All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc <m.dx@wanadoo.nl>
To: linux-smp@vger.kernel.org
Subject: unexpected IO-APIC
Date: Fri, 27 Dec 2002 09:53:32 +0100	[thread overview]
Message-ID: <3E0C150C.5020501@wanadoo.nl> (raw)

Found this in my dmesg output:
  WARNING: unexpected IO-APIC, please mail
           to linux-smp@vger.kernel.org

so here it is ;-)

Regards,
Marc Dierikx
----

Linux version 2.5.50 (root@clara) (gcc version 3.2 20020903 (Red Hat 
Linux 8.0 3.2-7)) #27 Mon Dec 2 21:01:24 GMT-5 2002
Video mode to be used for restore is 31b
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000f58e0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 65520
   DMA zone: 4096 pages, LIFO batch:1
   Normal zone: 61424 pages, LIFO batch:14
   HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 AWARD                      ) @ 0x000f72b0
ACPI: RSDT (v001 AWARD  AWRDACPI 16944.11825) @ 0x0fff3000
ACPI: FADT (v001 AWARD  AWRDACPI 16944.11825) @ 0x0fff3040
ACPI: MADT (v001 AWARD  AWRDACPI 16944.11825) @ 0x0fff69c0
ACPI: DSDT (v001 AWARD  AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] 
trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] 
trigger[0x0])
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: ro root=LABEL=/ vga=795
Initializing CPU#0
Detected 2672.299 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 5275.64 BogoMIPS
Memory: 255624k/262080k available (1743k kernel code, 5752k reserved, 
674k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
  IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 
2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178014
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0014
  WARNING: unexpected IO-APIC, please mail
           to linux-smp@vger.kernel.org
.... register #02: 02000000
.......     : arbitration: 02
.... IRQ redirection table:
  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
  00 000 00  1    0    0   0   0    0    0    00
  01 001 01  0    0    0   0   0    1    1    39
  02 001 01  0    0    0   0   0    1    1    31
  03 001 01  0    0    0   0   0    1    1    41
  04 001 01  0    0    0   0   0    1    1    49
  05 001 01  0    0    0   0   0    1    1    51
  06 001 01  0    0    0   0   0    1    1    59
  07 001 01  0    0    0   0   0    1    1    61
  08 001 01  0    0    0   0   0    1    1    69
  09 001 01  0    0    0   0   0    1    1    71
  0a 001 01  0    0    0   0   0    1    1    79
  0b 001 01  0    0    0   0   0    1    1    81
  0c 001 01  0    0    0   0   0    1    1    89
  0d 001 01  0    0    0   0   0    1    1    91
  0e 001 01  0    0    0   0   0    1    1    99
  0f 001 01  0    0    0   0   0    1    1    A1
  10 000 00  1    0    0   0   0    0    0    00
  11 000 00  1    0    0   0   0    0    0    00
  12 000 00  1    0    0   0   0    0    0    00
  13 000 00  1    0    0   0   0    0    0    00
  14 000 00  1    0    0   0   0    0    0    00
  15 000 00  1    0    0   0   0    0    0    00
  16 000 00  1    0    0   0   0    0    0    00
  17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2672.0346 MHz.
..... host bus clock speed is 133.0617 MHz.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
mtrr: v2.0 (20020519)
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20021122
     ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
     ACPI-0511: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, 
enabled at IRQ 13)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.9 (c) Adam Belay
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe30
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe60, dseg 0xf0000
pnp: 00:0b: ioport range 0x1000-0x107f has been reserved
pnp: 00:0b: ioport range 0x10c0-0x10df has been reserved
pnp: 00:0c: ioport range 0x3f0-0x3f1 has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
block request queues:
  128 requests per read queue
  128 requests per write queue
  8 requests per batch
  enter congestion at 31
  exit congestion at 33
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17)
00:00:06[A] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18)
00:00:06[B] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19)
00:00:06[C] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16)
00:00:06[D] -> 2-16 -> IRQ 16
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc9 -> IRQ 20)
00:00:03[A] -> 2-20 -> IRQ 20
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21)
00:00:03[B] -> 2-21 -> IRQ 21
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22)
00:00:03[C] -> 2-22 -> IRQ 22
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23)
00:00:03[D] -> 2-23 -> IRQ 23
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'
aio_setup: sizeof(struct page) = 40
[c1292080] eventpoll: successfully initialized.
Journalled Block Device driver loaded
NTFS driver 2.1.0 [Flags: R/O].
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [FUTS]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (16 C)
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
vesafb: framebuffer at 0xd8000000, mapped to 0xd080b000, size 131072k
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: protected mode interface info at c000:def0
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Uninitialised timer!
This is just a warning.  Your computer is OK
function=0xc024a5dc, data=0x0
Call Trace: [<c01246bb>]  [<c024a5dc>]  [<c01246fd>]  [<c024a98d>] 
[<c021a351>]  [<c011e9b9>]  [<c0249c57>]  [<c010506f>]  [<c0105032>] 
[<c0108bf5>]
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS648    ATA 133 controller
     ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
     ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
hda: ST3120023A, ATA DISK drive
hdb: JLMS DVD-ROM LTD-165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY CD-RW CRX210E1, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=14593/255/63, 
UDMA(100)
  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdb, sector 0
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
end_request: I/O error, dev hdc, sector 0
SCSI subsystem driver Revision: 1.00
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.07 2002-Oct-24, 1 devices found
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 222k freed
VFS: Mounted root (ext2 filesystem).
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,7), internal journal
Adding 530104k swap on /dev/hda8.  Priority:-1 extents:1
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS volume version 3.1.
blk: queue c03c845c, I/O limit 4095Mb (mask 0xffffffff)


             reply	other threads:[~2002-12-27  8:53 UTC|newest]

Thread overview: 135+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-27  8:53 Marc [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-07-06 20:37 unexpected IO-APIC Danielle Hines
2006-07-07 13:12 ` Erik Mouw
2006-03-07  4:19 Mimi Zhou
2005-07-12 13:56 Unexpected IO-APIC Bill Baker
2005-07-12 16:42 ` randy_dunlap
2005-06-18  5:04 unexpected IO-APIC darshan
2005-05-26  8:44 Bernd Strebel
2005-05-27  5:33 ` randy_dunlap
2005-05-27  9:26   ` Bernd Strebel
2005-05-27 17:30     ` randy_dunlap
2005-05-27 22:24       ` Bernd Strebel
2005-05-30 22:43     ` randy_dunlap
2005-03-14 20:48 Unexpected IO-APIC Iuri Wickert
2005-03-15 20:32 ` Randy.Dunlap
2005-03-05 21:48 Marco van Beek
2005-03-15 20:23 ` Randy.Dunlap
2005-02-28 23:34 unexpected IO-APIC Mike Farnam
2005-03-15 17:48 ` Randy.Dunlap
2005-03-15 20:14 ` Randy.Dunlap
2005-01-31 17:41 Gary Buckmaster
2005-01-25 18:23 Unexpected IO-APIC Martin Slovacek
2005-01-25 18:59 ` Earle Nietzel
2004-12-28  6:58 unexpected IO-APIC Paul
2004-12-06  4:23 unexpected io-apic Simon Story
2004-07-23 20:33 unexpected IO-APIC Thomas Schlag
2004-07-08  7:52 S.K.Goel
2004-06-23 11:44 Jörg Lübbert
2004-06-23 11:42 Jörg Lübbert
2004-06-18 18:15 Unexpected IO-APIC GIN (Garreth Jeremiah)
2004-04-23  8:28 unexpected IO-APIC Piers Lauder
2004-04-18 17:53 dpn22
2004-04-07  8:11 JKolk
2004-04-01 14:32 Ian Jenkinson
2004-02-24 15:07 Unexpected IO-APIC Lyle Worthington
2004-02-24 16:38 ` Randy.Dunlap
2004-02-24 18:03   ` Lyle Worthington
2004-02-24 18:31     ` Randy.Dunlap
2004-02-15  8:24 unexpected IO-APIC Massa Takeuti
2004-01-16  3:40 Polyhead
2004-01-11  8:53 Russ McCallister
2003-12-18  7:21 Matthew Blakley
2003-12-13  5:50 Sterling Chavis
2003-11-23  6:38 W M Brelsford
2003-11-20  3:09 Chris Johns
2003-11-12 21:16 A.J. Duijn
2003-10-16 17:44 Lance Davis
2003-09-25 15:09 Unexpected IO-APIC David van Hoose
2003-09-11 16:36 unexpected IO-APIC John Birck
2003-09-04 16:37 Michael Sorrentino
2003-09-04 19:35 ` Alan Cox
2003-09-04  4:19 Unexpected IO-APIC Jeremy Sylvestre
2003-09-01 12:31 Alfonso Abeger
2003-08-21  7:51 Grage, Sascha
2003-08-12 15:40 unexpected IO-APIC Tom Parker
2003-08-08 16:49 Christian Stein
2003-07-29 13:52 Schulman.Andrew
2003-07-17 15:09 Unexpected IO-APIC Joe Brown
2003-07-12 23:34 unexpected IO-APIC Toth Szabolcs
2003-07-13  4:09 ` Randy.Dunlap
2003-06-09 21:52 Unexpected IO-APIC Julian R. Coombes
2003-06-07 10:06 unexpected IO-APIC Toni Mueller
2003-06-07 17:40 ` Randy.Dunlap
2003-06-05 10:37 Mimmus
2003-06-05 14:42 ` Randy.Dunlap
2003-06-04  2:19 Greg Norris
2003-05-29 19:44 Jürgen Adler
2003-05-24  3:15 Brian Laflum
2003-05-23  3:57 Ben Osborne
2003-05-25 20:07 ` Alan Cox
2003-05-22  7:02 Anders Tor Westerberg
2003-04-22  6:41 Ilo Lorusso
2003-04-18  2:43 Phaedrus
2003-04-16 23:36 lk
2003-04-17 11:43 ` Earle R. Nietzel
2003-04-17 18:46   ` lk
2003-04-17 20:28     ` Randy.Dunlap
2003-04-17 22:52       ` lk
2003-04-17 23:14         ` Randy.Dunlap
2003-04-10 12:22 Unexpected IO-APIC Milan Kerslager
2003-03-31 19:35 unexpected IO-APIC Pascal Hofmann
2003-03-27 18:03 Dennis Lambe Jr.
2003-03-27 12:13 Jakub Zawierucha
2003-03-15 11:46 Peter Ruskin
2003-03-08 17:14 Scott Beck
2003-03-02 15:03 Lorant Dobos
2003-02-27  8:14 Nick Gaugler
2003-02-22  0:50 Peter Ruskin
2003-02-06 22:59 Philipp Berndt
2003-02-01 22:15 Luis Claudio Pérez Tato
2003-01-30 11:24 Joern Strassemeyer
2003-01-30  6:55 Andrew Egin
2003-01-18 16:48 Andy Igoshin
2003-01-10 10:04 frontal
2003-01-03  6:19 Chris
2002-12-28 10:32 Jonathan Araña Cruz
2002-12-19  5:21 Carlos Madrid
2002-12-17 14:46 Christian Heimanns
2002-12-16 12:21 Unexpected IO-APIC Pasquale Federico Zema
2002-12-10  9:50 unexpected IO-APIC Juan Pedro Paredes
2002-12-06  4:41 Toni Cerdà
2002-12-02 11:30 huba
2002-11-28 23:22 Erik Meusel
2002-11-29  0:40 ` Alan Cox
2002-11-27 10:42 Nigbur, Rolf (IKK-Bundesverband)
2002-11-27 12:36 ` Alan Cox
2002-11-25  9:59 Vitor Dias da Silva
2002-11-23  0:15 Unexpected IO-APIC Mick
2002-11-22  7:33 dix.edv
2002-10-20 22:43 unexpected IO-APIC John Osswald
2002-10-03 19:12 Unexpected IO-APIC Alexander Tsibulsky
2002-09-16 13:54 unexpected IO-APIC Juergen Rose
2002-08-24 12:21 Unexpected IO-APIC David Brownell
2002-08-18 14:27 unexpected IO-APIC Kim Bisgaard
2002-07-26 21:42 Joseph S. Wigton
2002-07-19 16:15 Barry Gamblin
2002-07-06 19:59 Paul Parsons
2002-06-28 19:05 Unexpected IO-APIC Jawaid.Bazyar
2002-06-20 15:26 Andrew Ott
2002-06-17  4:03 unexpected IO-APIC Adam Powers
2002-06-15  1:25 Steve Keith
2002-06-06  3:38 Chris Kogelnik
2002-06-01 18:52 Luigi Rosa
2002-06-01 19:59 ` Vladimir G. Ivanovic
2002-06-02 23:03   ` Randy.Dunlap
2002-05-31 12:43 Françoise Guilbault
2002-05-20 13:41 zoli
2002-05-20 14:31 ` Alan Cox
2002-05-03 23:00 unexpected io-apic Schroettner Robert
2002-05-03  8:10 unexpected IO-APIC Giulio Bottazzi
2002-04-09 18:52 Mauricio Girardi
2002-04-08  9:31 Paul Hemstock
2002-04-08 14:46 ` Randy.Dunlap
2001-09-03 10:30 Matt Bernstein
2000-12-19 17:37 Mathieu Chouquet-Stringer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3E0C150C.5020501@wanadoo.nl \
    --to=m.dx@wanadoo.nl \
    --cc=linux-smp@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.