From: Terry Bowman <terry.bowman@amd.com>
To: <dave@stgolabs.net>, <jonathan.cameron@huawei.com>,
<dave.jiang@intel.com>, <alison.schofield@intel.com>,
<dan.j.williams@intel.com>, <bhelgaas@google.com>,
<shiju.jose@huawei.com>, <ming.li@zohomail.com>,
<Smita.KoralahalliChannabasappa@amd.com>, <rrichter@amd.com>,
<dan.carpenter@linaro.org>, <PradeepVineshReddy.Kodamati@amd.com>,
<lukas@wunner.de>, <Benjamin.Cheatham@amd.com>,
<sathyanarayanan.kuppuswamy@linux.intel.com>,
<linux-cxl@vger.kernel.org>, <alucerop@amd.com>,
<ira.weiny@intel.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<terry.bowman@amd.com>
Subject: [RESEND v13 24/25] CXL/PCI: Enable CXL protocol errors during CXL Port probe
Date: Tue, 4 Nov 2025 11:03:04 -0600 [thread overview]
Message-ID: <20251104170305.4163840-25-terry.bowman@amd.com> (raw)
In-Reply-To: <20251104170305.4163840-1-terry.bowman@amd.com>
CXL protocol errors are not enabled for all CXL devices after boot. These
must be enabled inorder to process CXL protocol errors.
Introduce cxl_unmask_proto_interrupts() to call pci_aer_unmask_internal_errors().
pci_aer_unmask_internal_errors() expects the pdev->aer_cap is initialized.
But, dev->aer_cap is not initialized for CXL Upstream Switch Ports and CXL
Downstream Switch Ports. Initialize the dev->aer_cap if necessary. Enable AER
correctable internal errors and uncorrectable internal errors for all CXL
devices.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
---
Changes in v12->v13:
- Add dev and dev_is_pci() NULL checks in cxl_unmask_proto_interrupts() (Terry)
- Add Dave Jiang's and Ben's review-by
Changes in v11->v12:
- None
Changes in v10->v11:
- Added check for valid PCI devices in is_cxl_error() (Terry)
- Removed check for RCiEP in cxl_handle_proto_err() and
cxl_report_error_detected() (Terry)
---
drivers/cxl/core/core.h | 4 ++++
drivers/cxl/core/port.c | 4 ++++
drivers/cxl/core/ras.c | 26 +++++++++++++++++++++++++-
3 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index 046ec65ed147..a7a0838c8f23 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -159,6 +159,8 @@ pci_ers_result_t pci_error_detected(struct pci_dev *pdev,
void pci_cor_error_detected(struct pci_dev *pdev);
pci_ers_result_t cxl_port_error_detected(struct device *dev);
void cxl_port_cor_error_detected(struct device *dev);
+void cxl_mask_proto_interrupts(struct device *dev);
+void cxl_unmask_proto_interrupts(struct device *dev);
#else
static inline int cxl_ras_init(void)
{
@@ -183,6 +185,8 @@ static inline pci_ers_result_t cxl_port_error_detected(struct device *dev)
{
return PCI_ERS_RESULT_NONE;
}
+static inline void cxl_unmask_proto_interrupts(struct device *dev) { }
+static inline void cxl_mask_proto_interrupts(struct device *dev) { }
#endif /* CONFIG_CXL_RAS */
/* Restricted CXL Host specific RAS functions */
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index d060f864cf2e..a23c742eb670 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -1747,6 +1747,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,
rc = -ENXIO;
}
+ cxl_unmask_proto_interrupts(cxlmd->cxlds->dev);
+
return rc;
}
@@ -1833,6 +1835,8 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)
rc = cxl_add_ep(dport, &cxlmd->dev);
+ cxl_unmask_proto_interrupts(cxlmd->cxlds->dev);
+
/*
* If the endpoint already exists in the port's list,
* that's ok, it was added on a previous pass.
diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
index 52c6f19564b6..101e55723785 100644
--- a/drivers/cxl/core/ras.c
+++ b/drivers/cxl/core/ras.c
@@ -122,6 +122,23 @@ static bool is_pcie_endpoint(struct pci_dev *pdev)
return pci_pcie_type(pdev) == PCI_EXP_TYPE_ENDPOINT;
}
+void cxl_unmask_proto_interrupts(struct device *dev)
+{
+ if (!dev || !dev_is_pci(dev))
+ return;
+
+ struct pci_dev *pdev __free(pci_dev_put) = pci_dev_get(to_pci_dev(dev));
+
+ if (!pdev->aer_cap) {
+ pdev->aer_cap = pci_find_ext_capability(pdev,
+ PCI_EXT_CAP_ID_ERR);
+ if (!pdev->aer_cap)
+ return;
+ }
+
+ pci_aer_unmask_internal_errors(pdev);
+}
+
static void cxl_dport_map_ras(struct cxl_dport *dport)
{
struct cxl_register_map *map = &dport->reg_map;
@@ -230,7 +247,10 @@ void cxl_dport_init_ras_reporting(struct cxl_dport *dport, struct device *host)
cxl_dport_map_rch_aer(dport);
cxl_disable_rch_root_ints(dport);
+ return;
}
+
+ cxl_unmask_proto_interrupts(dport->dport_dev);
}
EXPORT_SYMBOL_NS_GPL(cxl_dport_init_ras_reporting, "CXL");
@@ -241,8 +261,12 @@ void cxl_uport_init_ras_reporting(struct cxl_port *port,
map->host = host;
if (cxl_map_component_regs(map, &port->uport_regs,
- BIT(CXL_CM_CAP_CAP_ID_RAS)))
+ BIT(CXL_CM_CAP_CAP_ID_RAS))) {
dev_dbg(&port->dev, "Failed to map RAS capability\n");
+ return;
+ }
+
+ cxl_unmask_proto_interrupts(port->uport_dev);
}
EXPORT_SYMBOL_NS_GPL(cxl_uport_init_ras_reporting, "CXL");
--
2.34.1
next prev parent reply other threads:[~2025-11-04 17:07 UTC|newest]
Thread overview: 103+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-04 17:02 [RESEND v13 00/25] Enable CXL PCIe Port Protocol Error handling and logging Terry Bowman
2025-11-04 17:02 ` [RESEND v13 01/25] CXL/PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h Terry Bowman
2025-11-04 17:50 ` Jonathan Cameron
2025-11-19 3:19 ` dan.j.williams
2025-12-08 18:04 ` Bjorn Helgaas
2025-12-08 22:13 ` Bowman, Terry
2025-11-04 17:02 ` [RESEND v13 02/25] PCI/CXL: Introduce pcie_is_cxl() Terry Bowman
2025-11-04 17:52 ` Jonathan Cameron
2025-11-19 3:19 ` dan.j.williams
2025-11-19 15:55 ` Bowman, Terry
2025-11-19 23:34 ` dan.j.williams
2025-11-21 20:31 ` Gregory Price
2025-11-04 17:02 ` [RESEND v13 03/25] cxl/pci: Remove unnecessary CXL Endpoint handling helper functions Terry Bowman
2025-11-04 17:53 ` Jonathan Cameron
2025-11-19 3:20 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 04/25] cxl/pci: Remove unnecessary CXL RCH " Terry Bowman
2025-11-19 3:20 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 05/25] cxl: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks from core/pci.c Terry Bowman
2025-11-19 3:20 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 06/25] cxl: Move CXL driver's RCH error handling into core/ras_rch.c Terry Bowman
2025-11-04 18:03 ` Jonathan Cameron
2025-11-19 3:20 ` dan.j.williams
2025-11-19 16:07 ` Bowman, Terry
2025-11-04 17:02 ` [RESEND v13 07/25] CXL/AER: Replace device_lock() in cxl_rch_handle_error_iter() with guard() lock Terry Bowman
2025-11-04 18:05 ` Jonathan Cameron
2025-11-04 19:53 ` Dave Jiang
2025-11-19 3:20 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 08/25] CXL/AER: Move AER drivers RCH error handling into pcie/aer_cxl_rch.c Terry Bowman
2025-11-19 3:20 ` dan.j.williams
2025-11-19 8:26 ` Lukas Wunner
2025-11-19 23:36 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 09/25] PCI/AER: Report CXL or PCIe bus error type in trace logging Terry Bowman
2025-11-04 18:08 ` Jonathan Cameron
2025-11-04 18:26 ` Bjorn Helgaas
2025-11-04 17:02 ` [RESEND v13 10/25] cxl/pci: Update RAS handler interfaces to also support CXL Ports Terry Bowman
2025-11-04 18:10 ` Jonathan Cameron
2025-11-11 8:17 ` Alison Schofield
2025-11-19 3:19 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 11/25] cxl/pci: Log message if RAS registers are unmapped Terry Bowman
2025-11-19 3:27 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 12/25] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports Terry Bowman
2025-11-19 21:23 ` dan.j.williams
2025-11-19 22:02 ` Bowman, Terry
2025-11-19 23:40 ` dan.j.williams
2025-11-21 14:56 ` Bowman, Terry
2025-11-04 17:02 ` [RESEND v13 13/25] cxl/pci: Update cxl_handle_cor_ras() to return early if no RAS errors Terry Bowman
2025-11-05 8:30 ` Alejandro Lucero Palau
2025-11-19 22:00 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 14/25] cxl/pci: Map CXL Endpoint Port and CXL Switch Port RAS registers Terry Bowman
2025-11-04 18:15 ` Jonathan Cameron
2025-11-04 20:03 ` Dave Jiang
2025-11-11 8:23 ` Alison Schofield
2025-11-04 17:02 ` [RESEND v13 15/25] CXL/PCI: Introduce PCI_ERS_RESULT_PANIC Terry Bowman
2025-11-04 19:03 ` Bjorn Helgaas
2025-11-20 0:17 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 16/25] CXL/AER: Introduce pcie/aer_cxl_vh.c in AER driver for forwarding CXL errors Terry Bowman
2025-11-20 0:44 ` dan.j.williams
2025-11-20 0:53 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 17/25] cxl: Introduce cxl_pci_drv_bound() to check for bound driver Terry Bowman
2025-11-05 17:51 ` Gregory Price
2025-11-05 19:03 ` Gregory Price
2025-11-05 22:26 ` Gregory Price
2025-11-06 17:11 ` Gregory Price
2025-11-06 23:32 ` Bowman, Terry
2025-11-11 8:33 ` Alison Schofield
2025-11-13 21:42 ` Alison Schofield
2025-11-13 22:39 ` Bowman, Terry
2025-11-20 1:24 ` dan.j.williams
2025-11-04 17:02 ` [RESEND v13 18/25] cxl: Change CXL handlers to use guard() instead of scoped_guard() Terry Bowman
2025-11-04 18:18 ` Jonathan Cameron
2025-11-04 20:15 ` Dave Jiang
2025-11-04 17:02 ` [RESEND v13 19/25] cxl/pci: Introduce CXL protocol error handlers for Endpoints Terry Bowman
2025-11-04 18:29 ` Jonathan Cameron
2025-11-04 19:09 ` Bjorn Helgaas
2025-11-04 17:03 ` [RESEND v13 20/25] CXL/PCI: Introduce CXL Port protocol error handlers Terry Bowman
2025-11-04 18:32 ` Jonathan Cameron
2025-11-04 21:20 ` Dave Jiang
2025-11-04 21:27 ` Bowman, Terry
2025-11-04 23:39 ` Dave Jiang
2025-11-04 17:03 ` [RESEND v13 21/25] PCI/AER: Dequeue forwarded CXL error Terry Bowman
2025-11-04 18:40 ` Jonathan Cameron
2025-11-04 18:45 ` Bjorn Helgaas
2025-11-20 3:33 ` dan.j.williams
2025-11-04 17:03 ` [RESEND v13 22/25] CXL/PCI: Export and rename merge_result() to pci_ers_merge_result() Terry Bowman
2025-11-04 18:41 ` Jonathan Cameron
2025-11-04 19:03 ` Bjorn Helgaas
2025-11-14 15:20 ` Bowman, Terry
2025-11-14 16:09 ` Jonathan Cameron
2025-11-04 17:03 ` [RESEND v13 23/25] CXL/PCI: Introduce CXL uncorrectable protocol error recovery Terry Bowman
2025-11-04 18:47 ` Jonathan Cameron
2025-11-04 23:43 ` Dave Jiang
2025-11-05 14:59 ` Bowman, Terry
2025-11-05 16:10 ` Dave Jiang
2025-11-11 8:37 ` Alison Schofield
2025-12-08 18:40 ` Bjorn Helgaas
2025-11-04 17:03 ` Terry Bowman [this message]
2025-11-04 17:03 ` [RESEND v13 25/25] CXL/PCI: Disable CXL protocol error interrupts during CXL Port cleanup Terry Bowman
2025-11-20 3:10 ` dan.j.williams
2025-11-04 19:11 ` [RESEND v13 00/25] Enable CXL PCIe Port Protocol Error handling and logging Bjorn Helgaas
2025-11-04 21:54 ` Bowman, Terry
2025-11-04 22:12 ` Bjorn Helgaas
2025-12-04 17:30 ` Bowman, Terry
2025-12-08 18:42 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251104170305.4163840-25-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=bhelgaas@google.com \
--cc=dan.carpenter@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=ming.li@zohomail.com \
--cc=rrichter@amd.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=shiju.jose@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox