[PATCH v10 08/20] drm/xe/vsec: Use correct pm state get

["Michael J. Ruhl" <michael.j.ruhl@intel.com>]

Crashlog needs to be collected at all times.  The current pm check
assumes telemetry only.

Update read path to enable device for crashlog instances.

Include check of the WATCHER CAP_TYPE for completeness.
WATCHER is a possible type and needs to be accounted for, but is not
supported.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 2c402a801c19 ("platform/x86/intel/pmt: support BMG crashlog")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
---
 drivers/gpu/drm/xe/xe_vsec.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_vsec.c b/drivers/gpu/drm/xe/xe_vsec.c
index 1b88ac1d2448..1cb9a78ee0ef 100644
--- a/drivers/gpu/drm/xe/xe_vsec.c
+++ b/drivers/gpu/drm/xe/xe_vsec.c
@@ -145,6 +145,7 @@ int xe_pmt_telem_read(struct device *dev, u32 guid, u64 *data, loff_t user_offse
 {
 	struct xe_device *xe = kdev_to_xe_device(dev);
 	void __iomem *telem_addr = xe->mmio.regs + BMG_TELEMETRY_OFFSET;
+	u32 cap_type = FIELD_GET(GUID_CAP_TYPE, guid);
 	u32 mem_region;
 	u32 offset;
 	int ret;
@@ -157,9 +158,18 @@ int xe_pmt_telem_read(struct device *dev, u32 guid, u64 *data, loff_t user_offse
 
 	telem_addr += offset + user_offset;
 
-	/* indicate that we are not at an appropriate power level */
-	if (!xe_pm_runtime_get_if_active(xe))
-		return -ENODATA;
+	/* Always allow crashlog. Telemetry, only when powered */
+	switch (cap_type) {
+	case CRASHLOG:
+		xe_pm_runtime_get(xe);
+		break;
+	case TELEMETRY:
+		if (!xe_pm_runtime_get_if_active(xe))
+			return -ENODATA;
+		break;
+	case WATCHER:
+		return -EINVAL;
+	}
 
 	scoped_guard(mutex, &xe->pmt.lock) {
 		/* set SoC re-mapper index register based on GUID memory region */
-- 
2.43.0