From: sashiko-bot@kernel.org
To: "Dave Stevenson" <dave.stevenson@raspberrypi.com>
Cc: conor+dt@kernel.org, robh@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 03/20] media: imx355: Remove duplicated registers from the mode tables
Date: Tue, 07 Jul 2026 17:14:40 +0000 [thread overview]
Message-ID: <20260707171440.5472B1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260707-media-imx355-v2-3-1683ec07b897@raspberrypi.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Register 0x030b (value 0x01) was accidentally omitted when common registers were moved into the global register array, causing it to be dropped entirely from the initialization sequence.
--
--- Patch [3]: [PATCH v2 03/20] media: imx355: Remove duplicated registers from the mode tables ---
commit 5dff7585c6b01310348ab92104e830ef77f11da0
Author: Dave Stevenson <dave.stevenson@raspberrypi.com>
media: imx355: Remove duplicated registers from the mode tables
A large number of registers are identical within all the modes.
This patch moves those duplicated registers to imx355_global_regs to
reduce duplication.
> diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
> index ad9a9464175b1..83a59aa8b0985 100644
> --- a/drivers/media/i2c/imx355.c
> +++ b/drivers/media/i2c/imx355.c
> @@ -221,6 +221,28 @@ static const struct imx355_reg imx355_global_regs[] = {
> { 0x68b0, 0x00 },
> { 0x3058, 0x00 },
> { 0x305a, 0x00 },
> + { 0x0112, 0x0a },
> + { 0x0113, 0x0a },
> + { 0x0114, 0x03 },
> + { 0x0301, 0x05 },
> + { 0x0303, 0x01 },
> + { 0x0305, 0x02 },
> + { 0x0306, 0x00 },
> + { 0x0307, 0x78 },
> + { 0x030d, 0x02 },
[Severity: High]
Was register 0x030b unintentionally omitted from this list?
The original mode tables contained { 0x030b, 0x01 } between 0x0307 and 0x030d,
but it appears missing in the new global register array.
Omitting this PLL configuration register initialization could leave the clock
divider in an undefined state. Does this misconfigure the pixel clock when
imx355_global_regs is applied during sensor start-up?
> + { 0x0310, 0x00 },
> + { 0x0220, 0x00 },
> + { 0x0222, 0x01 },
[ ... ]
> @@ -253,32 +270,11 @@ static const struct imx355_reg mode_3268x2448_regs[] = {
> { 0x034d, 0xc4 },
> { 0x034e, 0x09 },
> { 0x034f, 0x90 },
> - { 0x0301, 0x05 },
> - { 0x0303, 0x01 },
> - { 0x0305, 0x02 },
> - { 0x0306, 0x00 },
> - { 0x0307, 0x78 },
> - { 0x030b, 0x01 },
> - { 0x030d, 0x02 },
> - { 0x0310, 0x00 },
> { 0x0700, 0x00 },
> { 0x0701, 0x10 },
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260707-media-imx355-v2-0-1683ec07b897@raspberrypi.com?part=3
next prev parent reply other threads:[~2026-07-07 17:14 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 17:04 [PATCH v2 00/20] media/imx355: General code cleanups, and adding support for 2 lane operation Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 01/20] media: i2c: imx355: Add support for 24 MHz external clock Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 02/20] dt-bindings: media: imx355: Allow 2 CSI2 data lane output Dave Stevenson
2026-07-08 7:07 ` Krzysztof Kozlowski
2026-07-07 17:04 ` [PATCH v2 03/20] media: imx355: Remove duplicated registers from the mode tables Dave Stevenson
2026-07-07 17:14 ` sashiko-bot [this message]
2026-07-07 17:04 ` [PATCH v2 04/20] media: imx355: Remove setting FRM_LENGTH_LINES in the mode regs Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 05/20] media: imx355: Programmatically set the crop parameters for each mode Dave Stevenson
2026-07-07 17:18 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 06/20] media: imx355: Set register LINE_LENGTH_PCK programmatically Dave Stevenson
2026-07-07 17:12 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 07/20] media: imx355: Set binning mode registers programmatically Dave Stevenson
2026-07-07 17:15 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 08/20] media: imx355: Remove link_freq_index from each mode as ununsed Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 09/20] media: imx355: pixel_rate never changes, so don't recompute Dave Stevenson
2026-07-07 17:15 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 10/20] media: imx355: Remove redundant fll_min, and implement fixed offset Dave Stevenson
2026-07-07 17:18 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 11/20] media: imx355: Add support for get_selection Dave Stevenson
2026-07-07 17:18 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 12/20] media: imx355: Use pm_runtime autosuspend_delay Dave Stevenson
2026-07-07 17:21 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 13/20] media: imx355: Convert to new CCI register access helpers Dave Stevenson
2026-07-07 17:21 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 14/20] media: imx355: Set the colorspace in the format Dave Stevenson
2026-07-07 17:16 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 15/20] media: imx355: Define the exposure offset, and use that define Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 16/20] media: imx355: Use NULL ctrl_ops for HBLANK as it is a read-only control Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 17/20] media: imx355: Compute link frequency from PLL setup Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 18/20] media: imx355: Support 2 lane readout Dave Stevenson
2026-07-07 17:04 ` [PATCH v2 19/20] media: imx355: Switch to using the subdev state Dave Stevenson
2026-07-07 19:34 ` sashiko-bot
2026-07-07 17:04 ` [PATCH v2 20/20] media: imx355: Remove storing cur_mode in the state Dave Stevenson
2026-07-07 17:37 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707171440.5472B1F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox