unexpected IO-APIC

[thomas.schlag@t-online.de (Thomas Schlag)]

[-- Attachment #1: Type: text/plain, Size: 131 bytes --]

This is the report as asked for in the var/.../boot.msg message
in the text-file, the critical message is marked red.

kind regards

[-- Attachment #2: boot.msg --]
[-- Type: application/octet-stream, Size: 26161 bytes --]

Inspecting /boot/System.map-2.4.21-99-smp4G
Loaded 21822 symbols from /boot/System.map-2.4.21-99-smp4G.
Symbols match kernel version 2.4.21.
Loaded 980 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.21-99-smp4G (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 SMP Wed Sep 24 14:13:20 UTC 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
<4> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
<4> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
<4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
<4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
<5>128MB vmalloc/ioremap area available.
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>ACPI: have wakeup address 0xc0002000
<4>found SMP MP-table at 000ff780
<4>hm, page 000ff000 reserved twice.
<4>hm, page 00100000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 261936
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 32560 pages.
<6>ACPI: RSDP (v000 ACPIAM                     ) @ 0x000f9e60
<6>ACPI: RSDT (v001 A M I  OEMRSDT  01792.00801) @ 0x3ff30000
<6>ACPI: FADT (v002 A M I  OEMFACP  01792.00801) @ 0x3ff30200
<6>ACPI: MADT (v001 A M I  OEMAPIC  01792.00801) @ 0x3ff30390
<6>ACPI: OEMB (v001 A M I  OEMBIOS  01792.00801) @ 0x3ff40040
<6>ACPI: DSDT (v001  P4CED P4CED084 00000.00132) @ 0x00000000
<6>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 16
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<4>Processor #1 Pentium 4(tm) XEON(tm) APIC version 16
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
<6>IOAPIC[0]: Assigned apic_id 2
<4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
<6>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
<6>Using ACPI (MADT) for SMP configuration information
<4>Building zonelist for node : 0
<4>Kernel command line: root=/dev/sda2 vga=0x317 desktop splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>Detected 2599.023 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 5128.19 BogoMIPS
<6>Memory: 1022540k/1047744k available (1880k kernel code, 16496k reserved, 638k data, 188k init, 130240k highmem)
<6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU:             Common caps: bfebfbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU:             Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
<4>per-CPU timeslice cutoff: 1462.80 usecs.
<4>task migration cache decay timeout: 2 msecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 5193.72 BogoMIPS
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU:             Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
<6>Total of 2 processors activated (10321.92 BogoMIPS).
<4>cpu_sibling_map[0] = 1
<4>cpu_sibling_map[1] = 0
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>.......    : physical APIC id: 02
<7>.......    : Delivery Type: 0
<7>.......    : LTS          : 0
<7>.... register #01: 00178020
<7>.......     : max redirection entries: 0017
<7>.......     : PRQ implemented: 1
<7>.......     : IO APIC version: 0020
<7>.... register #02: 00178020
<7>.......     : arbitration: 00
<4>An unexpected IO-APIC was found. If this kernel release is less than
<4>three months old please report this to linux-smp@vger.kernel.org
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
<7> 00 000 00  1    0    0   0   0    0    0    00
<7> 01 003 03  0    0    0   0   0    1    1    39
<7> 02 003 03  0    0    0   0   0    1    1    31
<7> 03 003 03  0    0    0   0   0    1    1    41
<7> 04 003 03  0    0    0   0   0    1    1    49
<7> 05 003 03  0    0    0   0   0    1    1    51
<7> 06 003 03  0    0    0   0   0    1    1    59
<7> 07 003 03  0    0    0   0   0    1    1    61
<7> 08 003 03  0    0    0   0   0    1    1    69
<7> 09 003 03  1    1    0   0   0    1    1    71
<7> 0a 003 03  0    0    0   0   0    1    1    79
<7> 0b 003 03  0    0    0   0   0    1    1    81
<7> 0c 003 03  0    0    0   0   0    1    1    89
<7> 0d 003 03  0    0    0   0   0    1    1    91
<7> 0e 003 03  0    0    0   0   0    1    1    99
<7> 0f 003 03  0    0    0   0   0    1    1    A1
<7> 10 000 00  1    0    0   0   0    0    0    00
<7> 11 000 00  1    0    0   0   0    0    0    00
<7> 12 06C 0C  1    0    0   0   0    0    2    14
<7> 13 000 00  1    0    0   0   0    0    0    00
<7> 14 000 00  1    0    0   0   0    0    0    00
<7> 15 000 00  1    0    0   0   0    0    0    00
<7> 16 07D 0D  1    0    0   0   0    0    2    A4
<7> 17 000 00  1    0    0   0   0    0    0    00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 2598.0428 MHz.
<4>..... host bus clock speed is 199.0878 MHz.
<4>cpu: 0, clocks: 199878, slice: 66626
<4>CPU0<T0:199872,T1:133216,D:30,S:66626,C:199878>
<4>cpu: 1, clocks: 199878, slice: 66626
<4>CPU1<T0:199872,T1:66608,D:12,S:66626,C:199878>
<4>checking TSC synchronization across CPUs: passed.
<4>migration_task 0 on cpu=0
<4>migration_task 1 on cpu=1
<6>ACPI: Subsystem revision 20030619
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
<6>PCI: Using configuration type 1
<6>Looking for DSDT in initrd ... not found!
<7>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:1
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
<4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>PCI: Probing PCI hardware
<7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1
<7>00:00:1f[A] -> 2-18 -> IRQ 18
<7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1
<7>00:00:1f[B] -> 2-17 -> IRQ 17
<7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1
<7>00:00:1d[A] -> 2-16 -> IRQ 16
<7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1
<7>00:00:1d[B] -> 2-19 -> IRQ 19
<7>Pin 2-18 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1
<7>00:00:1d[D] -> 2-23 -> IRQ 23
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-16 already programmed
<7>Pin 2-17 already programmed
<7>Pin 2-18 already programmed
<7>Pin 2-19 already programmed
<7>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) Mode:1 Active:1
<7>00:03:08[A] -> 2-20 -> IRQ 20
<7>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) Mode:1 Active:1
<7>00:03:09[A] -> 2-21 -> IRQ 21
<7>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) Mode:1 Active:1
<7>00:03:09[B] -> 2-22 -> IRQ 22
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-21 already programmed
<7>Pin 2-22 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-20 already programmed
<7>Pin 2-23 already programmed
<7>Pin 2-18 already programmed
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
<5>apm: disabled - APM is not SMP safe.
<4>PISCH: Plug In Scheduler Interface (Version 6)
<4>Starting kswapd
<4>bigpage subsystem: allocated 0 bigpages (=0MB).
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<4>kinoded started
<5>VFS: Disk quotas vdquot_6.5.1
<5>aio_setup: num_physpages = 65484
<5>aio_setup: sizeof(struct page) = 48
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf881b000, size 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
<6>vesafb: protected mode interface info at c000:5739
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.0.9-2003/09/08: looking for picture... no good signature found.
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 16 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX-4: IDE controller at PCI slot 00:1f.1
<4>PCI: Enabling device 00:1f.1 (0005 -> 0007)
<6>PIIX-4: chipset revision 2
<6>PIIX-4: not 100%% native mode: will probe irqs later
<6>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
<6>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
<4>hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>ide-floppy driver 0.99.newide
<6>ide-floppy driver 0.99.newide
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>cryptoapi: loaded
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 435k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>SCSI subsystem driver Revision: 1.00
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<4>PROMISE FastTrak TX4000/376/378/S150 TX Series Linux Driver Version 1.00.0.19 
<6>scsi0 : ft3xx
<4>  Vendor: Promise   Model: 1X2 Mirror/RAID1  Rev: 1.10
<4>  Type:   Direct-Access                      ANSI SCSI revision: 02
<4>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<4>SCSI device sda: 312581632 512-byte hdwr sectors (160042 MB)
<6>Partition check:
<6> sda: sda1 sda2
<4>reiserfs: found format "3.6" with standard journal
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: using ordered data mode
<4>reiserfs: checking transaction log (device sd(8,2)) ...
<4>for (sd(8,2))
<4>Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 188k freed
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<4>reiserfs: enabling write barrier flush mode
<6>device-mapper: 4.0.1-ioctl (2003-07-12) initialised: dm@uk.sistina.com
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<4>reiserfs: enabling write barrier flush mode
<6>Adding Swap: 1052216k swap-space (priority 42)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Fri Jul 23 23:19:32 2004

<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.md boot.device-mapper)
Run file system check on root for device mapper setup
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x802 of format 3.6 with standard journal
Blocks (total/free): 38807015/35707032 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneRemounting root file system (/) read/write...
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
Remounting root file system (/) read-only again...
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.lvm)
<notice>exit status of (boot.lvm) is (0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x802 of format 3.6 with standard journal
Blocks (total/free): 38807015/35707032 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneMounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.quota)
<notice>exit status of (boot.quota) is (0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'P2400'done
Setting up loopback interface done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(35,29)
System Boot Control: The system has been setup
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
done<notice>killproc: kill(35,3)


Boot logging started on /dev/tty1(/dev/console) at Fri Jul 23 21:19:51 2004

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn)
Initializing random number generatordone
<notice>exit status of (random isdn) is (0 0)
<notice>start services (network)
Setting up network interfaces:
    lo        done
    eth0      IP/Netmask: 192.168.0.4 / 255.255.255.0  done
    eth1      IP/Netmask: 192.168.0.99 / 255.255.255.0  /etc/sysconfig/network/scripts/ifup-route: line 160: route-stack-number: No such file or directory
done
    dsl0      manual
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=19 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (hotplug)
Starting hotplugging services [ ieee1394 net pci usb .. ]done
<notice>exit status of (hotplug) is (0)
<notice>start services (resmgr)
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=21 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>exit status of (resmgr) is (0)
<notice>start services (splash_early portmap)
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=22 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>exit status of (splash_early portmap) is (0 0)
<notice>start services (smbfs)
Mount SMB File System unused
<notice>exit status of (smbfs) is (6)
<notice>start services (sshd fbset alsasound acpid)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Loading ACPI modules (ac battery button fan processor thermal ) done
Starting acpid done
Starting sound driver:  intel8x0done
Restoring the previous sound settingdone
<notice>exit status of (sshd fbset alsasound acpid) is (0 0 0 0)
<notice>start services (splash kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Stop Unicode mode
doneLoading console font lat1-16.psfu  -m none (B
done<notice>exit status of (splash kbd cups) is (0 0 0)
<notice>start services (smpppd postfix hwscan)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=32 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
Starting mail service (Postfix)done
<notice>exit status of (smpppd postfix hwscan) is (0 0 0)
<notice>start services (xdm)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=35 INIT_VERSION=sysvinit-2.82 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=en_US PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=en_US splash=silent sscripts=40 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm) is (0)
<notice>start services (apache2)
Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh get_module_list_done=true progress=36 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 get_includes_done=true PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
done
<notice>exit status of (apache2) is (0)
<notice>start services (nscd dhcpd cron)
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting DHCP server <notice>startproc: execve (/usr/sbin/dhcpd) [ /usr/sbin/dhcpd -chroot /var/lib/dhcp/ -lf /dhcpd.leases -user nobody -group nogroup eth0 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=37 INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=silent sscripts=40 _=/sbin/startproc DAEMON=/usr/sbin/dhcpd ]
[chroot]done
<notice>exit status of (nscd dhcpd cron) is (0 0 0)
<notice>start services (splash_late)
<notice>exit status of (splash_late) is (0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(498,3)

[-- Attachment #3: Linux-Boot-Msg-22Jul2004-2119h.rtf --]
[-- Type: application/msword, Size: 28298 bytes --]