Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 01/22] drm/i915/bios: Use the cached BDB version
Date: Thu, 07 Apr 2022 13:10:08 +0300	[thread overview]
Message-ID: <87mtgx5hmn.fsf@intel.com> (raw)
In-Reply-To: <20220405173410.11436-2-ville.syrjala@linux.intel.com>

On Tue, 05 Apr 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> We have the BDB version cached, use it. We're going to have to
> start doing some of the BDB block parsing later, at which point
> we may no longer have the VBT around anymore (we free it at the
> end of intel_bios_init() when it didn't come via OpRegion).
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_bios.c | 54 +++++++++++------------
>  1 file changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
> index 556169ce0544..5518f4cfa1b1 100644
> --- a/drivers/gpu/drm/i915/display/intel_bios.c
> +++ b/drivers/gpu/drm/i915/display/intel_bios.c
> @@ -415,7 +415,7 @@ parse_panel_dtd(struct drm_i915_private *i915,
>  	 * try the new generic DTD block first on VBT >= 229, but still fall
>  	 * back to trying the old LFP block if that fails.
>  	 */
> -	if (bdb->version >= 229)
> +	if (i915->vbt.version >= 229)
>  		parse_generic_dtd(i915, bdb);
>  	if (!i915->vbt.lfp_lvds_vbt_mode)
>  		parse_lfp_panel_dtd(i915, bdb);
> @@ -452,12 +452,12 @@ parse_lfp_backlight(struct drm_i915_private *i915,
>  	}
>  
>  	i915->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI;
> -	if (bdb->version >= 191) {
> +	if (i915->vbt.version >= 191) {
>  		size_t exp_size;
>  
> -		if (bdb->version >= 236)
> +		if (i915->vbt.version >= 236)
>  			exp_size = sizeof(struct bdb_lfp_backlight_data);
> -		else if (bdb->version >= 234)
> +		else if (i915->vbt.version >= 234)
>  			exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_234;
>  		else
>  			exp_size = EXP_BDB_LFP_BL_DATA_SIZE_REV_191;
> @@ -474,14 +474,14 @@ parse_lfp_backlight(struct drm_i915_private *i915,
>  	i915->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
>  	i915->vbt.backlight.active_low_pwm = entry->active_low_pwm;
>  
> -	if (bdb->version >= 234) {
> +	if (i915->vbt.version >= 234) {
>  		u16 min_level;
>  		bool scale;
>  
>  		level = backlight_data->brightness_level[panel_type].level;
>  		min_level = backlight_data->brightness_min_level[panel_type].level;
>  
> -		if (bdb->version >= 236)
> +		if (i915->vbt.version >= 236)
>  			scale = backlight_data->brightness_precision_bits[panel_type] == 16;
>  		else
>  			scale = level > 255;
> @@ -581,7 +581,7 @@ parse_general_features(struct drm_i915_private *i915,
>  
>  	i915->vbt.int_tv_support = general->int_tv_support;
>  	/* int_crt_support can't be trusted on earlier platforms */
> -	if (bdb->version >= 155 &&
> +	if (i915->vbt.version >= 155 &&
>  	    (HAS_DDI(i915) || IS_VALLEYVIEW(i915)))
>  		i915->vbt.int_crt_support = general->int_crt_support;
>  	i915->vbt.lvds_use_ssc = general->enable_ssc;
> @@ -589,7 +589,7 @@ parse_general_features(struct drm_i915_private *i915,
>  		intel_bios_ssc_frequency(i915, general->ssc_freq);
>  	i915->vbt.display_clock_mode = general->display_clock_mode;
>  	i915->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
> -	if (bdb->version >= 181) {
> +	if (i915->vbt.version >= 181) {
>  		i915->vbt.orientation = general->rotate_180 ?
>  			DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP :
>  			DRM_MODE_PANEL_ORIENTATION_NORMAL;
> @@ -597,7 +597,7 @@ parse_general_features(struct drm_i915_private *i915,
>  		i915->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>  	}
>  
> -	if (bdb->version >= 249 && general->afc_startup_config) {
> +	if (i915->vbt.version >= 249 && general->afc_startup_config) {
>  		i915->vbt.override_afc_startup = true;
>  		i915->vbt.override_afc_startup_val = general->afc_startup_config == 0x1 ? 0x0 : 0x7;
>  	}
> @@ -724,13 +724,13 @@ parse_driver_features(struct drm_i915_private *i915,
>  		 * in the wild with the bits correctly populated. Version
>  		 * 108 (on i85x) does not have the bits correctly populated.
>  		 */
> -		if (bdb->version >= 134 &&
> +		if (i915->vbt.version >= 134 &&
>  		    driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS &&
>  		    driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS)
>  			i915->vbt.int_lvds_support = 0;
>  	}
>  
> -	if (bdb->version < 228) {
> +	if (i915->vbt.version < 228) {
>  		drm_dbg_kms(&i915->drm, "DRRS State Enabled:%d\n",
>  			    driver->drrs_enabled);
>  		/*
> @@ -753,7 +753,7 @@ parse_power_conservation_features(struct drm_i915_private *i915,
>  	const struct bdb_lfp_power *power;
>  	u8 panel_type = i915->vbt.panel_type;
>  
> -	if (bdb->version < 228)
> +	if (i915->vbt.version < 228)
>  		return;
>  
>  	power = find_section(bdb, BDB_LFP_POWER);
> @@ -771,7 +771,7 @@ parse_power_conservation_features(struct drm_i915_private *i915,
>  	if (!(power->drrs & BIT(panel_type)))
>  		i915->vbt.drrs_type = DRRS_TYPE_NONE;
>  
> -	if (bdb->version >= 232)
> +	if (i915->vbt.version >= 232)
>  		i915->vbt.edp.hobl = power->hobl & BIT(panel_type);
>  }
>  
> @@ -876,7 +876,7 @@ parse_edp(struct drm_i915_private *i915, const struct bdb_header *bdb)
>  		break;
>  	}
>  
> -	if (bdb->version >= 173) {
> +	if (i915->vbt.version >= 173) {
>  		u8 vswing;
>  
>  		/* Don't read from VBT if module parameter has valid value*/
> @@ -919,7 +919,7 @@ parse_psr(struct drm_i915_private *i915, const struct bdb_header *bdb)
>  	 * New psr options 0=500us, 1=100us, 2=2500us, 3=0us
>  	 * Old decimal value is wake up time in multiples of 100 us.
>  	 */
> -	if (bdb->version >= 205 &&
> +	if (i915->vbt.version >= 205 &&
>  	    (DISPLAY_VER(i915) >= 9 && !IS_BROXTON(i915))) {
>  		switch (psr_table->tp1_wakeup_time) {
>  		case 0:
> @@ -965,7 +965,7 @@ parse_psr(struct drm_i915_private *i915, const struct bdb_header *bdb)
>  		i915->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100;
>  	}
>  
> -	if (bdb->version >= 226) {
> +	if (i915->vbt.version >= 226) {
>  		u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time;
>  
>  		wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3;
> @@ -1085,7 +1085,7 @@ parse_mipi_config(struct drm_i915_private *i915,
>  		return;
>  	}
>  
> -	parse_dsi_backlight_ports(i915, bdb->version, port);
> +	parse_dsi_backlight_ports(i915, i915->vbt.version, port);
>  
>  	/* FIXME is the 90 vs. 270 correct? */
>  	switch (config->rotation) {
> @@ -1448,7 +1448,7 @@ parse_compression_parameters(struct drm_i915_private *i915,
>  	u16 block_size;
>  	int index;
>  
> -	if (bdb->version < 198)
> +	if (i915->vbt.version < 198)
>  		return;
>  
>  	params = find_section(bdb, BDB_COMPRESSION_PARAMETERS);
> @@ -2117,31 +2117,31 @@ parse_general_definitions(struct drm_i915_private *i915,
>  	if (intel_gmbus_is_valid_pin(i915, bus_pin))
>  		i915->vbt.crt_ddc_pin = bus_pin;
>  
> -	if (bdb->version < 106) {
> +	if (i915->vbt.version < 106) {
>  		expected_size = 22;
> -	} else if (bdb->version < 111) {
> +	} else if (i915->vbt.version < 111) {
>  		expected_size = 27;
> -	} else if (bdb->version < 195) {
> +	} else if (i915->vbt.version < 195) {
>  		expected_size = LEGACY_CHILD_DEVICE_CONFIG_SIZE;
> -	} else if (bdb->version == 195) {
> +	} else if (i915->vbt.version == 195) {
>  		expected_size = 37;
> -	} else if (bdb->version <= 215) {
> +	} else if (i915->vbt.version <= 215) {
>  		expected_size = 38;
> -	} else if (bdb->version <= 237) {
> +	} else if (i915->vbt.version <= 237) {
>  		expected_size = 39;
>  	} else {
>  		expected_size = sizeof(*child);
>  		BUILD_BUG_ON(sizeof(*child) < 39);
>  		drm_dbg(&i915->drm,
>  			"Expected child device config size for VBT version %u not known; assuming %u\n",
> -			bdb->version, expected_size);
> +			i915->vbt.version, expected_size);
>  	}
>  
>  	/* Flag an error for unexpected size, but continue anyway. */
>  	if (defs->child_dev_size != expected_size)
>  		drm_err(&i915->drm,
>  			"Unexpected child device config size %u (expected %u for VBT version %u)\n",
> -			defs->child_dev_size, expected_size, bdb->version);
> +			defs->child_dev_size, expected_size, i915->vbt.version);
>  
>  	/* The legacy sized child device config is the minimum we need. */
>  	if (defs->child_dev_size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) {
> @@ -2497,7 +2497,7 @@ void intel_bios_init(struct drm_i915_private *i915)
>  
>  	drm_dbg_kms(&i915->drm,
>  		    "VBT signature \"%.*s\", BDB version %d\n",
> -		    (int)sizeof(vbt->signature), vbt->signature, bdb->version);
> +		    (int)sizeof(vbt->signature), vbt->signature, i915->vbt.version);
>  
>  	/* Grab useful general definitions */
>  	parse_general_features(i915, bdb);

-- 
Jani Nikula, Intel Open Source Graphics Center

  reply	other threads:[~2022-04-07 10:10 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-05 17:33 [Intel-gfx] [PATCH v2 00/22] drm/i915/bios: Rework BDB block handling and PNPID->panel_type matching Ville Syrjala
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 01/22] drm/i915/bios: Use the cached BDB version Ville Syrjala
2022-04-07 10:10   ` Jani Nikula [this message]
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 02/22] drm/i915/bios: Make copies of VBT data blocks Ville Syrjala
2022-04-06 13:38   ` [Intel-gfx] [PATCH v3 " Ville Syrjala
2022-04-07 10:23     ` Jani Nikula
2022-04-07 11:18       ` Ville Syrjälä
2022-04-07 12:06         ` Jani Nikula
2022-04-07 12:23           ` Ville Syrjälä
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 03/22] drm/i915/bios: Use the copy of the LFP data table always Ville Syrjala
2022-04-07 10:36   ` Jani Nikula
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 04/22] drm/i915/bios: Validate LFP data table pointers Ville Syrjala
2022-04-07 16:07   ` Jani Nikula
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 05/22] drm/i915/bios: Trust the LFP data pointers Ville Syrjala
2022-04-07 16:12   ` Jani Nikula
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 06/22] drm/i915/bios: Validate the panel_name table Ville Syrjala
2022-04-07 16:14   ` Jani Nikula
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 07/22] drm/i915/bios: Reorder panel DTD parsing Ville Syrjala
2022-04-07 16:21   ` Jani Nikula
2022-04-08 13:59     ` Ville Syrjälä
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 08/22] drm/i915/bios: Generate LFP data table pointers if the VBT lacks them Ville Syrjala
2022-04-06 13:39   ` [Intel-gfx] [PATCH v3 " Ville Syrjala
2022-04-07 12:24     ` Jani Nikula
2022-04-07 12:29       ` Ville Syrjälä
2022-04-07 16:53     ` Jani Nikula
2022-04-07 18:18       ` Jani Nikula
2022-04-12  8:19       ` Ville Syrjälä
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 09/22] drm/i915/bios: Get access to the tail end of the LFP data block Ville Syrjala
2022-04-06 13:40   ` [Intel-gfx] [PATCH v3 " Ville Syrjala
2022-04-07 17:07     ` Jani Nikula
2022-04-08 14:04       ` Ville Syrjälä
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 10/22] drm/i915/bios: Assume panel_type==0 if the VBT has bogus data Ville Syrjala
2022-04-07 17:11   ` Jani Nikula
2022-04-05 17:33 ` [Intel-gfx] [PATCH v2 11/22] drm/i915/bios: Split parse_driver_features() into two parts Ville Syrjala
2022-04-07 17:13   ` Jani Nikula
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 12/22] drm/i915/bios: Split VBT parsing to global vs. panel specific parts Ville Syrjala
2022-04-07 17:23   ` Jani Nikula
2022-04-08 14:09     ` Ville Syrjälä
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 13/22] drm/i915/pps: Split PPS init+sanitize in two Ville Syrjala
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 14/22] drm/i915/pps: Reinit PPS delays after VBT has been fully parsed Ville Syrjala
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 15/22] drm/i915/bios: Do panel specific VBT parsing later Ville Syrjala
2022-04-06 19:05   ` [Intel-gfx] [PATCH v4 " Ville Syrjala
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 16/22] drm/i915/bios: Extract get_panel_type() Ville Syrjala
2022-04-07 17:26   ` Jani Nikula
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 17/22] drm/i915/bios: Refactor panel_type code Ville Syrjala
2022-04-07 17:49   ` Jani Nikula
2022-04-08 14:13     ` Ville Syrjälä
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 18/22] drm/i915/bios: Determine panel type via PNPID match Ville Syrjala
2022-04-06 19:09   ` [Intel-gfx] [PATCH v4 " Ville Syrjala
2022-04-07 17:55     ` Jani Nikula
2022-04-08 14:51       ` Ville Syrjälä
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 19/22] drm/i915/bios: Parse the seamless DRRS min refresh rate Ville Syrjala
2022-04-07 17:56   ` Jani Nikula
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 20/22] drm/i915: Respect VBT " Ville Syrjala
2022-04-07 18:01   ` Jani Nikula
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 21/22] drm/edid: Extract drm_edid_decode_mfg_id() Ville Syrjala
2022-04-07 18:02   ` Jani Nikula
2022-04-05 17:34 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/bios: Dump PNPID and panel name Ville Syrjala
2022-04-07 18:07   ` Jani Nikula
2022-04-08 14:52     ` Ville Syrjälä
2022-04-05 22:55 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/bios: Rework BDB block handling and PNPID->panel_type matching Patchwork
2022-04-05 22:57 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-04-05 23:02 ` [Intel-gfx] ✗ Fi.CI.DOCS: " Patchwork
2022-04-05 23:27 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-04-06 18:17 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/bios: Rework BDB block handling and PNPID->panel_type matching (rev4) Patchwork
2022-04-06 18:19 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-04-06 18:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-04-07  0:11 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/bios: Rework BDB block handling and PNPID->panel_type matching (rev6) Patchwork
2022-04-07  0:14 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-04-07  0:44 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-04-07  8:37 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87mtgx5hmn.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox