From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 01/22] drm/i915/dp: Factor out helpers to compute the link limits
Date: Thu, 24 Aug 2023 11:04:56 +0300 [thread overview]
Message-ID: <20230824080517.693621-2-imre.deak@intel.com> (raw)
In-Reply-To: <20230824080517.693621-1-imre.deak@intel.com>
Factor out helpers that DP / DP_MST encoders can use to compute the link
rate/lane count and bpp limits. A follow-up patch will call these to
recalculate the limits if DSC compression is required.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 61 +++++++++++++--------
drivers/gpu/drm/i915/display/intel_dp_mst.c | 52 ++++++++++--------
2 files changed, 68 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 7067ee3a4bd36..53697f361f950 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2187,29 +2187,25 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
return 0;
}
-static int
-intel_dp_compute_link_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config,
- struct drm_connector_state *conn_state,
- bool respect_downstream_limits)
+static void
+intel_dp_compute_config_limits(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state,
+ bool respect_downstream_limits,
+ struct link_config_limits *limits)
{
- struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
const struct drm_display_mode *adjusted_mode =
- &pipe_config->hw.adjusted_mode;
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct link_config_limits limits;
- bool joiner_needs_dsc = false;
- int ret;
+ &crtc_state->hw.adjusted_mode;
- limits.min_rate = intel_dp_common_rate(intel_dp, 0);
- limits.max_rate = intel_dp_max_link_rate(intel_dp);
+ limits->min_rate = intel_dp_common_rate(intel_dp, 0);
+ limits->max_rate = intel_dp_max_link_rate(intel_dp);
- limits.min_lane_count = 1;
- limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
+ limits->min_lane_count = 1;
+ limits->max_lane_count = intel_dp_max_lane_count(intel_dp);
- limits.min_bpp = intel_dp_min_bpp(pipe_config->output_format);
- limits.max_bpp = intel_dp_max_bpp(intel_dp, pipe_config, respect_downstream_limits);
+ limits->min_bpp = intel_dp_min_bpp(crtc_state->output_format);
+ limits->max_bpp = intel_dp_max_bpp(intel_dp, crtc_state,
+ respect_downstream_limits);
if (intel_dp->use_max_params) {
/*
@@ -2220,16 +2216,35 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
* configuration, and typically on older panels these
* values correspond to the native resolution of the panel.
*/
- limits.min_lane_count = limits.max_lane_count;
- limits.min_rate = limits.max_rate;
+ limits->min_lane_count = limits->max_lane_count;
+ limits->min_rate = limits->max_rate;
}
- intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits);
+ intel_dp_adjust_compliance_config(intel_dp, crtc_state, limits);
drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i "
"max rate %d max bpp %d pixel clock %iKHz\n",
- limits.max_lane_count, limits.max_rate,
- limits.max_bpp, adjusted_mode->crtc_clock);
+ limits->max_lane_count, limits->max_rate,
+ limits->max_bpp, adjusted_mode->crtc_clock);
+}
+
+static int
+intel_dp_compute_link_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config,
+ struct drm_connector_state *conn_state,
+ bool respect_downstream_limits)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
+ const struct drm_display_mode *adjusted_mode =
+ &pipe_config->hw.adjusted_mode;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct link_config_limits limits;
+ bool joiner_needs_dsc = false;
+ int ret;
+
+ intel_dp_compute_config_limits(intel_dp, pipe_config,
+ respect_downstream_limits, &limits);
if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
adjusted_mode->crtc_clock))
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 3eb085fbc7c82..218c2dfd57adc 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -306,6 +306,35 @@ static bool intel_dp_mst_has_audio(const struct drm_connector_state *conn_state)
return intel_conn_state->force_audio == HDMI_AUDIO_ON;
}
+static void
+intel_dp_mst_compute_config_limits(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state,
+ struct link_config_limits *limits)
+{
+ /*
+ * for MST we always configure max link bw - the spec doesn't
+ * seem to suggest we should do otherwise.
+ */
+ limits->min_rate = limits->max_rate =
+ intel_dp_max_link_rate(intel_dp);
+
+ limits->min_lane_count = limits->max_lane_count =
+ intel_dp_max_lane_count(intel_dp);
+
+ limits->min_bpp = intel_dp_min_bpp(crtc_state->output_format);
+ /*
+ * FIXME: If all the streams can't fit into the link with
+ * their current pipe_bpp we should reduce pipe_bpp across
+ * the board until things start to fit. Until then we
+ * limit to <= 8bpc since that's what was hardcoded for all
+ * MST streams previously. This hack should be removed once
+ * we have the proper retry logic in place.
+ */
+ limits->max_bpp = min(crtc_state->pipe_bpp, 24);
+
+ intel_dp_adjust_compliance_config(intel_dp, crtc_state, limits);
+}
+
static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
@@ -329,28 +358,7 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
intel_dp_mst_has_audio(conn_state) &&
intel_audio_compute_config(encoder, pipe_config, conn_state);
- /*
- * for MST we always configure max link bw - the spec doesn't
- * seem to suggest we should do otherwise.
- */
- limits.min_rate =
- limits.max_rate = intel_dp_max_link_rate(intel_dp);
-
- limits.min_lane_count =
- limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
-
- limits.min_bpp = intel_dp_min_bpp(pipe_config->output_format);
- /*
- * FIXME: If all the streams can't fit into the link with
- * their current pipe_bpp we should reduce pipe_bpp across
- * the board until things start to fit. Until then we
- * limit to <= 8bpc since that's what was hardcoded for all
- * MST streams previously. This hack should be removed once
- * we have the proper retry logic in place.
- */
- limits.max_bpp = min(pipe_config->pipe_bpp, 24);
-
- intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits);
+ intel_dp_mst_compute_config_limits(intel_dp, pipe_config, &limits);
ret = intel_dp_mst_compute_link_config(encoder, pipe_config,
conn_state, &limits);
--
2.37.2
next prev parent reply other threads:[~2023-08-24 8:05 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-24 8:04 [Intel-gfx] [PATCH v2 00/22] drm/i915: Improve BW management on shared display links Imre Deak
2023-08-24 8:04 ` Imre Deak [this message]
2023-09-04 3:19 ` [Intel-gfx] [PATCH v2 01/22] drm/i915/dp: Factor out helpers to compute the link limits Ville Syrjälä
2023-09-04 10:25 ` Imre Deak
2023-08-24 8:04 ` [Intel-gfx] [PATCH v2 02/22] drm/i915/dp: Track the pipe and link bpp limits separately Imre Deak
2023-09-14 9:33 ` Luca Coelho
2023-09-14 9:55 ` Imre Deak
2023-09-14 10:51 ` Luca Coelho
2023-09-14 11:08 ` Imre Deak
2023-09-14 12:08 ` Luca Coelho
2023-08-24 8:04 ` [Intel-gfx] [PATCH v2 03/22] drm/i915/dp: Skip computing a non-DSC link config if DSC is needed Imre Deak
2023-09-04 3:24 ` Ville Syrjälä
2023-08-24 8:04 ` [Intel-gfx] [PATCH v2 04/22] drm/i915/dp: Update the link bpp limits for DSC mode Imre Deak
2023-09-04 3:48 ` Ville Syrjälä
2023-09-04 11:08 ` Imre Deak
2023-09-05 5:25 ` Ville Syrjälä
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 05/22] drm/i915/dp: Limit the output link bpp in " Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 06/22] drm/i915: Add helper to modeset a set of pipes Imre Deak
2023-09-08 19:25 ` Ville Syrjälä
2023-09-08 20:08 ` Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 07/22] drm/i915: Factor out a helper to check/compute all the CRTC states Imre Deak
2023-09-08 19:31 ` Ville Syrjälä
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 08/22] drm/i915/fdi: Improve FDI BW sharing between pipe B and C Imre Deak
2023-09-11 18:59 ` Ville Syrjälä
2023-09-11 20:42 ` Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 09/22] drm/dp_mst: Fix fractional bpp scaling in drm_dp_calc_pbn_mode() Imre Deak
2023-08-30 21:27 ` Lyude Paul
2023-09-04 2:53 ` Ville Syrjälä
2023-09-04 10:22 ` Imre Deak
2023-09-06 10:45 ` Ville Syrjälä
2023-09-06 11:14 ` Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 10/22] drm/dp_mst: Add a way to calculate PBN values with FEC overhead Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 11/22] drm/dp_mst: Add helper to determine if an MST port is downstream of another port Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 12/22] drm/dp_mst: Factor out a helper to check the atomic state of a topology manager Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 13/22] drm/dp_mst: Swap the order of checking root vs. non-root port BW limitations Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 14/22] drm/i915/dp_mst: Fix PBN calculation with FEC overhead Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 15/22] drm/i915/dp_mst: Add atomic state for all streams on pre-tgl platforms Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 16/22] drm/i915/dp_mst: Program the DSC PPS SDP for each stream Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 17/22] drm/i915/dp: Make sure the DSC PPS SDP is disabled whenever DSC is disabled Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 18/22] drm/i915/dp_mst: Enable DSC decompression if any stream needs this Imre Deak
2023-08-24 9:31 ` Lisovskiy, Stanislav
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 19/22] drm/i915/dp_mst: Add missing DSC compression disabling Imre Deak
2023-08-24 9:44 ` Lisovskiy, Stanislav
2023-08-24 10:37 ` Imre Deak
2023-09-11 12:29 ` Lisovskiy, Stanislav
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 20/22] drm/i915/dp_mst: Allow DSC only for sink ports of the first branch device Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 21/22] drm/i915/dp_mst: Improve BW sharing between MST streams Imre Deak
2023-08-24 8:05 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/dp_mst: Check BW limitations only after all streams are computed Imre Deak
2023-09-25 7:46 ` Lisovskiy, Stanislav
2023-08-24 9:54 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Improve BW management on shared display links (rev2) Patchwork
2023-08-24 9:54 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-08-24 10:07 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-08-24 17:54 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-09-04 7:14 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915: Improve BW management on shared display links (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230824080517.693621-2-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox