Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 00/22] drm/i915: Improve BW management on shared display links
Date: Thu, 24 Aug 2023 11:04:55 +0300	[thread overview]
Message-ID: <20230824080517.693621-1-imre.deak@intel.com> (raw)

This is v2 of [1], with the following changes:

- Add helpers to convert between fractional and integer bpp values
  instead of open coding these. (Jani)
- Increase back pipe B's link bpp after it was reduced due to a BW
  limit on FDI wrt. pipe C and then pipe C gets disabled. (Patch 8)
- Fix various MST DSC issues. (Patch 16-20)
- Add missing DocBook descriptions.

Tested on IVB, TGL, ADLP.

[1] https://lore.kernel.org/intel-gfx/20230817161456.3857111-1-imre.deak@intel.com

Imre Deak (22):
  drm/i915/dp: Factor out helpers to compute the link limits
  drm/i915/dp: Track the pipe and link bpp limits separately
  drm/i915/dp: Skip computing a non-DSC link config if DSC is needed
  drm/i915/dp: Update the link bpp limits for DSC mode
  drm/i915/dp: Limit the output link bpp in DSC mode
  drm/i915: Add helper to modeset a set of pipes
  drm/i915: Factor out a helper to check/compute all the CRTC states
  drm/i915/fdi: Improve FDI BW sharing between pipe B and C
  drm/dp_mst: Fix fractional bpp scaling in drm_dp_calc_pbn_mode()
  drm/dp_mst: Add a way to calculate PBN values with FEC overhead
  drm/dp_mst: Add helper to determine if an MST port is downstream of
    another port
  drm/dp_mst: Factor out a helper to check the atomic state of a
    topology manager
  drm/dp_mst: Swap the order of checking root vs. non-root port BW
    limitations
  drm/i915/dp_mst: Fix PBN calculation with FEC overhead
  drm/i915/dp_mst: Add atomic state for all streams on pre-tgl platforms
  drm/i915/dp_mst: Program the DSC PPS SDP for each stream
  drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is
    disabled
  drm/i915/dp_mst: Enable DSC decompression if any stream needs this
  drm/i915/dp_mst: Add missing DSC compression disabling
  drm/i915/dp_mst: Allow DSC only for sink ports of the first branch
    device
  drm/i915/dp_mst: Improve BW sharing between MST streams
  drm/i915/dp_mst: Check BW limitations only after all streams are
    computed

 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   2 +-
 .../display/amdgpu_dm/amdgpu_dm_mst_types.c   |   2 +-
 drivers/gpu/drm/display/drm_dp_mst_topology.c | 171 +++++++++--
 drivers/gpu/drm/i915/display/g4x_hdmi.c       |   5 +-
 drivers/gpu/drm/i915/display/intel_atomic.c   | 217 ++++++++++++++
 drivers/gpu/drm/i915/display/intel_atomic.h   |   8 +
 drivers/gpu/drm/i915/display/intel_crt.c      |   7 +
 drivers/gpu/drm/i915/display/intel_crtc.c     |   1 +
 drivers/gpu/drm/i915/display/intel_ddi.c      |  12 +-
 drivers/gpu/drm/i915/display/intel_display.c  | 164 +++++++----
 drivers/gpu/drm/i915/display/intel_display.h  |   7 +
 .../drm/i915/display/intel_display_types.h    |  30 +-
 drivers/gpu/drm/i915/display/intel_dp.c       | 185 +++++++++---
 drivers/gpu/drm/i915/display/intel_dp.h       |  17 +-
 drivers/gpu/drm/i915/display/intel_dp_mst.c   | 278 +++++++++++++++---
 drivers/gpu/drm/i915/display/intel_dp_mst.h   |   3 +
 drivers/gpu/drm/i915/display/intel_fdi.c      | 137 +++++++--
 drivers/gpu/drm/i915/display/intel_fdi.h      |   5 +
 drivers/gpu/drm/i915/display/intel_lvds.c     |   9 +-
 drivers/gpu/drm/i915/display/intel_sdvo.c     |   9 +-
 drivers/gpu/drm/i915/display/intel_vdsc.c     |   6 +
 drivers/gpu/drm/nouveau/dispnv50/disp.c       |   2 +-
 .../gpu/drm/tests/drm_dp_mst_helper_test.c    |  31 +-
 include/drm/display/drm_dp_mst_helper.h       |   9 +-
 24 files changed, 1107 insertions(+), 210 deletions(-)

-- 
2.37.2


             reply	other threads:[~2023-08-24  8:05 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-24  8:04 Imre Deak [this message]
2023-08-24  8:04 ` [Intel-gfx] [PATCH v2 01/22] drm/i915/dp: Factor out helpers to compute the link limits Imre Deak
2023-09-04  3:19   ` Ville Syrjälä
2023-09-04 10:25     ` Imre Deak
2023-08-24  8:04 ` [Intel-gfx] [PATCH v2 02/22] drm/i915/dp: Track the pipe and link bpp limits separately Imre Deak
2023-09-14  9:33   ` Luca Coelho
2023-09-14  9:55     ` Imre Deak
2023-09-14 10:51       ` Luca Coelho
2023-09-14 11:08         ` Imre Deak
2023-09-14 12:08           ` Luca Coelho
2023-08-24  8:04 ` [Intel-gfx] [PATCH v2 03/22] drm/i915/dp: Skip computing a non-DSC link config if DSC is needed Imre Deak
2023-09-04  3:24   ` Ville Syrjälä
2023-08-24  8:04 ` [Intel-gfx] [PATCH v2 04/22] drm/i915/dp: Update the link bpp limits for DSC mode Imre Deak
2023-09-04  3:48   ` Ville Syrjälä
2023-09-04 11:08     ` Imre Deak
2023-09-05  5:25       ` Ville Syrjälä
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 05/22] drm/i915/dp: Limit the output link bpp in " Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 06/22] drm/i915: Add helper to modeset a set of pipes Imre Deak
2023-09-08 19:25   ` Ville Syrjälä
2023-09-08 20:08     ` Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 07/22] drm/i915: Factor out a helper to check/compute all the CRTC states Imre Deak
2023-09-08 19:31   ` Ville Syrjälä
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 08/22] drm/i915/fdi: Improve FDI BW sharing between pipe B and C Imre Deak
2023-09-11 18:59   ` Ville Syrjälä
2023-09-11 20:42     ` Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 09/22] drm/dp_mst: Fix fractional bpp scaling in drm_dp_calc_pbn_mode() Imre Deak
2023-08-30 21:27   ` Lyude Paul
2023-09-04  2:53   ` Ville Syrjälä
2023-09-04 10:22     ` Imre Deak
2023-09-06 10:45       ` Ville Syrjälä
2023-09-06 11:14         ` Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 10/22] drm/dp_mst: Add a way to calculate PBN values with FEC overhead Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 11/22] drm/dp_mst: Add helper to determine if an MST port is downstream of another port Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 12/22] drm/dp_mst: Factor out a helper to check the atomic state of a topology manager Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 13/22] drm/dp_mst: Swap the order of checking root vs. non-root port BW limitations Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 14/22] drm/i915/dp_mst: Fix PBN calculation with FEC overhead Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 15/22] drm/i915/dp_mst: Add atomic state for all streams on pre-tgl platforms Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 16/22] drm/i915/dp_mst: Program the DSC PPS SDP for each stream Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 17/22] drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is disabled Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 18/22] drm/i915/dp_mst: Enable DSC decompression if any stream needs this Imre Deak
2023-08-24  9:31   ` Lisovskiy, Stanislav
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 19/22] drm/i915/dp_mst: Add missing DSC compression disabling Imre Deak
2023-08-24  9:44   ` Lisovskiy, Stanislav
2023-08-24 10:37     ` Imre Deak
2023-09-11 12:29   ` Lisovskiy, Stanislav
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 20/22] drm/i915/dp_mst: Allow DSC only for sink ports of the first branch device Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 21/22] drm/i915/dp_mst: Improve BW sharing between MST streams Imre Deak
2023-08-24  8:05 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/dp_mst: Check BW limitations only after all streams are computed Imre Deak
2023-09-25  7:46   ` Lisovskiy, Stanislav
2023-08-24  9:54 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Improve BW management on shared display links (rev2) Patchwork
2023-08-24  9:54 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-08-24 10:07 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-08-24 17:54 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-09-04  7:14 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915: Improve BW management on shared display links (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230824080517.693621-1-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox