Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Atwood <matthew.s.atwood@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Mika Kahola <mika.kahola@intel.com>,
	Matt Atwood <matthew.s.atwood@intel.com>
Subject: [PATCH 12/12] drm/i915/xe3lpd: Power request asserting/deasserting
Date: Fri, 18 Oct 2024 13:49:41 -0700	[thread overview]
Message-ID: <20241018204941.73473-13-matthew.s.atwood@intel.com> (raw)
In-Reply-To: <20241018204941.73473-1-matthew.s.atwood@intel.com>

From: Mika Kahola <mika.kahola@intel.com>

There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.

The sequence is the following

1. Read mailbox command status and wait until run/busy bit is
   clear
2. Write mailbox data value '1' for power request asserting
   and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
   before continuing power request.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
---
 drivers/gpu/drm/i915/display/intel_tc.c | 40 +++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h         |  7 +++++
 2 files changed, 47 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index 6f2ee7dbc43b..7d9f87db381c 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -1013,6 +1013,39 @@ xelpdp_tc_phy_wait_for_tcss_power(struct intel_tc_port *tc, bool enabled)
 	return true;
 }
 
+static bool xelpdp_tc_phy_wait_for_tcss_ready(struct drm_i915_private *i915,
+					      bool enable)
+{
+	if (DISPLAY_VER(i915) < 30)
+		return true;
+
+	/* check if mailbox is running busy */
+	if (intel_de_wait_for_clear(i915, TCSS_DISP_MAILBOX_IN_CMD,
+				    TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY, 10)) {
+		drm_dbg_kms(&i915->drm,
+			    "timeout waiting for TCSS mailbox run/busy bit to clear\n");
+		return false;
+	}
+
+	if (enable)
+		intel_de_write(i915, TCSS_DISP_MAILBOX_IN_DATA, 1);
+	else
+		intel_de_write(i915, TCSS_DISP_MAILBOX_IN_DATA, 0);
+
+	intel_de_write(i915, TCSS_DISP_MAILBOX_IN_CMD,
+		       TCSS_DISP_MAILBOX_IN_CMD_DATA(1));
+
+	/* wait to clear mailbox running busy bit before continuing */
+	if (intel_de_wait_for_clear(i915, TCSS_DISP_MAILBOX_IN_CMD,
+				    TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY, 10)) {
+		drm_dbg_kms(&i915->drm,
+			    "timeout waiting for TCSS mailbox run/busy bit to clear\n");
+		return false;
+	}
+
+	return true;
+}
+
 static void __xelpdp_tc_phy_enable_tcss_power(struct intel_tc_port *tc, bool enable)
 {
 	struct drm_i915_private *i915 = tc_to_i915(tc);
@@ -1022,6 +1055,13 @@ static void __xelpdp_tc_phy_enable_tcss_power(struct intel_tc_port *tc, bool ena
 
 	assert_tc_cold_blocked(tc);
 
+	/*
+	 * Gfx driver workaround for PTL tcss_rxdetect_clkswb_req/ack handshake
+	 * violation when pwwreq= 0->1 during TC7/10 entry
+	 */
+	drm_WARN_ON(&i915->drm,
+		    !xelpdp_tc_phy_wait_for_tcss_ready(i915, enable));
+
 	val = intel_de_read(i915, reg);
 	if (enable)
 		val |= XELPDP_TCSS_POWER_REQUEST;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2743a2dd0a3d..d2775a32bf18 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4539,6 +4539,13 @@ enum skl_power_gate {
 #define  TCSS_DDI_STATUS_HPD_LIVE_STATUS_TBT	REG_BIT(1)
 #define  TCSS_DDI_STATUS_HPD_LIVE_STATUS_ALT	REG_BIT(0)
 
+#define TCSS_DISP_MAILBOX_IN_CMD		_MMIO(0x161300)
+#define   TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY	REG_BIT(31)
+#define   TCSS_DISP_MAILBOX_IN_CMD_CMD_MASK	REG_GENMASK(7, 0)
+#define   TCSS_DISP_MAILBOX_IN_CMD_DATA(x)	TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY | \
+						REG_FIELD_PREP(TCSS_DISP_MAILBOX_IN_CMD_CMD_MASK, (x))
+#define TCSS_DISP_MAILBOX_IN_DATA		_MMIO(0x161304)
+
 #define PRIMARY_SPI_TRIGGER			_MMIO(0x102040)
 #define PRIMARY_SPI_ADDRESS			_MMIO(0x102080)
 #define PRIMARY_SPI_REGIONID			_MMIO(0x102084)
-- 
2.45.0


  parent reply	other threads:[~2024-10-18 20:50 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-18 20:49 [PATCH 00/12] drm/i915/xe3lpd: ptl display patches Matt Atwood
2024-10-18 20:49 ` [PATCH 01/12] drm/i915/display/ptl: Fill VRR crtc_state timings before other transcoder timings Matt Atwood
2024-10-18 23:43   ` Matt Roper
2024-10-22  4:37     ` Golani, Mitulkumar Ajitkumar
2024-10-18 20:49 ` [PATCH 02/12] drm/i915/ptl: Define IS_PANTHERLAKE macro Matt Atwood
2024-10-18 23:45   ` Matt Roper
2024-10-18 20:49 ` [PATCH 03/12] drm/i915/cx0: Extend C10 check to PTL Matt Atwood
2024-10-21 11:58   ` Gustavo Sousa
2024-10-21 12:02     ` Jani Nikula
2024-10-18 20:49 ` [PATCH 04/12] drm/i915/ptl: Move async flip bit to PLANE_SURF register Matt Atwood
2024-10-18 23:49   ` Matt Roper
2024-10-18 20:49 ` [PATCH 05/12] drm/i915/xe3: Underrun recovery does not exist post Xe2 Matt Atwood
2024-10-18 23:53   ` Matt Roper
2024-10-18 20:49 ` [PATCH 06/12] drm/i915/display/xe3: disable x-tiled framebuffers Matt Atwood
2024-10-21 12:25   ` Gustavo Sousa
2024-10-18 20:49 ` [PATCH 07/12] drm/i915/xe3lpd: Skip disabling VRR during modeset disable Matt Atwood
2024-10-18 20:49 ` [PATCH 08/12] drm/i915/xe3lpd: Increase resolution for plane to support 6k Matt Atwood
2024-10-19  7:07   ` Kandpal, Suraj
2024-10-18 20:49 ` [PATCH 09/12] drm/i915/xe3lpd: Increase max_h max_v for PSR Matt Atwood
2024-10-18 20:49 ` [PATCH 10/12] drm/i915/xe3lpd: Increase bigjoiner limitations Matt Atwood
2024-10-18 20:49 ` [PATCH 11/12] drm/i915/xe3lpd: Prune modes for YUV420 Matt Atwood
2024-10-18 20:49 ` Matt Atwood [this message]
2024-10-21 12:08   ` [PATCH 12/12] drm/i915/xe3lpd: Power request asserting/deasserting Jani Nikula
2024-10-21 12:30   ` Gustavo Sousa
2024-10-21 13:03     ` Kahola, Mika
2024-10-23 20:39   ` Gustavo Sousa
2024-10-28  9:11     ` Kahola, Mika
2024-10-18 22:08 ` ✓ CI.Patch_applied: success for drm/i915/xe3lpd: ptl display patches Patchwork
2024-10-18 22:09 ` ✗ CI.checkpatch: warning " Patchwork
2024-10-18 22:10 ` ✓ CI.KUnit: success " Patchwork
2024-10-18 22:21 ` ✓ CI.Build: " Patchwork
2024-10-18 22:24 ` ✓ CI.Hooks: " Patchwork
2024-10-18 22:25 ` ✗ CI.checksparse: warning " Patchwork
2024-10-18 22:44 ` ✗ CI.BAT: failure " Patchwork
2024-10-19 15:34 ` ✗ CI.FULL: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241018204941.73473-13-matthew.s.atwood@intel.com \
    --to=matthew.s.atwood@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=mika.kahola@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox