From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@intel.com>
To: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v4 06/23] drm/i915/adl_p: Add dedicated SAGV watermarks
Date: Mon, 17 May 2021 09:49:38 +0300 [thread overview]
Message-ID: <20210517064938.GA17429@intel.com> (raw)
In-Reply-To: <20210515031035.2561658-7-matthew.d.roper@intel.com>
On Fri, May 14, 2021 at 08:10:18PM -0700, Matt Roper wrote:
> XE_LPD reduces the number of regular watermark latency levels from 8
> to 6 on non-dgfx platforms. However the hardware also adds a special
> purpose SAGV wateramrk (and an accompanying transition watermark) that
> will be used by the hardware in place of the level 0 values during SAGV
> transitions.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
>
> Bspec: 49325, 49326, 50419
> Cc: Matt Atwood <matthew.s.atwood@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 32 +++++++++++
> drivers/gpu/drm/i915/i915_drv.h | 2 +
> drivers/gpu/drm/i915/i915_reg.h | 59 ++++++++++++++------
> drivers/gpu/drm/i915/intel_pm.c | 54 ++++++++++++++++--
> 4 files changed, 126 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index ce44f18340ee..2c2c5676dc30 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -8752,6 +8752,38 @@ static void verify_wm_state(struct intel_crtc *crtc,
> hw_wm_level->lines);
> }
>
> + hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0;
> + sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0;
> +
> + if (HAS_HW_SAGV_WM(dev_priv) &&
> + !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
> + drm_err(&dev_priv->drm,
> + "[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
> + plane->base.base.id, plane->base.name,
> + sw_wm_level->enable,
> + sw_wm_level->blocks,
> + sw_wm_level->lines,
> + hw_wm_level->enable,
> + hw_wm_level->blocks,
> + hw_wm_level->lines);
> + }
> +
> + hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm;
> + sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm;
> +
> + if (HAS_HW_SAGV_WM(dev_priv) &&
> + !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
> + drm_err(&dev_priv->drm,
> + "[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
> + plane->base.base.id, plane->base.name,
> + sw_wm_level->enable,
> + sw_wm_level->blocks,
> + sw_wm_level->lines,
> + hw_wm_level->enable,
> + hw_wm_level->blocks,
> + hw_wm_level->lines);
> + }
> +
> /* DDB */
> hw_ddb_entry = &hw->ddb_y[plane->id];
> sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane->id];
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 6eb6c6acd81e..d7583a01e135 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -590,6 +590,8 @@ i915_fence_timeout(const struct drm_i915_private *i915)
> /* Amount of SAGV/QGV points, BSpec precisely defines this */
> #define I915_NUM_QGV_POINTS 8
>
> +#define HAS_HW_SAGV_WM(i915) (DISPLAY_VER(i915) >= 13 && !IS_DGFX(i915))
> +
> struct ddi_vbt_port_info {
> /* Non-NULL if port present. */
> struct intel_bios_encoder_data *devdata;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index dbb75cd087d3..ab6ffe036841 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6435,16 +6435,28 @@ enum {
> /* Watermark register definitions for SKL */
> #define _CUR_WM_A_0 0x70140
> #define _CUR_WM_B_0 0x71140
> +#define _CUR_WM_SAGV_A 0x70158
> +#define _CUR_WM_SAGV_B 0x71158
> +#define _CUR_WM_SAGV_TRANS_A 0x7015C
> +#define _CUR_WM_SAGV_TRANS_B 0x7115C
> +#define _CUR_WM_TRANS_A 0x70168
> +#define _CUR_WM_TRANS_B 0x71168
> #define _PLANE_WM_1_A_0 0x70240
> #define _PLANE_WM_1_B_0 0x71240
> #define _PLANE_WM_2_A_0 0x70340
> #define _PLANE_WM_2_B_0 0x71340
> -#define _PLANE_WM_TRANS_1_A_0 0x70268
> -#define _PLANE_WM_TRANS_1_B_0 0x71268
> -#define _PLANE_WM_TRANS_2_A_0 0x70368
> -#define _PLANE_WM_TRANS_2_B_0 0x71368
> -#define _CUR_WM_TRANS_A_0 0x70168
> -#define _CUR_WM_TRANS_B_0 0x71168
> +#define _PLANE_WM_SAGV_1_A 0x70258
> +#define _PLANE_WM_SAGV_1_B 0x71258
> +#define _PLANE_WM_SAGV_2_A 0x70358
> +#define _PLANE_WM_SAGV_2_B 0x71358
> +#define _PLANE_WM_SAGV_TRANS_1_A 0x7025C
> +#define _PLANE_WM_SAGV_TRANS_1_B 0x7125C
> +#define _PLANE_WM_SAGV_TRANS_2_A 0x7035C
> +#define _PLANE_WM_SAGV_TRANS_2_B 0x7135C
> +#define _PLANE_WM_TRANS_1_A 0x70268
> +#define _PLANE_WM_TRANS_1_B 0x71268
> +#define _PLANE_WM_TRANS_2_A 0x70368
> +#define _PLANE_WM_TRANS_2_B 0x71368
> #define PLANE_WM_EN (1 << 31)
> #define PLANE_WM_IGNORE_LINES (1 << 30)
> #define PLANE_WM_LINES_MASK REG_GENMASK(26, 14)
> @@ -6452,19 +6464,32 @@ enum {
>
> #define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0)
> #define CUR_WM(pipe, level) _MMIO(_CUR_WM_0(pipe) + ((4) * (level)))
> -#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A_0, _CUR_WM_TRANS_B_0)
> -
> +#define CUR_WM_SAGV(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_A, _CUR_WM_SAGV_B)
> +#define CUR_WM_SAGV_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_TRANS_A, _CUR_WM_SAGV_TRANS_B)
> +#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A, _CUR_WM_TRANS_B)
> #define _PLANE_WM_1(pipe) _PIPE(pipe, _PLANE_WM_1_A_0, _PLANE_WM_1_B_0)
> #define _PLANE_WM_2(pipe) _PIPE(pipe, _PLANE_WM_2_A_0, _PLANE_WM_2_B_0)
> -#define _PLANE_WM_BASE(pipe, plane) \
> - _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
> -#define PLANE_WM(pipe, plane, level) \
> - _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
> -#define _PLANE_WM_TRANS_1(pipe) \
> - _PIPE(pipe, _PLANE_WM_TRANS_1_A_0, _PLANE_WM_TRANS_1_B_0)
> -#define _PLANE_WM_TRANS_2(pipe) \
> - _PIPE(pipe, _PLANE_WM_TRANS_2_A_0, _PLANE_WM_TRANS_2_B_0)
> -#define PLANE_WM_TRANS(pipe, plane) \
> +#define _PLANE_WM_BASE(pipe, plane) \
> + _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
> +#define PLANE_WM(pipe, plane, level) \
> + _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
> +#define _PLANE_WM_SAGV_1(pipe) \
> + _PIPE(pipe, _PLANE_WM_SAGV_1_A, _PLANE_WM_SAGV_1_B)
> +#define _PLANE_WM_SAGV_2(pipe) \
> + _PIPE(pipe, _PLANE_WM_SAGV_2_A, _PLANE_WM_SAGV_2_B)
> +#define PLANE_WM_SAGV(pipe, plane) \
> + _MMIO(_PLANE(plane, _PLANE_WM_SAGV_1(pipe), _PLANE_WM_SAGV_2(pipe)))
> +#define _PLANE_WM_SAGV_TRANS_1(pipe) \
> + _PIPE(pipe, _PLANE_WM_SAGV_TRANS_1_A, _PLANE_WM_SAGV_TRANS_1_B)
> +#define _PLANE_WM_SAGV_TRANS_2(pipe) \
> + _PIPE(pipe, _PLANE_WM_SAGV_TRANS_2_A, _PLANE_WM_SAGV_TRANS_2_B)
> +#define PLANE_WM_SAGV_TRANS(pipe, plane) \
> + _MMIO(_PLANE(plane, _PLANE_WM_SAGV_TRANS_1(pipe), _PLANE_WM_SAGV_TRANS_2(pipe)))
> +#define _PLANE_WM_TRANS_1(pipe) \
> + _PIPE(pipe, _PLANE_WM_TRANS_1_A, _PLANE_WM_TRANS_1_B)
> +#define _PLANE_WM_TRANS_2(pipe) \
> + _PIPE(pipe, _PLANE_WM_TRANS_2_A, _PLANE_WM_TRANS_2_B)
> +#define PLANE_WM_TRANS(pipe, plane) \
> _MMIO(_PLANE(plane, _PLANE_WM_TRANS_1(pipe), _PLANE_WM_TRANS_2(pipe)))
>
> /* define the Watermark register on Ironlake */
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 15d9a64e7b4c..95fda20d5547 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2983,7 +2983,9 @@ static void intel_fixup_cur_wm_latency(struct drm_i915_private *dev_priv,
> int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
> {
> /* how many WM levels are we expecting */
> - if (DISPLAY_VER(dev_priv) >= 9)
> + if (HAS_HW_SAGV_WM(dev_priv))
> + return 5;
> + else if (DISPLAY_VER(dev_priv) >= 9)
> return 7;
> else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
> return 4;
> @@ -4011,8 +4013,9 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state)
> * latter from the plane commit hooks (especially in the legacy
> * cursor case)
> */
> - pipe_wm->use_sagv_wm = DISPLAY_VER(dev_priv) >= 12 &&
> - intel_can_enable_sagv(dev_priv, new_bw_state);
> + pipe_wm->use_sagv_wm = !HAS_HW_SAGV_WM(dev_priv) &&
> + DISPLAY_VER(dev_priv) >= 12 &&
> + intel_can_enable_sagv(dev_priv, new_bw_state);
> }
>
> if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
> @@ -5619,6 +5622,13 @@ void skl_write_plane_wm(struct intel_plane *plane,
> skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
> skl_plane_trans_wm(pipe_wm, plane_id));
>
> + if (HAS_HW_SAGV_WM(dev_priv)) {
> + skl_write_wm_level(dev_priv, PLANE_WM_SAGV(pipe, plane_id),
> + &wm->sagv.wm0);
> + skl_write_wm_level(dev_priv, PLANE_WM_SAGV_TRANS(pipe, plane_id),
> + &wm->sagv.trans_wm);
> + }
> +
> if (DISPLAY_VER(dev_priv) >= 11) {
> skl_ddb_entry_write(dev_priv,
> PLANE_BUF_CFG(pipe, plane_id), ddb_y);
> @@ -5652,6 +5662,15 @@ void skl_write_cursor_wm(struct intel_plane *plane,
> skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe),
> skl_plane_trans_wm(pipe_wm, plane_id));
>
> + if (HAS_HW_SAGV_WM(dev_priv)) {
> + const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
> +
> + skl_write_wm_level(dev_priv, CUR_WM_SAGV(pipe),
> + &wm->sagv.wm0);
> + skl_write_wm_level(dev_priv, CUR_WM_SAGV_TRANS(pipe),
> + &wm->sagv.trans_wm);
> + }
> +
> skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe), ddb);
> }
>
> @@ -6016,6 +6035,15 @@ static bool skl_plane_selected_wm_equals(struct intel_plane *plane,
> return false;
> }
>
> + if (HAS_HW_SAGV_WM(i915)) {
> + const struct skl_plane_wm *old_wm = &old_pipe_wm->planes[plane->id];
> + const struct skl_plane_wm *new_wm = &new_pipe_wm->planes[plane->id];
> +
> + if (!skl_wm_level_equals(&old_wm->sagv.wm0, &new_wm->sagv.wm0) ||
> + !skl_wm_level_equals(&old_wm->sagv.trans_wm, &new_wm->sagv.trans_wm))
> + return false;
> + }
> +
> return skl_wm_level_equals(skl_plane_trans_wm(old_pipe_wm, plane->id),
> skl_plane_trans_wm(new_pipe_wm, plane->id));
> }
> @@ -6234,7 +6262,25 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
>
> skl_wm_level_from_reg_val(val, &wm->trans_wm);
>
> - if (DISPLAY_VER(dev_priv) >= 12) {
> + if (HAS_HW_SAGV_WM(dev_priv)) {
> + if (plane_id != PLANE_CURSOR)
> + val = intel_uncore_read(&dev_priv->uncore,
> + PLANE_WM_SAGV(pipe, plane_id));
> + else
> + val = intel_uncore_read(&dev_priv->uncore,
> + CUR_WM_SAGV(pipe));
> +
> + skl_wm_level_from_reg_val(val, &wm->sagv.wm0);
> +
> + if (plane_id != PLANE_CURSOR)
> + val = intel_uncore_read(&dev_priv->uncore,
> + PLANE_WM_SAGV_TRANS(pipe, plane_id));
> + else
> + val = intel_uncore_read(&dev_priv->uncore,
> + CUR_WM_SAGV_TRANS(pipe));
> +
> + skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm);
> + } else if (DISPLAY_VER(dev_priv) >= 12) {
> wm->sagv.wm0 = wm->wm[0];
> wm->sagv.trans_wm = wm->trans_wm;
> }
> --
> 2.25.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-05-17 6:46 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-15 3:10 [Intel-gfx] [PATCH v4 00/23] Alder Lake-P Support Matt Roper
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 01/23] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-05-17 6:52 ` Lisovskiy, Stanislav
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 02/23] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-05-17 15:18 ` Jani Nikula
2021-05-18 6:33 ` Kulkarni, Vandita
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 03/23] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-05-18 18:06 ` Navare, Manasi
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 04/23] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 05/23] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-05-24 13:40 ` Aditya Swarup
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 06/23] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-05-17 6:49 ` Lisovskiy, Stanislav [this message]
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 07/23] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-05-17 18:01 ` Imre Deak
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 08/23] drm/i915/adl_p: Handle TC cold Matt Roper
2021-05-17 14:53 ` Imre Deak
2021-05-17 23:15 ` Souza, Jose
2021-05-17 23:22 ` Souza, Jose
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 09/23] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-05-17 15:12 ` Imre Deak
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 10/23] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-05-18 11:58 ` Lisovskiy, Stanislav
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 11/23] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-05-18 12:22 ` Lisovskiy, Stanislav
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 12/23] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-05-17 6:38 ` Lisovskiy, Stanislav
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 13/23] drm/i915/adl_p: MBUS programming Matt Roper
2023-07-17 10:32 ` Tvrtko Ursulin
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 14/23] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-05-17 7:36 ` Kulkarni, Vandita
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 15/23] drm/i915/display: Replace dc3co_enabled with dc3co_exitline on intel_psr struct Matt Roper
2021-05-17 6:39 ` Gupta, Anshuman
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 16/23] drm/i915/display: Remove a redundant function argument from intel_psr_enable_source() Matt Roper
2021-05-19 6:49 ` Anshuman Gupta
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 17/23] drm/i915/display: Add PSR interrupt error check function Matt Roper
2021-05-17 17:03 ` Souza, Jose
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 18/23] drm/i915/display: Introduce new intel_psr_pause/resume function Matt Roper
2021-05-17 16:58 ` Souza, Jose
2021-05-18 9:33 ` Mun, Gwan-gyeong
2021-05-18 11:06 ` Ville Syrjälä
2021-05-21 10:58 ` Mun, Gwan-gyeong
2021-05-21 21:52 ` Souza, Jose
2021-06-01 10:23 ` Mun, Gwan-gyeong
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 19/23] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-05-17 23:02 ` Clint Taylor
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 20/23] drm/i915/adl_p: Add PLL Support Matt Roper
2021-05-17 21:55 ` Clint Taylor
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 21/23] drm/i915/adl_p: Program DP/HDMI link rate to DDI_BUF_CTL Matt Roper
2021-05-17 17:01 ` Souza, Jose
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 22/23] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-05-17 21:46 ` Clint Taylor
2021-05-15 3:10 ` [Intel-gfx] [PATCH v4 23/23] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-05-17 17:02 ` Souza, Jose
2021-05-15 4:51 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Alder Lake-P Support (rev3) Patchwork
2021-05-15 4:53 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-05-15 5:22 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2021-05-17 23:41 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for Alder Lake-P Support (rev4) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210517064938.GA17429@intel.com \
--to=stanislav.lisovskiy@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox