[PATCH v2 20/20] media: imx355: Remove storing cur_mode in the state

[Dave Stevenson <dave.stevenson@raspberrypi.com>]

All the information for the mode is now stored within
the subdev state, so configure the sensor based on that.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/imx355.c | 65 ++++++++++++++++++++++------------------------
 1 file changed, 31 insertions(+), 34 deletions(-)

diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
index bb620ebb074f..f31833e5d1d1 100644
--- a/drivers/media/i2c/imx355.c
+++ b/drivers/media/i2c/imx355.c
@@ -173,9 +173,6 @@ struct imx355 {
 	struct v4l2_ctrl *vflip;
 	struct v4l2_ctrl *hflip;
 
-	/* Current mode */
-	const struct imx355_mode *cur_mode;
-
 	struct imx355_hwcfg *hwcfg;
 	const struct imx355_clk_params *clk_params;
 
@@ -594,6 +591,8 @@ static int imx355_set_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct imx355 *imx355 = container_of(ctrl->handler,
 					     struct imx355, ctrl_handler);
+	const struct v4l2_mbus_framefmt *format = NULL;
+	struct v4l2_subdev_state *state;
 	s64 max;
 	int ret;
 
@@ -604,7 +603,7 @@ static int imx355_set_ctrl(struct v4l2_ctrl *ctrl)
 	switch (ctrl->id) {
 	case V4L2_CID_VBLANK:
 		/* Update max exposure while meeting expected vblanking */
-		max = imx355->cur_mode->height + ctrl->val - IMX355_EXPOSURE_OFFSET;
+		max = format->height + ctrl->val - IMX355_EXPOSURE_OFFSET;
 		__v4l2_ctrl_modify_range(imx355->exposure,
 					 imx355->exposure->minimum,
 					 max, imx355->exposure->step, max);
@@ -635,7 +634,7 @@ static int imx355_set_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_VBLANK:
 		/* Update FLL that meets expected vertical blanking */
 		ret = cci_write(imx355->regmap, IMX355_REG_FLL,
-				imx355->cur_mode->height + ctrl->val, NULL);
+				format->height + ctrl->val, NULL);
 		break;
 	case V4L2_CID_TEST_PATTERN:
 		ret = cci_write(imx355->regmap, IMX355_REG_TEST_PATTERN,
@@ -721,9 +720,7 @@ imx355_set_pad_format(struct v4l2_subdev *sd,
 	const struct imx355_mode *mode;
 	struct v4l2_mbus_framefmt *framefmt;
 	struct v4l2_rect *crop;
-	s32 vblank_def;
 	s64 h_blank;
-	u32 height;
 
 	/*
 	 * Only one bayer order is supported.
@@ -748,16 +745,14 @@ imx355_set_pad_format(struct v4l2_subdev *sd,
 	crop->top = mode->crop.top;
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		imx355->cur_mode = mode;
 		/* Update limits and set FPS to default */
-		height = imx355->cur_mode->height;
-		vblank_def = imx355->cur_mode->fll_def - height;
-		height = IMX355_FLL_MAX - height;
 		__v4l2_ctrl_modify_range(imx355->vblank, IMX355_VBLANK_MIN,
-					 height, 1, vblank_def);
-		__v4l2_ctrl_s_ctrl(imx355->vblank, vblank_def);
+					 IMX355_FLL_MAX - mode->height, 1,
+					 mode->fll_def - mode->height);
+		__v4l2_ctrl_s_ctrl(imx355->vblank, mode->fll_def - mode->height);
+
+		h_blank = mode->llp - mode->width;
 
-		h_blank = mode->llp - imx355->cur_mode->width;
 		/*
 		 * Currently hblank is not changeable.
 		 * So FPS control is done only by vblank.
@@ -809,9 +804,11 @@ static int imx355_entity_init_state(struct v4l2_subdev *subdev,
 /* Start streaming */
 static int imx355_start_streaming(struct imx355 *imx355)
 {
-	const struct imx355_reg_list *reg_list;
+	const struct v4l2_mbus_framefmt *fmt;
+	struct v4l2_subdev_state *state;
 	const struct imx355_mode *mode;
 	int lane_idx = imx355->hwcfg->num_lanes == 4 ? 0 : 1;
+	struct v4l2_rect *crop;
 	u64 link_bitrate;
 	u8 binning_mode;
 	int ret = 0;
@@ -820,25 +817,29 @@ static int imx355_start_streaming(struct imx355 *imx355)
 	cci_multi_reg_write(imx355->regmap, imx355_global_regs,
 			    ARRAY_SIZE(imx355_global_regs), &ret);
 
-	/* Apply default values of current mode */
-	mode = imx355->cur_mode;
-	reg_list = &mode->reg_list;
-	cci_multi_reg_write(imx355->regmap, reg_list->regs,
-			    reg_list->num_of_regs, &ret);
+	/* Apply values of current mode */
+	state = v4l2_subdev_get_locked_active_state(&imx355->sd);
+	fmt = v4l2_subdev_state_get_format(state, 0);
+	crop = v4l2_subdev_state_get_crop(state, 0);
+	mode = v4l2_find_nearest_size(supported_modes,
+				      ARRAY_SIZE(supported_modes),
+				      width, height, fmt->width, fmt->height);
+	cci_multi_reg_write(imx355->regmap, mode->reg_list.regs,
+			    mode->reg_list.num_of_regs, &ret);
 
 	/* Set readout crop and size registers  */
-	cci_write(imx355->regmap, IMX355_REG_X_ADD_START, mode->crop.left,
+	cci_write(imx355->regmap, IMX355_REG_X_ADD_START, crop->left,
 		  &ret);
-	cci_write(imx355->regmap, IMX355_REG_Y_ADD_START, mode->crop.top, &ret);
+	cci_write(imx355->regmap, IMX355_REG_Y_ADD_START, crop->top, &ret);
 	cci_write(imx355->regmap, IMX355_REG_X_ADD_END,
-		  mode->crop.width + mode->crop.left - 1, &ret);
+		  crop->width + crop->left - 1, &ret);
 	cci_write(imx355->regmap, IMX355_REG_Y_ADD_END,
-		  mode->crop.height + mode->crop.top - 1, &ret);
-	cci_write(imx355->regmap, IMX355_REG_X_OUT_SIZE, mode->width, &ret);
-	cci_write(imx355->regmap, IMX355_REG_Y_OUT_SIZE, mode->height, &ret);
+		  crop->height + crop->top - 1, &ret);
+	cci_write(imx355->regmap, IMX355_REG_X_OUT_SIZE, fmt->width, &ret);
+	cci_write(imx355->regmap, IMX355_REG_Y_OUT_SIZE, fmt->height, &ret);
 
-	binning_mode = ((mode->crop.width / mode->width) << 4) |
-			(mode->crop.height / mode->height);
+	binning_mode = ((crop->width / fmt->width) << 4) |
+			(crop->height / fmt->height);
 	cci_write(imx355->regmap, IMX355_REG_BINNING_MODE,
 		  binning_mode == 0x11 ? 0x00 : 0x01, &ret);
 	cci_write(imx355->regmap, IMX355_REG_BINNING_TYPE, binning_mode, &ret);
@@ -869,7 +870,7 @@ static int imx355_start_streaming(struct imx355 *imx355)
 
 	/* set line length */
 	cci_write(imx355->regmap, IMX355_REG_LLP,
-		  imx355->hblank->val + imx355->cur_mode->width, &ret);
+		  imx355->hblank->val + fmt->width, &ret);
 
 	/* Apply customized values from user */
 	if (!ret)
@@ -1022,11 +1023,11 @@ static int imx355_init_controls(struct imx355 *imx355)
 {
 	struct v4l2_fwnode_device_properties props;
 	struct v4l2_ctrl_handler *ctrl_hdlr;
+	const struct imx355_mode *mode = &supported_modes[0];
 	s64 exposure_max;
 	s64 vblank_def;
 	s64 hblank;
 	u64 pixel_rate;
-	const struct imx355_mode *mode;
 	int ret;
 
 	ctrl_hdlr = &imx355->ctrl_handler;
@@ -1048,7 +1049,6 @@ static int imx355_init_controls(struct imx355 *imx355)
 			  pixel_rate, pixel_rate, 1, pixel_rate);
 
 	/* Initialize vblank/hblank/exposure parameters based on current mode */
-	mode = imx355->cur_mode;
 	vblank_def = mode->fll_def - mode->height;
 	imx355->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx355_ctrl_ops,
 					   V4L2_CID_VBLANK, IMX355_VBLANK_MIN,
@@ -1242,9 +1242,6 @@ static int imx355_probe(struct i2c_client *client)
 		goto error_power_off;
 	}
 
-	/* Set default mode to max resolution */
-	imx355->cur_mode = &supported_modes[0];
-
 	ret = imx355_init_controls(imx355);
 	if (ret) {
 		dev_err(imx355->dev, "failed to init controls: %d", ret);

-- 
2.34.1