From: Chris Kogelnik <kogelnik@decru.com>
To: linux-smp@vger.kernel.org
Subject: unexpected IO-APIC
Date: Wed, 05 Jun 2002 20:38:00 -0700 [thread overview]
Message-ID: <3CFED918.41023D41@decru.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 98 bytes --]
I saw this message in /var/log/dmesg
Let me know if you need any more information.
Thanks.
Chris
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 11131 bytes --]
Linux version 2.4.3-12smp (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #1 SMP Fri Jun 8 14:38:50 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff77000 (usable)
BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS)
BIOS-e820: 000000001ff79000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
hm, page 00001000 reserved twice.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 00100000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 130935
zone(0): 4096 pages.
zone(1): 126839 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: WS 530 APIC at: 0xFEE00000
Processor #0 Pentium 4(tm) APIC version 20
Processor #1 Pentium 4(tm) APIC version 20
I/O APIC #2 Version 32 at 0xFEC00000.
Processors: 2
Kernel command line: auto BOOT_IMAGE=linux ro root=801 BOOT_FILE=/boot/vmlinuz-2.4.3-12smp hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1694.882 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 507772k/523740k available (1337k kernel code, 11496k reserved, 104k data, 252k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 1700MHz stepping 0a
per-CPU timeslice cutoff: 731.73 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3381.65 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 1700MHz stepping 0a
Total of 2 processors activated (6763.31 BogoMIPS).
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-13 not connected.
..TIMER: vector=49 pin1=2 pin2=0
number of MP IRQ sources: 44.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 003 03 0 0 0 0 0 1 1 91
0f 003 03 0 0 0 0 0 1 1 99
10 003 03 1 1 0 1 0 1 1 A1
11 003 03 1 1 0 1 0 1 1 A9
12 003 03 1 1 0 1 0 1 1 B1
13 003 03 1 1 0 1 0 1 1 B9
14 003 03 1 1 0 1 0 1 1 C1
15 003 03 1 1 0 1 0 1 1 C9
16 003 03 1 1 0 1 0 1 1 D1
17 003 03 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1694.8714 MHz.
..... host bus clock speed is 99.6982 MHz.
cpu: 0, clocks: 996982, slice: 332327
CPU0<T0:996976,T1:664640,D:9,S:332327,C:996982>
cpu: 1, clocks: 996982, slice: 332327
CPU1<T0:996976,T1:332320,D:2,S:332327,C:996982>
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfbe8e, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P2) -> 23
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B3,I14,P0) -> 22
PCI->APIC IRQ transform: (B4,I11,P0) -> 23
PCI->APIC IRQ transform: (B4,I12,P0) -> 16
PCI->APIC IRQ transform: (B4,I13,P0) -> 17
got res[fe400000:fe400fff] for resource 0 of Intel Corporation 82806AA PCI64 Hub Advanced Programmable Interrupt Controller
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
apm: disabled - APM is not SMP safe.
Starting kswapd v1.8
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
block: queued sectors max/low 337197kB/206125kB, 1024 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 4
PIIX4: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hdc: _NEC CD-RW NR-7800A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 355k freed
Serial driver version 5.05a (2001-03-20) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 3/14/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
(scsi1) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 4/13/0
(scsi1) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 396 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
Vendor: FUJITSU Model: MAN3184MP Rev: 5505
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:0:0) Synchronous at 160.0 Mbyte/sec, offset 127.
SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=3
Trying to unmount old root ... okay
Freeing unused kernel memory: 252k freed
Adding Swap: 1052216k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 14:56:08 Jun 8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 23
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
scsi2 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: NR-7800A Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
next reply other threads:[~2002-06-06 3:38 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-06 3:38 Chris Kogelnik [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-06 20:37 unexpected IO-APIC Danielle Hines
2006-07-07 13:12 ` Erik Mouw
2006-03-07 4:19 Mimi Zhou
2005-07-12 13:56 Unexpected IO-APIC Bill Baker
2005-07-12 16:42 ` randy_dunlap
2005-06-18 5:04 unexpected IO-APIC darshan
2005-05-26 8:44 Bernd Strebel
2005-05-27 5:33 ` randy_dunlap
2005-05-27 9:26 ` Bernd Strebel
2005-05-27 17:30 ` randy_dunlap
2005-05-27 22:24 ` Bernd Strebel
2005-05-30 22:43 ` randy_dunlap
2005-03-14 20:48 Unexpected IO-APIC Iuri Wickert
2005-03-15 20:32 ` Randy.Dunlap
2005-03-05 21:48 Marco van Beek
2005-03-15 20:23 ` Randy.Dunlap
2005-02-28 23:34 unexpected IO-APIC Mike Farnam
2005-03-15 17:48 ` Randy.Dunlap
2005-03-15 20:14 ` Randy.Dunlap
2005-01-31 17:41 Gary Buckmaster
2005-01-25 18:23 Unexpected IO-APIC Martin Slovacek
2005-01-25 18:59 ` Earle Nietzel
2004-12-28 6:58 unexpected IO-APIC Paul
2004-12-06 4:23 unexpected io-apic Simon Story
2004-07-23 20:33 unexpected IO-APIC Thomas Schlag
2004-07-08 7:52 S.K.Goel
2004-06-23 11:44 Jörg Lübbert
2004-06-23 11:42 Jörg Lübbert
2004-06-18 18:15 Unexpected IO-APIC GIN (Garreth Jeremiah)
2004-04-23 8:28 unexpected IO-APIC Piers Lauder
2004-04-18 17:53 dpn22
2004-04-07 8:11 JKolk
2004-04-01 14:32 Ian Jenkinson
2004-02-24 15:07 Unexpected IO-APIC Lyle Worthington
2004-02-24 16:38 ` Randy.Dunlap
2004-02-24 18:03 ` Lyle Worthington
2004-02-24 18:31 ` Randy.Dunlap
2004-02-15 8:24 unexpected IO-APIC Massa Takeuti
2004-01-16 3:40 Polyhead
2004-01-11 8:53 Russ McCallister
2003-12-18 7:21 Matthew Blakley
2003-12-13 5:50 Sterling Chavis
2003-11-23 6:38 W M Brelsford
2003-11-20 3:09 Chris Johns
2003-11-12 21:16 A.J. Duijn
2003-10-16 17:44 Lance Davis
2003-09-25 15:09 Unexpected IO-APIC David van Hoose
2003-09-11 16:36 unexpected IO-APIC John Birck
2003-09-04 16:37 Michael Sorrentino
2003-09-04 19:35 ` Alan Cox
2003-09-04 4:19 Unexpected IO-APIC Jeremy Sylvestre
2003-09-01 12:31 Alfonso Abeger
2003-08-21 7:51 Grage, Sascha
2003-08-12 15:40 unexpected IO-APIC Tom Parker
2003-08-08 16:49 Christian Stein
2003-07-29 13:52 Schulman.Andrew
2003-07-17 15:09 Unexpected IO-APIC Joe Brown
2003-07-12 23:34 unexpected IO-APIC Toth Szabolcs
2003-07-13 4:09 ` Randy.Dunlap
2003-06-09 21:52 Unexpected IO-APIC Julian R. Coombes
2003-06-07 10:06 unexpected IO-APIC Toni Mueller
2003-06-07 17:40 ` Randy.Dunlap
2003-06-05 10:37 Mimmus
2003-06-05 14:42 ` Randy.Dunlap
2003-06-04 2:19 Greg Norris
2003-05-29 19:44 Jürgen Adler
2003-05-24 3:15 Brian Laflum
2003-05-23 3:57 Ben Osborne
2003-05-25 20:07 ` Alan Cox
2003-05-22 7:02 Anders Tor Westerberg
2003-04-22 6:41 Ilo Lorusso
2003-04-18 2:43 Phaedrus
2003-04-16 23:36 lk
2003-04-17 11:43 ` Earle R. Nietzel
2003-04-17 18:46 ` lk
2003-04-17 20:28 ` Randy.Dunlap
2003-04-17 22:52 ` lk
2003-04-17 23:14 ` Randy.Dunlap
2003-04-10 12:22 Unexpected IO-APIC Milan Kerslager
2003-03-31 19:35 unexpected IO-APIC Pascal Hofmann
2003-03-27 18:03 Dennis Lambe Jr.
2003-03-27 12:13 Jakub Zawierucha
2003-03-15 11:46 Peter Ruskin
2003-03-08 17:14 Scott Beck
2003-03-02 15:03 Lorant Dobos
2003-02-27 8:14 Nick Gaugler
2003-02-22 0:50 Peter Ruskin
2003-02-06 22:59 Philipp Berndt
2003-02-01 22:15 Luis Claudio Pérez Tato
2003-01-30 11:24 Joern Strassemeyer
2003-01-30 6:55 Andrew Egin
2003-01-18 16:48 Andy Igoshin
2003-01-10 10:04 frontal
2003-01-03 6:19 Chris
2002-12-28 10:32 Jonathan Araña Cruz
2002-12-27 8:53 Marc
2002-12-19 5:21 Carlos Madrid
2002-12-17 14:46 Christian Heimanns
2002-12-16 12:21 Unexpected IO-APIC Pasquale Federico Zema
2002-12-10 9:50 unexpected IO-APIC Juan Pedro Paredes
2002-12-06 4:41 Toni Cerdà
2002-12-02 11:30 huba
2002-11-28 23:22 Erik Meusel
2002-11-29 0:40 ` Alan Cox
2002-11-27 10:42 Nigbur, Rolf (IKK-Bundesverband)
2002-11-27 12:36 ` Alan Cox
2002-11-25 9:59 Vitor Dias da Silva
2002-11-23 0:15 Unexpected IO-APIC Mick
2002-11-22 7:33 dix.edv
2002-10-20 22:43 unexpected IO-APIC John Osswald
2002-10-03 19:12 Unexpected IO-APIC Alexander Tsibulsky
2002-09-16 13:54 unexpected IO-APIC Juergen Rose
2002-08-24 12:21 Unexpected IO-APIC David Brownell
2002-08-18 14:27 unexpected IO-APIC Kim Bisgaard
2002-07-26 21:42 Joseph S. Wigton
2002-07-19 16:15 Barry Gamblin
2002-07-06 19:59 Paul Parsons
2002-06-28 19:05 Unexpected IO-APIC Jawaid.Bazyar
2002-06-20 15:26 Andrew Ott
2002-06-17 4:03 unexpected IO-APIC Adam Powers
2002-06-15 1:25 Steve Keith
2002-06-01 18:52 Luigi Rosa
2002-06-01 19:59 ` Vladimir G. Ivanovic
2002-06-02 23:03 ` Randy.Dunlap
2002-05-31 12:43 Françoise Guilbault
2002-05-20 13:41 zoli
2002-05-20 14:31 ` Alan Cox
2002-05-03 23:00 unexpected io-apic Schroettner Robert
2002-05-03 8:10 unexpected IO-APIC Giulio Bottazzi
2002-04-09 18:52 Mauricio Girardi
2002-04-08 9:31 Paul Hemstock
2002-04-08 14:46 ` Randy.Dunlap
2001-09-03 10:30 Matt Bernstein
2000-12-19 17:37 Mathieu Chouquet-Stringer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3CFED918.41023D41@decru.com \
--to=kogelnik@decru.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.