From: Matthew Blakley <zarcher@yahoo.com>
To: linux-smp@vger.kernel.org
Subject: unexpected IO-APIC
Date: Wed, 17 Dec 2003 23:21:57 -0800 (PST) [thread overview]
Message-ID: <20031218072157.91374.qmail@web40204.mail.yahoo.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 200 bytes --]
sending as requested, let me know if any additional information is needed.
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
[-- Attachment #2: dmesg-knoppix-intel-d865perl.txt --]
[-- Type: text/plain, Size: 15342 bytes --]
L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05
per-CPU timeslice cutoff: 1462.56 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5583.66 BogoMIPS
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05
Total of 2 processors activated (11154.22 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 25.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 1 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 003 03 1 1 0 1 0 1 1 B9
13 003 03 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 003 03 1 1 0 1 0 1 1 C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2793.0354 MHz.
..... host bus clock speed is 199.5024 MHz.
cpu: 0, clocks: 1995024, slice: 665008
CPU0<T0:1995024,T1:1330016,D:0,S:665008,C:1995024>
cpu: 1, clocks: 1995024, slice: 665008
CPU1<T0:1995024,T1:665008,D:0,S:665008,C:1995024>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router default [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I2,P0) -> 17
PCI->APIC IRQ transform: (B2,I7,P0) -> 17
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe8000000, mapped to 0xf880d000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0a15
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: BIOS setup was incomplete.
PCI_IDE: chipset revision 2
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=24d1
PCI_IDE: chipset revision 2
PCI_IDE: 100% native mode on irq 18
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
hda: WDC WD400BB-00CFC0, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
hdc: PLEXTOR CD-R PX-W1610A, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
hda: [PTBL] [4865/255/63] hda1
hdb: hdb1 hdb2 hdb3
hdd:<3>ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 0
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 2
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 6
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 0
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 2
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 6
ldm_validate_partition_table(): Disk read failed.
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 0
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 2
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 6
unable to read partition table
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: IOMEGA Model: ZIP 100 Rev: 14.A
Type: Direct-Access ANSI SCSI revision: 00
Vendor: PLEXTOR Model: CD-R PX-W1610A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
unable to read partition table
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 462k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /cdrom/KNOPPIX/KNOPPIX: 29891 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded (max 1 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe (power off active).
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
unloading Kernel Card Services
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
hub.c: new USB device 00:1d.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x45e/0x39) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hiddev
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 3, frame# 531
input0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ohci1394: $Rev: 578 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[feafe000-feafe7ff] Max Packet=[2048]
ieee1394: Host added: Node[00:1023] GUID[000cf100009abc38] [Linux OHCI-1394]
ieee1394: Host removed: Node[00:1023] GUID[000cf100009abc38] [Linux OHCI-1394]
i810_rng hardware driver 0.9.8 loaded
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:02:B3:49:46:BE, IRQ 17.
Board assembly 721383-017, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
FAT: Did not find valid FSINFO signature.
Found signature1 0x66024a1e signature2 0xc88b6602 sector=4.
VFS: Can't find a valid FAT filesystem on dev 03:01.
FAT: Did not find valid FSINFO signature.
Found signature1 0x66024a1e signature2 0xc88b6602 sector=4.
VFS: Can't find a valid FAT filesystem on dev 03:01.
NTFS driver v1.1.22 [Flags: R/W MODULE]
Journalled Block Device driver loaded
VFS: Can't find ext3 filesystem on dev ide0(3,67).
VFS: Can't find ext2 filesystem on dev ide0(3,67).
Unable to identify CD-ROM format.
read_super_block: can't find a reiserfs filesystem on (dev 03:43, block 64, size 1024)
read_super_block: can't find a reiserfs filesystem on (dev 03:43, block 8, size 1024)
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:43.
SGI XFS snapshot 2.4.20-2002-11-29_01:21_UTC with ACLs, DMAPI, realtime, quota, no debug enabled
XFS: bad magic number
XFS: SB validate failed
VFS: Can't find a Minix or Minix V2 filesystem on device 03:43.
VFS: Can't find a HFS filesystem on dev 03:43.
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
Device not ready. Make sure there is a disc in the drive.
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 28
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
unable to read partition table
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 0
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 2
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 6
end_request: I/O error, dev 02:00 (floppy), sector 0
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:43.
next reply other threads:[~2003-12-18 7:21 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-18 7:21 Matthew Blakley [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-06 20:37 unexpected IO-APIC Danielle Hines
2006-07-07 13:12 ` Erik Mouw
2006-03-07 4:19 Mimi Zhou
2005-07-12 13:56 Unexpected IO-APIC Bill Baker
2005-07-12 16:42 ` randy_dunlap
2005-06-18 5:04 unexpected IO-APIC darshan
2005-05-26 8:44 Bernd Strebel
2005-05-27 5:33 ` randy_dunlap
2005-05-27 9:26 ` Bernd Strebel
2005-05-27 17:30 ` randy_dunlap
2005-05-27 22:24 ` Bernd Strebel
2005-05-30 22:43 ` randy_dunlap
2005-03-14 20:48 Unexpected IO-APIC Iuri Wickert
2005-03-15 20:32 ` Randy.Dunlap
2005-03-05 21:48 Marco van Beek
2005-03-15 20:23 ` Randy.Dunlap
2005-02-28 23:34 unexpected IO-APIC Mike Farnam
2005-03-15 17:48 ` Randy.Dunlap
2005-03-15 20:14 ` Randy.Dunlap
2005-01-31 17:41 Gary Buckmaster
2005-01-25 18:23 Unexpected IO-APIC Martin Slovacek
2005-01-25 18:59 ` Earle Nietzel
2004-12-28 6:58 unexpected IO-APIC Paul
2004-12-06 4:23 unexpected io-apic Simon Story
2004-07-23 20:33 unexpected IO-APIC Thomas Schlag
2004-07-08 7:52 S.K.Goel
2004-06-23 11:44 Jörg Lübbert
2004-06-23 11:42 Jörg Lübbert
2004-06-18 18:15 Unexpected IO-APIC GIN (Garreth Jeremiah)
2004-04-23 8:28 unexpected IO-APIC Piers Lauder
2004-04-18 17:53 dpn22
2004-04-07 8:11 JKolk
2004-04-01 14:32 Ian Jenkinson
2004-02-24 15:07 Unexpected IO-APIC Lyle Worthington
2004-02-24 16:38 ` Randy.Dunlap
2004-02-24 18:03 ` Lyle Worthington
2004-02-24 18:31 ` Randy.Dunlap
2004-02-15 8:24 unexpected IO-APIC Massa Takeuti
2004-01-16 3:40 Polyhead
2004-01-11 8:53 Russ McCallister
2003-12-13 5:50 Sterling Chavis
2003-11-23 6:38 W M Brelsford
2003-11-20 3:09 Chris Johns
2003-11-12 21:16 A.J. Duijn
2003-10-16 17:44 Lance Davis
2003-09-25 15:09 Unexpected IO-APIC David van Hoose
2003-09-11 16:36 unexpected IO-APIC John Birck
2003-09-04 16:37 Michael Sorrentino
2003-09-04 19:35 ` Alan Cox
2003-09-04 4:19 Unexpected IO-APIC Jeremy Sylvestre
2003-09-01 12:31 Alfonso Abeger
2003-08-21 7:51 Grage, Sascha
2003-08-12 15:40 unexpected IO-APIC Tom Parker
2003-08-08 16:49 Christian Stein
2003-07-29 13:52 Schulman.Andrew
2003-07-17 15:09 Unexpected IO-APIC Joe Brown
2003-07-12 23:34 unexpected IO-APIC Toth Szabolcs
2003-07-13 4:09 ` Randy.Dunlap
2003-06-09 21:52 Unexpected IO-APIC Julian R. Coombes
2003-06-07 10:06 unexpected IO-APIC Toni Mueller
2003-06-07 17:40 ` Randy.Dunlap
2003-06-05 10:37 Mimmus
2003-06-05 14:42 ` Randy.Dunlap
2003-06-04 2:19 Greg Norris
2003-05-29 19:44 Jürgen Adler
2003-05-24 3:15 Brian Laflum
2003-05-23 3:57 Ben Osborne
2003-05-25 20:07 ` Alan Cox
2003-05-22 7:02 Anders Tor Westerberg
2003-04-22 6:41 Ilo Lorusso
2003-04-18 2:43 Phaedrus
2003-04-16 23:36 lk
2003-04-17 11:43 ` Earle R. Nietzel
2003-04-17 18:46 ` lk
2003-04-17 20:28 ` Randy.Dunlap
2003-04-17 22:52 ` lk
2003-04-17 23:14 ` Randy.Dunlap
2003-04-10 12:22 Unexpected IO-APIC Milan Kerslager
2003-03-31 19:35 unexpected IO-APIC Pascal Hofmann
2003-03-27 18:03 Dennis Lambe Jr.
2003-03-27 12:13 Jakub Zawierucha
2003-03-15 11:46 Peter Ruskin
2003-03-08 17:14 Scott Beck
2003-03-02 15:03 Lorant Dobos
2003-02-27 8:14 Nick Gaugler
2003-02-22 0:50 Peter Ruskin
2003-02-06 22:59 Philipp Berndt
2003-02-01 22:15 Luis Claudio Pérez Tato
2003-01-30 11:24 Joern Strassemeyer
2003-01-30 6:55 Andrew Egin
2003-01-18 16:48 Andy Igoshin
2003-01-10 10:04 frontal
2003-01-03 6:19 Chris
2002-12-28 10:32 Jonathan Araña Cruz
2002-12-27 8:53 Marc
2002-12-19 5:21 Carlos Madrid
2002-12-17 14:46 Christian Heimanns
2002-12-16 12:21 Unexpected IO-APIC Pasquale Federico Zema
2002-12-10 9:50 unexpected IO-APIC Juan Pedro Paredes
2002-12-06 4:41 Toni Cerdà
2002-12-02 11:30 huba
2002-11-28 23:22 Erik Meusel
2002-11-29 0:40 ` Alan Cox
2002-11-27 10:42 Nigbur, Rolf (IKK-Bundesverband)
2002-11-27 12:36 ` Alan Cox
2002-11-25 9:59 Vitor Dias da Silva
2002-11-23 0:15 Unexpected IO-APIC Mick
2002-11-22 7:33 dix.edv
2002-10-20 22:43 unexpected IO-APIC John Osswald
2002-10-03 19:12 Unexpected IO-APIC Alexander Tsibulsky
2002-09-16 13:54 unexpected IO-APIC Juergen Rose
2002-08-24 12:21 Unexpected IO-APIC David Brownell
2002-08-18 14:27 unexpected IO-APIC Kim Bisgaard
2002-07-26 21:42 Joseph S. Wigton
2002-07-19 16:15 Barry Gamblin
2002-07-06 19:59 Paul Parsons
2002-06-28 19:05 Unexpected IO-APIC Jawaid.Bazyar
2002-06-20 15:26 Andrew Ott
2002-06-17 4:03 unexpected IO-APIC Adam Powers
2002-06-15 1:25 Steve Keith
2002-06-06 3:38 Chris Kogelnik
2002-06-01 18:52 Luigi Rosa
2002-06-01 19:59 ` Vladimir G. Ivanovic
2002-06-02 23:03 ` Randy.Dunlap
2002-05-31 12:43 Françoise Guilbault
2002-05-20 13:41 zoli
2002-05-20 14:31 ` Alan Cox
2002-05-03 23:00 unexpected io-apic Schroettner Robert
2002-05-03 8:10 unexpected IO-APIC Giulio Bottazzi
2002-04-09 18:52 Mauricio Girardi
2002-04-08 9:31 Paul Hemstock
2002-04-08 14:46 ` Randy.Dunlap
2001-09-03 10:30 Matt Bernstein
2000-12-19 17:37 Mathieu Chouquet-Stringer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031218072157.91374.qmail@web40204.mail.yahoo.com \
--to=zarcher@yahoo.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.