 12:39 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 6/8] drm/i915: Add calc_voltage_level display vfunc Matt Roper
2019-09-10 12:41 ` Ville Syrjälä
2019-09-07 0:21 ` [PATCH 7/8] drm/i915: Enhance cdclk sanitization Matt Roper
2019-09-10 12:42 ` Ville Syrjälä [this message]
2019-09-07 0:21 ` [PATCH 8/8] drm/i915: Consolidate {bxt, cnl, icl}_init_cdclk Matt Roper
2019-09-10 12:44 ` Ville Syrjälä
2019-09-07 0:43 ` ✗ Fi.CI.CHECKPATCH: warning for cdclk consolidation and rework for BXT-TGL Patchwork
2019-09-07 1:31 ` ✗ Fi.CI.BAT: failure " Patchwork
2019-09-08 3:17 ` ✗ Fi.CI.BUILD: failure for cdclk consolidation and rework for BXT-TGL (rev2) Patchwork
2019-09-08 4:23 ` ✗ Fi.CI.CHECKPATCH: warning for cdclk consolidation and rework for BXT-TGL (rev3) Patchwork
2019-09-08 4:48 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-08 5:57 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190910124259.GM7482@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox