From: Vladimir Murzin <vladimir.murzin@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, will@kernel.org, mark.rutland@arm.com,
maz@kernel.org, lpieralisi@kernel.org, ruanjinjie@huawei.com,
liaochang1@huawei.com
Subject: [PATCH 34/38] irqchip/gic-v3: Implement FEAT_GICv3_NMI support
Date: Mon, 14 Sep 2026 11:20:58 +0100 [thread overview]
Message-ID: <20260914102102.68597-35-vladimir.murzin@arm.com> (raw)
In-Reply-To: <20260914102102.68597-1-vladimir.murzin@arm.com>
From: Lorenzo Pieralisi <lpieralisi@kernel.org>
The FEAT_GICv3_NMI GIC feature coupled with the CPU FEAT_NMI enables
handling NMI interrupts in HW on aarch64, by adding a superpriority
interrupt to the existing GIC priority scheme.
Implement GIC driver support for the FEAT_GICv3_NMI feature.
Check, through the ARM64 capabilitity infrastructure, if support
for FEAT_NMI was detected on the core and the system has not overridden
the detection and forced pseudo-NMIs enablement.
If FEAT_NMI is detected, it was not overridden (check embedded in the
system_uses_nmi() call) and the GIC supports the FEAT_GICv3_NMI
feature, initialize NMIs related HW GIC registers and route irq to NMI
handling logic.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
drivers/irqchip/irq-gic-v3.c | 114 +++++++++++++++++++++++++++--
include/linux/irqchip/arm-gic-v3.h | 4 +
2 files changed, 111 insertions(+), 7 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6a807c226425..e2f2e5f29818 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -64,6 +64,7 @@ struct gic_chip_data {
u32 nr_redist_regions;
u64 flags;
bool has_rss;
+ bool has_nmi;
unsigned int ppi_nr;
struct partition_affinity *parts;
unsigned int nr_parts;
@@ -89,6 +90,9 @@ static DEFINE_STATIC_KEY_TRUE(supports_deactivate_key);
static bool pseudo_nmi_support_forbidden;
+static DEFINE_RAW_SPINLOCK(gic_nmi_lock);
+
+
/*
* There are 16 SGIs, though we only actually use 8 in Linux. The other 8 SGIs
* are potentially stolen by the secure side. Some code, especially code dealing
@@ -252,6 +256,37 @@ enum gic_intid_range {
__INVALID_RANGE__
};
+#ifdef CONFIG_ARM64
+#include <asm/cpufeature.h>
+
+static inline bool gic_supports_v3_3_nmi(void)
+{
+ return gic_data.has_nmi && system_uses_nmi();
+}
+
+static inline u64 gic_read_nmiar(void)
+{
+ u64 irqstat;
+
+ irqstat = read_sysreg_s(SYS_ICC_NMIAR1_EL1);
+
+ dsb(sy);
+
+ return irqstat;
+}
+
+#else
+static inline bool gic_supports_v3_3_nmi(void)
+{
+ return false;
+}
+
+static inline u64 gic_read_nmiar(void)
+{
+ BUG();
+}
+#endif
+
static enum gic_intid_range __get_intid_range(irq_hw_number_t hwirq)
{
switch (hwirq) {
@@ -438,6 +473,8 @@ static u32 convert_offset_index(struct irq_data *d, u32 offset, u32 *index)
return GICD_ICFGRnE;
case GICD_IROUTER:
return GICD_IROUTERnE;
+ case GICD_INMIR:
+ return GICD_INMIRnE;
default:
break;
}
@@ -467,6 +504,42 @@ static int gic_peek_irq(struct irq_data *d, u32 offset)
return !!(readl_relaxed(base + offset + (index / 32) * 4) & mask);
}
+static void gic_irq_configure_nmi(struct irq_data *d, bool enable)
+{
+ void __iomem *base, *addr;
+ unsigned long val;
+ u32 offset, index;
+
+ offset = convert_offset_index(d, GICD_INMIR, &index);
+
+ if (gic_irq_in_rdist(d))
+ base = gic_data_rdist_sgi_base();
+ else
+ base = gic_dist_base_alias(d);
+
+ addr = base + offset + (index / 32) * 4;
+
+ raw_spin_lock(&gic_nmi_lock);
+
+ val = readl_relaxed(addr);
+
+ __assign_bit(index % 32, &val, enable);
+
+ writel_relaxed(val, addr);
+
+ raw_spin_unlock(&gic_nmi_lock);
+}
+
+static void gic_irq_enable_nmi(struct irq_data *d)
+{
+ gic_irq_configure_nmi(d, true);
+}
+
+static void gic_irq_disable_nmi(struct irq_data *d)
+{
+ gic_irq_configure_nmi(d, false);
+}
+
static void gic_poke_irq(struct irq_data *d, u32 offset)
{
void __iomem *base;
@@ -598,7 +671,7 @@ static int gic_irq_nmi_setup(struct irq_data *d)
{
struct irq_desc *desc = irq_to_desc(d->irq);
- if (!gic_supports_pseudo_nmi())
+ if (!gic_supports_pseudo_nmi() && !gic_supports_v3_3_nmi())
return -EINVAL;
if (gic_peek_irq(d, GICD_ISENABLER)) {
@@ -617,7 +690,10 @@ static int gic_irq_nmi_setup(struct irq_data *d)
if (!gic_irq_in_rdist(d))
desc->handle_irq = handle_fasteoi_nmi;
- gic_irq_set_prio(d, dist_prio_nmi);
+ if (gic_supports_v3_3_nmi())
+ gic_irq_enable_nmi(d);
+ else
+ gic_irq_set_prio(d, dist_prio_nmi);
return 0;
}
@@ -626,7 +702,7 @@ static void gic_irq_nmi_teardown(struct irq_data *d)
{
struct irq_desc *desc = irq_to_desc(d->irq);
- if (WARN_ON(!gic_supports_pseudo_nmi()))
+ if (WARN_ON(!gic_supports_pseudo_nmi() && !gic_supports_v3_3_nmi()))
return;
if (gic_peek_irq(d, GICD_ISENABLER)) {
@@ -645,7 +721,10 @@ static void gic_irq_nmi_teardown(struct irq_data *d)
if (!gic_irq_in_rdist(d))
desc->handle_irq = handle_fasteoi_irq;
- gic_irq_set_prio(d, dist_prio_irq);
+ if (gic_supports_v3_3_nmi())
+ gic_irq_disable_nmi(d);
+ else
+ gic_irq_set_prio(d, dist_prio_irq);
}
static bool gic_arm64_erratum_2941627_needed(struct irq_data *d)
@@ -836,7 +915,8 @@ static void __gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
gic_complete_ack(irqnr);
if (generic_handle_domain_nmi(gic_data.domain, irqnr)) {
- WARN_ONCE(true, "Unexpected pseudo-NMI (irqnr %u)\n", irqnr);
+ WARN_ONCE(true, "Unexpected %sNMI (irqnr %u)\n",
+ gic_supports_pseudo_nmi() ? "pseudo-" : "", irqnr);
gic_deactivate_unhandled(irqnr);
}
}
@@ -911,7 +991,11 @@ static void __gic_handle_irq_from_irqsoff(struct pt_regs *regs)
static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
{
- if (unlikely(gic_supports_pseudo_nmi() && !interrupts_enabled(regs)))
+ if (gic_supports_v3_3_nmi() && in_nmi()) {
+ u32 irqnr = gic_read_nmiar();
+
+ __gic_handle_nmi(irqnr, regs);
+ } else if (unlikely(gic_supports_pseudo_nmi() && !interrupts_enabled(regs)))
__gic_handle_irq_from_irqsoff(regs);
else
__gic_handle_irq_from_irqson(regs);
@@ -1964,6 +2048,19 @@ static void gic_enable_pseudo_nmi(void)
gic_has_relaxed_pmr_sync() ? "relaxed" : "forced");
static_branch_enable(&supports_pseudo_nmi);
+}
+
+static void gic_enable_nmi_support(void)
+{
+ if ((!gic_prio_masking_enabled() || pseudo_nmi_support_forbidden) && !gic_supports_v3_3_nmi())
+ return;
+
+ /*
+ * Initialize pseudo-NMIs only if GIC driver cannot take advantage
+ * of core (FEAT_NMI) and GIC (FEAT_GICv3_NMI) in HW
+ */
+ if (!gic_supports_v3_3_nmi())
+ gic_enable_pseudo_nmi();
if (static_branch_likely(&supports_deactivate_key))
gic_eoimode1_chip.flags |= IRQCHIP_SUPPORTS_NMI;
@@ -2032,6 +2129,9 @@ static int __init gic_init_bases(phys_addr_t dist_phys_base,
irq_domain_update_bus_token(gic_data.domain, DOMAIN_BUS_WIRED);
gic_data.has_rss = !!(typer & GICD_TYPER_RSS);
+ gic_data.has_nmi = !!(typer & GICD_TYPER_NMI);
+
+ pr_info("Non-maskable interrupt property %s supported\n", gic_data.has_nmi ? "is" : "not");
if (typer & GICD_TYPER_MBIS) {
err = mbi_init(handle, gic_data.domain);
@@ -2047,7 +2147,7 @@ static int __init gic_init_bases(phys_addr_t dist_phys_base,
gic_prio_init();
gic_dist_init();
gic_cpu_init();
- gic_enable_pseudo_nmi();
+ gic_enable_nmi_support();
gic_smp_init();
gic_cpu_pm_init();
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index ea5fd2374ebe..ebccd76cadda 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -30,6 +30,7 @@
#define GICD_ICFGR 0x0C00
#define GICD_IGRPMODR 0x0D00
#define GICD_NSACR 0x0E00
+#define GICD_INMIR 0x0F80
#define GICD_IGROUPRnE 0x1000
#define GICD_ISENABLERnE 0x1200
#define GICD_ICENABLERnE 0x1400
@@ -39,6 +40,7 @@
#define GICD_ICACTIVERnE 0x1C00
#define GICD_IPRIORITYRnE 0x2000
#define GICD_ICFGRnE 0x3000
+#define GICD_INMIRnE 0x3B00
#define GICD_IROUTER 0x6000
#define GICD_IROUTERnE 0x8000
#define GICD_IDREGS 0xFFD0
@@ -83,6 +85,7 @@
#define GICD_TYPER_LPIS (1U << 17)
#define GICD_TYPER_MBIS (1U << 16)
#define GICD_TYPER_ESPI (1U << 8)
+#define GICD_TYPER_NMI (1U << 9)
#define GICD_TYPER_ID_BITS(typer) ((((typer) >> 19) & 0x1f) + 1)
#define GICD_TYPER_NUM_LPIS(typer) ((((typer) >> 11) & 0x1f) + 1)
@@ -238,6 +241,7 @@
#define GICR_ICFGR0 GICD_ICFGR
#define GICR_IGRPMODR0 GICD_IGRPMODR
#define GICR_NSACR GICD_NSACR
+#define GICR_INMIR0 GICD_INMIR
#define GICR_TYPER_PLPIS (1U << 0)
#define GICR_TYPER_VLPIS (1U << 1)
--
2.34.1
next prev parent reply other threads:[~2026-09-14 10:24 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-14 10:20 [PATCH 00/38] arm64: Add support for FEAT_NMI Vladimir Murzin
2026-09-14 10:20 ` [PATCH 01/38] arm64: irqflags: Introduce arm64-specific irqflags type Vladimir Murzin
2026-09-14 10:20 ` [PATCH 02/38] arm64: irqflags: save and use both DAIF and PMR Vladimir Murzin
2026-09-14 10:20 ` [PATCH 03/38] arm64: interrupts: Add common exception state helpers Vladimir Murzin
2026-09-17 8:58 ` Jinjie Ruan
2026-09-17 9:10 ` Jinjie Ruan
2026-09-21 14:10 ` Vladimir Murzin
2026-09-21 23:13 ` Ashok Raj
2026-09-14 10:20 ` [PATCH 04/38] arm64: process: Lift check for exception state to generic infrastructure Vladimir Murzin
2026-09-14 10:20 ` [PATCH 05/38] arm64: entry: Introduce entry specific exception masking helpers Vladimir Murzin
2026-09-17 9:53 ` Jinjie Ruan
2026-09-21 14:15 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 06/38] arm64: entry: replace DAIF helpers with entry helpers Vladimir Murzin
[not found] ` <15bc779f-e6f5-4c2a-a629-cb020f12a41a@huawei.com>
2026-09-21 14:01 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 07/38] arm64: interrupts: Introduce exception masking save/restore helpers Vladimir Murzin
2026-09-14 10:20 ` [PATCH 08/38] arm64: interrupts: introduce a helper for GIC priority initialization Vladimir Murzin
2026-09-14 10:20 ` [PATCH 09/38] arm64: replace local_daif helpers Vladimir Murzin
2026-09-17 8:14 ` Jinjie Ruan
2026-09-21 14:07 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 10/38] arm64: cpuidle: use new helpers to bypass interrupt priority masking Vladimir Murzin
2026-09-14 10:20 ` [PATCH 11/38] arm64: remove daifflags.h Vladimir Murzin
2026-09-14 10:20 ` [PATCH 12/38] arm64: gicv3: remove GIC_PRIO_PSR_I_SET Vladimir Murzin
2026-09-14 10:20 ` [PATCH 13/38] arm64: cpufeature: Remove system_has_prio_mask_debugging() Vladimir Murzin
2026-09-14 10:20 ` [PATCH 14/38] arm64: irqflags: Switch to CONFIG_DEBUG_IRQFLAGS Vladimir Murzin
2026-09-14 10:20 ` [PATCH 15/38] arm64: Kconfig: Remove CONFIG_ARM64_DEBUG_PRIORITY_MASKING Vladimir Murzin
2026-09-14 10:20 ` [PATCH 16/38] efi/runtime-wrappers: Permit architectures to override IRQ flags checks Vladimir Murzin
2026-09-14 10:20 ` [PATCH 17/38] arm64/efi: Implement override for " Vladimir Murzin
2026-09-14 10:20 ` [PATCH 18/38] arm64: booting: Document boot requirements for FEAT_NMI Vladimir Murzin
2026-09-14 10:20 ` [PATCH 19/38] arm64: sysreg: Add definitions for immediate versions of MSR ALLINT Vladimir Murzin
2026-09-14 10:20 ` [PATCH 20/38] arm64: probes: Reject stepping over ALLINT Vladimir Murzin
2026-09-16 8:53 ` Jinjie Ruan
2026-09-14 10:20 ` [PATCH 21/38] arm64: ptrace: Add PSR_ALLINT_BIT Vladimir Murzin
2026-09-14 10:20 ` [PATCH 22/38] arm64: idreg: Add an override for FEAT_NMI Vladimir Murzin
2026-09-14 10:20 ` [PATCH 23/38] arm64: cpufeature: Detect PE support " Vladimir Murzin
2026-09-16 9:22 ` Jinjie Ruan
2026-09-21 13:53 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 24/38] arm64: nmi: Manage masking for superpriority interrupts Vladimir Murzin
2026-09-17 11:41 ` Jinjie Ruan
2026-09-21 14:23 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 25/38] arm64: irq: Report FEAT_NMI masking local IRQs Vladimir Murzin
2026-09-14 10:20 ` [PATCH 26/38] arm64: nmi: Add handling of superpriority interrupts as NMIs Vladimir Murzin
2026-09-17 11:37 ` Jinjie Ruan
2026-09-21 14:16 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 27/38] arm64: suspend: Always initialise PSTATE.ALLINT Vladimir Murzin
2026-09-14 10:20 ` [PATCH 28/38] arm64/efi: Add ALLINT to IRQ flags checks Vladimir Murzin
2026-09-14 10:20 ` [PATCH 29/38] arm64: kprobes: Disable NMIs Vladimir Murzin
2026-09-14 10:20 ` [PATCH 30/38] arm64: smp: Abstract SGI and LPI operations Vladimir Murzin
2026-09-16 9:01 ` Jinjie Ruan
2026-09-21 13:44 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 31/38] arm64: smp: Fall back to IRQ when IPI NMI request fails Vladimir Murzin
2026-09-14 10:20 ` [PATCH 32/38] arm64: nmi: Add Kconfig for NMI Vladimir Murzin
2026-09-16 9:06 ` Jinjie Ruan
2026-09-21 13:47 ` Vladimir Murzin
2026-09-14 10:20 ` [PATCH 33/38] irqchip/gic-v3: Rename nmi to pseudo_nmi Vladimir Murzin
2026-09-14 10:20 ` Vladimir Murzin [this message]
2026-09-14 10:20 ` [PATCH 35/38] arm64: smp: Add NMI support for LPI-backed IPIs Vladimir Murzin
2026-09-14 10:21 ` [PATCH 36/38] genirq: Trust local irqchip when considering IRQ for NMI Vladimir Murzin
2026-09-17 12:06 ` Jinjie Ruan
2026-09-14 10:21 ` [PATCH 37/38] genirq: Do not call add_interrupt_randomness() in NMI context Vladimir Murzin
2026-09-17 11:55 ` Jinjie Ruan
2026-09-14 10:21 ` [PATCH 38/38] irqchip/gic-v5: Add NMI support Vladimir Murzin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260914102102.68597-35-vladimir.murzin@arm.com \
--to=vladimir.murzin@arm.com \
--cc=catalin.marinas@arm.com \
--cc=liaochang1@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=ruanjinjie@huawei.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox