From: Carlos Maiolino <cem@kernel.org>
To: Eric Sandeen <sandeen@redhat.com>
Cc: linux-xfs@vger.kernel.org, djwong@kernel.org
Subject: Re: [PATCH 2/3] xfs: factor out xrep_reset_fork_to_extents helper for scrub/repair
Date: Mon, 5 Oct 2026 15:07:24 +0200 [thread overview]
Message-ID: <asOXG8ePgukShDRq@nidhogg.toxiclabs.cc> (raw)
In-Reply-To: <20261002211038.2139655-3-sandeen@redhat.com>
On Fri, Oct 02, 2026 at 04:08:10PM -0500, Eric Sandeen wrote:
> The open-coded 8-line series of steps to reset a fork to empty extents
> format is repeated 3 times; factor this out into a helper to eliminate
> cut and paste.
>
> +/* Discard the contents of this fork and initialize as empty extent-format. */
> +void
> +xrep_reset_fork_to_extents(
> + struct xfs_scrub *sc,
> + int whichfork)
> +{
> + struct xfs_ifork *ifp = xfs_ifork_ptr(sc->ip, whichfork);
> +
> + xfs_idestroy_fork(ifp);
> + ifp->if_format = XFS_DINODE_FMT_EXTENTS;
> + ifp->if_nextents = 0;
> + ifp->if_bytes = 0;
> + ifp->if_data = NULL;
> + ifp->if_height = 0;
> +}
Why not also move xfs_trans_log_inode() here?
Sure it will need to use a different flag depending on the fork type,
but then the whole reset and log will be contained within there.
> +
> /*
> * Initialize all the btree cursors for an AG repair except for the btree that
> * we're rebuilding.
> diff --git a/fs/xfs/scrub/repair.h b/fs/xfs/scrub/repair.h
> index 2bb125c4f9bf..c1ba462e4426 100644
> --- a/fs/xfs/scrub/repair.h
> +++ b/fs/xfs/scrub/repair.h
> @@ -81,6 +81,7 @@ int xrep_setup_xfbtree(struct xfs_scrub *sc, const char *descr);
> int xrep_ino_ensure_extent_count(struct xfs_scrub *sc, int whichfork,
> xfs_extnum_t nextents);
> int xrep_reset_perag_resv(struct xfs_scrub *sc);
> +void xrep_reset_fork_to_extents(struct xfs_scrub *sc, int whichfork);
> int xrep_bmap(struct xfs_scrub *sc, int whichfork, bool allow_unwritten);
> int xrep_metadata_inode_forks(struct xfs_scrub *sc);
> int xrep_setup_ag_rmapbt(struct xfs_scrub *sc);
> diff --git a/fs/xfs/scrub/symlink_repair.c b/fs/xfs/scrub/symlink_repair.c
> index 181961364233..5f5bc5211600 100644
> --- a/fs/xfs/scrub/symlink_repair.c
> +++ b/fs/xfs/scrub/symlink_repair.c
> @@ -304,16 +304,7 @@ xrep_symlink_swap_prep(
> * exchange.
> */
> if (ip_local) {
> - struct xfs_ifork *ifp;
> -
> - ifp = xfs_ifork_ptr(sc->ip, XFS_DATA_FORK);
> - xfs_idestroy_fork(ifp);
> - ifp->if_format = XFS_DINODE_FMT_EXTENTS;
> - ifp->if_nextents = 0;
> - ifp->if_bytes = 0;
> - ifp->if_data = NULL;
> - ifp->if_height = 0;
> -
> + xrep_reset_fork_to_extents(sc, XFS_DATA_FORK);
> xfs_trans_log_inode(sc->tp, sc->ip,
> XFS_ILOG_CORE | XFS_ILOG_DDATA);
> }
> --
> 2.55.0
>
>
next prev parent reply other threads:[~2026-10-05 13:07 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 21:08 [PATCH 0/3] xfs: more misc code deduplication Eric Sandeen
2026-10-02 21:08 ` [PATCH 1/3] xfs: factor out xfs_dir2_sf_copy_entries helper Eric Sandeen
2026-10-05 12:14 ` Carlos Maiolino
2026-10-07 13:50 ` Christoph Hellwig
2026-10-02 21:08 ` [PATCH 2/3] xfs: factor out xrep_reset_fork_to_extents helper for scrub/repair Eric Sandeen
2026-10-05 13:07 ` Carlos Maiolino [this message]
2026-10-05 14:12 ` Eric Sandeen
2026-10-05 19:11 ` [PATCH V2 " Eric Sandeen
2026-10-05 20:20 ` Darrick J. Wong
2026-10-05 20:43 ` Eric Sandeen
2026-10-05 21:17 ` Darrick J. Wong
2026-10-06 8:32 ` Carlos Maiolino
2026-10-07 13:52 ` Christoph Hellwig
2026-10-07 15:25 ` [PATCH V3 " Eric Sandeen
2026-10-08 11:02 ` Carlos Maiolino
2026-10-02 21:08 ` [PATCH 3/3] xfs: re-use refcount scrub/repair code for rtrefcount Eric Sandeen
2026-10-05 20:38 ` Darrick J. Wong
2026-10-06 8:25 ` Carlos Maiolino
2026-10-07 13:51 ` Christoph Hellwig
2026-10-07 15:32 ` Eric Sandeen
2026-10-07 15:37 ` Darrick J. Wong
2026-10-08 11:15 ` Carlos Maiolino
2026-10-08 11:09 ` Carlos Maiolino
2026-10-08 13:32 ` [PATCH 0/3] xfs: more misc code deduplication Carlos Maiolino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asOXG8ePgukShDRq@nidhogg.toxiclabs.cc \
--to=cem@kernel.org \
--cc=djwong@kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=sandeen@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox