From: Bin Meng <bin.meng@processmission.com>
To: QEMU <qemu-devel@nongnu.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
qemu-arm@nongnu.org
Subject: [PATCH v2 20/32] hw/arm: phytium: Add Phytium E2000 xHCI controllers
Date: Tue, 8 Sep 2026 18:41:29 +0800 [thread overview]
Message-ID: <20260908104159.1621764-21-bin.meng@processmission.com> (raw)
In-Reply-To: <20260908104159.1621764-1-bin.meng@processmission.com>
Instantiate two sysbus xHCI controllers at the documented addresses
and wire their single interrupts to the GIC. Match the platform quirk
by disabling streams and expose one paired USB 2.0/3.0 root port per
controller.
Signed-off-by: Bin Meng <bin.meng@processmission.com>
---
Changes in v2:
- Move the xHCI controllers into the E2000 SoC
include/hw/arm/phytium_e2000.h | 2 ++
hw/arm/phytium_e2000.c | 32 ++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 1 +
3 files changed, 35 insertions(+)
diff --git a/include/hw/arm/phytium_e2000.h b/include/hw/arm/phytium_e2000.h
index 228d1ecab0..079f7298e9 100644
--- a/include/hw/arm/phytium_e2000.h
+++ b/include/hw/arm/phytium_e2000.h
@@ -51,6 +51,8 @@ enum {
PHYTIUM_E2000_PCIE_CTRL,
PHYTIUM_E2000_PCIE_PHY_CTRL,
PHYTIUM_E2000_BOARD_CTRL,
+ PHYTIUM_E2000_XHCI0,
+ PHYTIUM_E2000_XHCI1,
PHYTIUM_E2000_GEM0,
PHYTIUM_E2000_GEM1,
PHYTIUM_E2000_GEM2,
diff --git a/hw/arm/phytium_e2000.c b/hw/arm/phytium_e2000.c
index c282de7088..e74005289f 100644
--- a/hw/arm/phytium_e2000.c
+++ b/hw/arm/phytium_e2000.c
@@ -31,6 +31,7 @@
#include "hw/pci-host/gpex.h"
#include "hw/sd/sd.h"
#include "hw/ssi/phytium_qspi.h"
+#include "hw/usb/xhci.h"
#include "net/net.h"
#include "qobject/qlist.h"
#include "qom/object.h"
@@ -43,6 +44,7 @@
#define PHYTIUM_E2000_NUM_IRQS 256
#define PHYTIUM_E2000_NUM_UARTS 7
+#define PHYTIUM_E2000_NUM_XHCIS 2
#define PHYTIUM_E2000_MHU_BASE 0x32a00000
#define PHYTIUM_E2000_SCP_SRAM_BASE 0x32a10000
@@ -79,6 +81,8 @@ const MemMapEntry phytium_e2000_memmap[] = {
[PHYTIUM_E2000_PCIE_CTRL] = { 0x31000000, 0x00200000 },
[PHYTIUM_E2000_PCIE_PHY_CTRL] = { 0x31500000, 0x00001000 },
[PHYTIUM_E2000_BOARD_CTRL] = { 0x31800000, 0x01400000 },
+ [PHYTIUM_E2000_XHCI0] = { 0x31a08000, 0x00018000 },
+ [PHYTIUM_E2000_XHCI1] = { 0x31a28000, 0x00018000 },
[PHYTIUM_E2000_GEM0] = { 0x3200c000, 0x00002000 },
[PHYTIUM_E2000_GEM1] = { 0x3200e000, 0x00002000 },
[PHYTIUM_E2000_GEM2] = { 0x32010000, 0x00002000 },
@@ -112,6 +116,11 @@ static const int phytium_e2000_uart_irqmap[] = {
static const int phytium_e2000_i2c_irq = 106;
+static const int phytium_e2000_xhci_irqmap[] = {
+ [0] = 16,
+ [1] = 17,
+};
+
static const uint8_t phytium_e2000_gem_num_queues[] = { 8, 4, 4, 4 };
static const int
@@ -397,6 +406,26 @@ static void phytium_e2000_create_gem(PhytiumE2000SoCState *s, int index)
}
}
+static void phytium_e2000_create_xhci(PhytiumE2000SoCState *s, int index)
+{
+ int map_idx = PHYTIUM_E2000_XHCI0 + index;
+ DeviceState *dev = qdev_new(TYPE_XHCI_SYSBUS);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ g_autofree char *name = g_strdup_printf("xhci%d", index);
+
+ object_property_add_child(OBJECT(s), name, OBJECT(dev));
+ qdev_prop_set_uint32(dev, "intrs", 1);
+ qdev_prop_set_uint32(dev, "slots", XHCI_MAXSLOTS);
+ qdev_prop_set_uint32(dev, "p2", 1);
+ qdev_prop_set_uint32(dev, "p3", 1);
+ qdev_prop_set_bit(dev, "streams", false);
+ sysbus_realize_and_unref(sbd, &error_fatal);
+ sysbus_mmio_map_overlap(
+ sbd, 0, phytium_e2000_memmap[map_idx].base, 2);
+ sysbus_connect_irq(sbd, 0,
+ qdev_get_gpio_in(s->gic, phytium_e2000_xhci_irqmap[index]));
+}
+
/* The vendor DT maps root-bus INTx solely by pin */
static int phytium_e2000_pcie_map_irq(PCIDevice *pdev, int pin)
{
@@ -792,6 +821,9 @@ static void phytium_e2000_soc_realize(DeviceState *dev, Error **errp)
phytium_e2000_create_uart(s, i);
}
phytium_e2000_create_i2c(s);
+ for (i = 0; i < PHYTIUM_E2000_NUM_XHCIS; i++) {
+ phytium_e2000_create_xhci(s, i);
+ }
for (i = 0; i < PHYTIUM_E2000_NUM_GEMS; i++) {
phytium_e2000_create_gem(s, i);
}
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index a77a4c2a09..39a7f77611 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -141,6 +141,7 @@ config PHYTIUM_E2000
select PL011
select SD
select UNIMP
+ select USB_XHCI_SYSBUS
config REALVIEW
bool
--
2.53.0
next prev parent reply other threads:[~2026-09-08 10:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 10:41 [PATCH v2 00/32] hw/arm: Add Phytium E2000Q SoC and board support Bin Meng
2026-09-08 10:41 ` [PATCH v2 01/32] hw/arm: Add Phytium E2000 SoC and Phytium Pi machine Bin Meng
2026-09-08 10:41 ` [PATCH v2 02/32] hw/arm: phytium: Add Phytium E2000 PCIe host Bin Meng
2026-09-08 10:41 ` [PATCH v2 04/32] hw/sd: Add Phytium E2000 MCI controller Bin Meng
2026-09-08 10:41 ` [PATCH v2 05/32] hw/arm: phytium: Connect Phytium E2000 MCI controllers Bin Meng
2026-09-08 10:41 ` [PATCH v2 07/32] hw/arm: phytium: Connect Phytium E2000 GEM controllers Bin Meng
2026-09-08 10:41 ` [PATCH v2 08/32] hw/misc: Add Phytium E2000 DDR controller Bin Meng
2026-09-08 10:41 ` [PATCH v2 09/32] hw/arm: phytium: Connect the " Bin Meng
2026-09-08 10:41 ` [PATCH v2 10/32] hw/misc: Add Phytium E2000 MHU doorbell Bin Meng
2026-09-08 10:41 ` [PATCH v2 11/32] hw/arm: phytium: Connect the Phytium E2000 MHU Bin Meng
2026-09-08 10:41 ` [PATCH v2 12/32] hw/ssi: Add Phytium E2000 QSPI controller Bin Meng
2026-09-08 10:41 ` [PATCH v2 13/32] hw/arm: phytium: Connect the " Bin Meng
2026-09-08 10:41 ` [PATCH v2 14/32] hw/misc: Add Phytium E2000 PBR model Bin Meng
2026-09-08 10:41 ` [PATCH v2 15/32] hw/arm: phytium: Integrate the Phytium E2000 PBR Bin Meng
2026-09-08 10:41 ` [PATCH v2 16/32] hw/arm: phytium: Add Phytium E2000 control region placeholders Bin Meng
2026-09-08 10:41 ` [PATCH v2 17/32] hw/misc: Support Phytium E2000 SCMI CPU power control Bin Meng
2026-09-08 10:41 ` [PATCH v2 18/32] hw/arm: phytium: Select the Phytium E2000 PBR boot medium Bin Meng
2026-09-08 10:41 ` [PATCH v2 19/32] hw/arm: phytium: Connect the Phytium E2000 I2C controller Bin Meng
2026-09-08 10:41 ` Bin Meng [this message]
2026-09-08 10:41 ` [PATCH v2 21/32] hw/misc: Model the Phytium E2000 random generator Bin Meng
2026-09-08 10:41 ` [PATCH v2 22/32] hw/arm: phytium: Connect " Bin Meng
2026-09-08 10:41 ` [PATCH v2 23/32] hw/arm: phytium: Support Phytium E2000 direct Linux boot Bin Meng
2026-09-08 10:41 ` [PATCH v2 24/32] hw/arm: phytium: Add Phytium E2000Q COMe machine Bin Meng
2026-09-08 10:41 ` [PATCH v2 26/32] hw/arm: phytium: Connect the Phytium E2000Q COMe QSPI flash Bin Meng
2026-09-08 10:41 ` [PATCH v2 27/32] hw/arm: phytium: Add Phytium E2000 AHCI controllers Bin Meng
2026-09-08 10:41 ` [PATCH v2 28/32] hw/arm: Add Phytium E2000 Linux SCMI channel Bin Meng
2026-09-08 10:41 ` [PATCH v2 29/32] hw/arm: phytium: Connect the Phytium E2000 SMMUv3 Bin Meng
2026-09-08 10:41 ` [PATCH v2 30/32] docs/system/arm: Document Phytium E2000 machines Bin Meng
2026-09-08 10:41 ` [PATCH v2 31/32] tests/functional/aarch64: Add Phytium Pi boot tests Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260908104159.1621764-21-bin.meng@processmission.com \
--to=bin.meng@processmission.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox