Re: [RESEND v13 08/25] CXL/AER: Move AER drivers RCH error handling into pcie/aer_cxl_rch.c

[<dan.j.williams@intel.com>]

Lukas Wunner wrote:
> On Tue, Nov 18, 2025 at 07:20:22PM -0800, dan.j.williams@intel.com wrote:
> > > +++ b/drivers/pci/pcie/aer.c
> > > @@ -1130,7 +1130,7 @@ static bool find_source_device(struct pci_dev *parent,
> > >   * Note: AER must be enabled and supported by the device which must be
> > >   * checked in advance, e.g. with pcie_aer_is_native().
> > >   */
> > > -static void pci_aer_unmask_internal_errors(struct pci_dev *dev)
> > > +void pci_aer_unmask_internal_errors(struct pci_dev *dev)
> > >  {
> > >  	int aer = dev->aer_cap;
> > >  	u32 mask;
> > > @@ -1143,116 +1143,25 @@ static void pci_aer_unmask_internal_errors(struct pci_dev *dev)
> > >  	mask &= ~PCI_ERR_COR_INTERNAL;
> > >  	pci_write_config_dword(dev, aer + PCI_ERR_COR_MASK, mask);
> > >  }
> > > +EXPORT_SYMBOL_GPL(pci_aer_unmask_internal_errors);
> > 
> > I can not imagine any other driver but the CXL core consuming this
> > symbol, so how about:
> > 
> > EXPORT_SYMBOL_FOR_MODULES(pci_aer_unmask_internal_errors, "cxl_core")
> 
> The "xe" driver needs to unmask Uncorrectable Internal Errors
> (the default is "masked" per PCIe r7.0 sec 7.8.4.3) and could
> take advantage of this helper, so I've asked Terry to keep it
> available for anyone to use:
> 
> https://lore.kernel.org/all/aK66OcdL4Meb0wFt@wunner.de/

Ok. I would not say no to capture that future use case detail in the
changelog.