From: peterz@infradead.org (Peter Zijlstra)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/11] sched: move cfs task on a CPU with higher capacity
Date: Fri, 30 May 2014 08:29:37 +0200 [thread overview]
Message-ID: <20140530062937.GA11096@twins.programming.kicks-ass.net> (raw)
In-Reply-To: <CAKfTPtCHhxyugMOCeS0hZoEXWhgRec4uOBexZ2aB2A+Eycgi8w@mail.gmail.com>
On Thu, May 29, 2014 at 09:37:39PM +0200, Vincent Guittot wrote:
> On 29 May 2014 11:50, Peter Zijlstra <peterz@infradead.org> wrote:
> > On Fri, May 23, 2014 at 05:53:04PM +0200, Vincent Guittot wrote:
> >> If the CPU is used for handling lot of IRQs, trig a load balance to check if
> >> it's worth moving its tasks on another CPU that has more capacity
> >>
> >> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> >> ---
> >> kernel/sched/fair.c | 13 +++++++++++++
> >> 1 file changed, 13 insertions(+)
> >>
> >> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> >> index e8a30f9..2501e49 100644
> >> --- a/kernel/sched/fair.c
> >> +++ b/kernel/sched/fair.c
> >> @@ -5948,6 +5948,13 @@ static bool update_sd_pick_busiest(struct lb_env *env,
> >> if (sgs->sum_nr_running > sgs->group_capacity)
> >> return true;
> >>
> >> + /*
> >> + * The group capacity is reduced probably because of activity from other
> >> + * sched class or interrupts which use part of the available capacity
> >> + */
> >> + if ((sg->sgp->power_orig * 100) > (sgs->group_power * env->sd->imbalance_pct))
> >> + return true;
> >> +
> >> if (sgs->group_imb)
> >> return true;
> >>
> >
> > But we should already do this because the load numbers are scaled with
> > the power/capacity figures. If one CPU gets significant less time to run
> > fair tasks, its effective load would spike and it'd get to be selected
> > here anyway.
> >
> > Or am I missing something?
>
> The CPU could have been picked when the capacity becomes null (which
> occurred when the cpu_power goes below half the default
> SCHED_POWER_SCALE). And even after that, there were some conditions in
> find_busiest_group that was bypassing this busiest group
Could you detail those conditions? FWIW those make excellent Changelog
material.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140530/b71e5088/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Peter Zijlstra <peterz@infradead.org>
To: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Russell King - ARM Linux <linux@arm.linux.org.uk>,
LAK <linux-arm-kernel@lists.infradead.org>,
Preeti U Murthy <preeti@linux.vnet.ibm.com>,
Morten Rasmussen <Morten.Rasmussen@arm.com>,
Mike Galbraith <efault@gmx.de>,
Nicolas Pitre <nicolas.pitre@linaro.org>,
"linaro-kernel@lists.linaro.org" <linaro-kernel@lists.linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Subject: Re: [PATCH v2 10/11] sched: move cfs task on a CPU with higher capacity
Date: Fri, 30 May 2014 08:29:37 +0200 [thread overview]
Message-ID: <20140530062937.GA11096@twins.programming.kicks-ass.net> (raw)
In-Reply-To: <CAKfTPtCHhxyugMOCeS0hZoEXWhgRec4uOBexZ2aB2A+Eycgi8w@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1923 bytes --]
On Thu, May 29, 2014 at 09:37:39PM +0200, Vincent Guittot wrote:
> On 29 May 2014 11:50, Peter Zijlstra <peterz@infradead.org> wrote:
> > On Fri, May 23, 2014 at 05:53:04PM +0200, Vincent Guittot wrote:
> >> If the CPU is used for handling lot of IRQs, trig a load balance to check if
> >> it's worth moving its tasks on another CPU that has more capacity
> >>
> >> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> >> ---
> >> kernel/sched/fair.c | 13 +++++++++++++
> >> 1 file changed, 13 insertions(+)
> >>
> >> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> >> index e8a30f9..2501e49 100644
> >> --- a/kernel/sched/fair.c
> >> +++ b/kernel/sched/fair.c
> >> @@ -5948,6 +5948,13 @@ static bool update_sd_pick_busiest(struct lb_env *env,
> >> if (sgs->sum_nr_running > sgs->group_capacity)
> >> return true;
> >>
> >> + /*
> >> + * The group capacity is reduced probably because of activity from other
> >> + * sched class or interrupts which use part of the available capacity
> >> + */
> >> + if ((sg->sgp->power_orig * 100) > (sgs->group_power * env->sd->imbalance_pct))
> >> + return true;
> >> +
> >> if (sgs->group_imb)
> >> return true;
> >>
> >
> > But we should already do this because the load numbers are scaled with
> > the power/capacity figures. If one CPU gets significant less time to run
> > fair tasks, its effective load would spike and it'd get to be selected
> > here anyway.
> >
> > Or am I missing something?
>
> The CPU could have been picked when the capacity becomes null (which
> occurred when the cpu_power goes below half the default
> SCHED_POWER_SCALE). And even after that, there were some conditions in
> find_busiest_group that was bypassing this busiest group
Could you detail those conditions? FWIW those make excellent Changelog
material.
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2014-05-30 6:29 UTC|newest]
Thread overview: 216+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 15:52 [PATCH v2 00/11] sched: consolidation of cpu_power Vincent Guittot
2014-05-23 15:52 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 01/11] sched: fix imbalance flag reset Vincent Guittot
2014-05-23 15:52 ` Vincent Guittot
2014-05-25 10:33 ` Preeti U Murthy
2014-05-25 10:33 ` Preeti U Murthy
2014-05-26 7:49 ` Vincent Guittot
2014-05-26 7:49 ` Vincent Guittot
2014-05-26 9:16 ` Preeti U Murthy
2014-05-26 9:16 ` Preeti U Murthy
2014-05-26 10:14 ` Vincent Guittot
2014-05-26 10:14 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 02/11] sched: remove a wake_affine condition Vincent Guittot
2014-05-23 15:52 ` Vincent Guittot
2014-05-27 12:48 ` Peter Zijlstra
2014-05-27 12:48 ` Peter Zijlstra
2014-05-27 15:19 ` Vincent Guittot
2014-05-27 15:19 ` Vincent Guittot
2014-05-27 15:39 ` Peter Zijlstra
2014-05-27 15:39 ` Peter Zijlstra
2014-05-27 16:14 ` Vincent Guittot
2014-05-27 16:14 ` Vincent Guittot
2014-05-28 6:49 ` Vincent Guittot
2014-05-28 6:49 ` Vincent Guittot
2014-05-28 15:09 ` Dietmar Eggemann
2014-05-28 15:09 ` Dietmar Eggemann
2014-05-28 15:25 ` Vincent Guittot
2014-05-28 15:25 ` Vincent Guittot
2014-05-27 13:43 ` Peter Zijlstra
2014-05-27 13:43 ` Peter Zijlstra
2014-05-27 13:45 ` Peter Zijlstra
2014-05-27 13:45 ` Peter Zijlstra
2014-05-27 15:20 ` Vincent Guittot
2014-05-27 15:20 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 03/11] sched: fix avg_load computation Vincent Guittot
2014-05-23 15:52 ` Vincent Guittot
2014-05-27 13:48 ` Peter Zijlstra
2014-05-27 13:48 ` Peter Zijlstra
2014-05-23 15:52 ` [PATCH v2 04/11] sched: Allow all archs to set the power_orig Vincent Guittot
2014-05-23 15:52 ` Vincent Guittot
2014-05-30 14:04 ` Dietmar Eggemann
2014-05-30 14:04 ` Dietmar Eggemann
2014-05-30 14:46 ` Peter Zijlstra
2014-05-30 14:46 ` Peter Zijlstra
2014-05-30 20:50 ` Vincent Guittot
2014-05-30 20:50 ` Vincent Guittot
2014-06-04 9:42 ` Dietmar Eggemann
2014-06-04 9:42 ` Dietmar Eggemann
2014-06-04 11:15 ` Vincent Guittot
2014-06-04 11:15 ` Vincent Guittot
2014-06-05 8:59 ` Dietmar Eggemann
2014-06-05 8:59 ` Dietmar Eggemann
2014-06-16 9:01 ` Vincent Guittot
2014-06-16 9:01 ` Vincent Guittot
2014-06-03 13:22 ` Morten Rasmussen
2014-06-03 13:22 ` Morten Rasmussen
2014-06-03 14:02 ` Vincent Guittot
2014-06-03 14:02 ` Vincent Guittot
2014-06-04 11:17 ` Morten Rasmussen
2014-06-04 11:17 ` Morten Rasmussen
2014-06-06 7:01 ` Vincent Guittot
2014-06-06 7:01 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 05/11] ARM: topology: use new cpu_power interface Vincent Guittot
2014-05-23 15:52 ` Vincent Guittot
2014-05-25 13:22 ` Preeti U Murthy
2014-05-25 13:22 ` Preeti U Murthy
2014-05-26 8:25 ` Vincent Guittot
2014-05-26 8:25 ` Vincent Guittot
2014-05-26 9:19 ` Preeti U Murthy
2014-05-26 9:19 ` Preeti U Murthy
2014-05-23 15:53 ` [PATCH v2 06/11] sched: add per rq cpu_power_orig Vincent Guittot
2014-05-23 15:53 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 07/11] Revert "sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED" Vincent Guittot
2014-05-23 15:53 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 08/11] sched: get CPU's activity statistic Vincent Guittot
2014-05-23 15:53 ` Vincent Guittot
2014-05-27 17:32 ` Peter Zijlstra
2014-05-27 17:32 ` Peter Zijlstra
2014-05-28 7:01 ` Vincent Guittot
2014-05-28 7:01 ` Vincent Guittot
2014-05-28 12:10 ` Morten Rasmussen
2014-05-28 12:10 ` Morten Rasmussen
2014-05-28 13:15 ` Vincent Guittot
2014-05-28 13:15 ` Vincent Guittot
2014-05-28 15:47 ` Morten Rasmussen
2014-05-28 15:47 ` Morten Rasmussen
2014-05-28 16:39 ` Vincent Guittot
2014-05-28 16:39 ` Vincent Guittot
2014-06-03 12:03 ` Morten Rasmussen
2014-06-03 12:03 ` Morten Rasmussen
2014-06-03 15:59 ` Peter Zijlstra
2014-06-03 15:59 ` Peter Zijlstra
2014-06-03 17:41 ` Morten Rasmussen
2014-06-03 17:41 ` Morten Rasmussen
2014-06-03 15:50 ` Peter Zijlstra
2014-06-03 15:50 ` Peter Zijlstra
2014-06-03 17:20 ` Morten Rasmussen
2014-06-03 17:20 ` Morten Rasmussen
2014-06-04 7:47 ` Vincent Guittot
2014-06-04 7:47 ` Vincent Guittot
2014-06-04 8:08 ` Peter Zijlstra
2014-06-04 8:08 ` Peter Zijlstra
2014-06-04 8:55 ` Morten Rasmussen
2014-06-04 8:55 ` Morten Rasmussen
2014-06-04 9:23 ` Peter Zijlstra
2014-06-04 9:23 ` Peter Zijlstra
2014-06-04 9:35 ` Vincent Guittot
2014-06-04 9:35 ` Vincent Guittot
2014-06-04 10:25 ` Morten Rasmussen
2014-06-04 10:25 ` Morten Rasmussen
2014-06-04 9:44 ` Morten Rasmussen
2014-06-04 9:44 ` Morten Rasmussen
2014-06-04 9:32 ` Vincent Guittot
2014-06-04 9:32 ` Vincent Guittot
2014-06-04 10:00 ` Morten Rasmussen
2014-06-04 10:00 ` Morten Rasmussen
2014-06-04 10:17 ` Peter Zijlstra
2014-06-04 10:17 ` Peter Zijlstra
2014-06-04 10:36 ` Morten Rasmussen
2014-06-04 10:36 ` Morten Rasmussen
2014-06-04 10:55 ` Peter Zijlstra
2014-06-04 10:55 ` Peter Zijlstra
2014-06-04 11:07 ` Vincent Guittot
2014-06-04 11:07 ` Vincent Guittot
2014-06-04 11:23 ` Morten Rasmussen
2014-06-04 11:23 ` Morten Rasmussen
2014-06-04 11:52 ` Vincent Guittot
2014-06-04 11:52 ` Vincent Guittot
2014-06-04 13:09 ` Morten Rasmussen
2014-06-04 13:09 ` Morten Rasmussen
2014-06-04 13:23 ` Morten Rasmussen
2014-06-04 13:23 ` Morten Rasmussen
2014-05-28 15:17 ` Peter Zijlstra
2014-05-28 15:17 ` Peter Zijlstra
2014-06-03 15:40 ` Peter Zijlstra
2014-06-03 15:40 ` Peter Zijlstra
2014-06-03 17:16 ` Morten Rasmussen
2014-06-03 17:16 ` Morten Rasmussen
2014-06-03 17:37 ` Peter Zijlstra
2014-06-03 17:37 ` Peter Zijlstra
2014-06-03 17:39 ` Peter Zijlstra
2014-06-03 17:39 ` Peter Zijlstra
2014-06-03 23:11 ` Yuyang Du
2014-06-03 23:11 ` Yuyang Du
2014-05-30 9:50 ` Dietmar Eggemann
2014-05-30 9:50 ` Dietmar Eggemann
2014-05-30 19:20 ` Vincent Guittot
2014-05-30 19:20 ` Vincent Guittot
2014-06-01 11:33 ` Dietmar Eggemann
2014-06-01 11:33 ` Dietmar Eggemann
2014-06-02 14:07 ` Vincent Guittot
2014-06-02 14:07 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 09/11] sched: test the cpu's capacity in wake affine Vincent Guittot
2014-05-23 15:53 ` Vincent Guittot
2014-05-28 10:58 ` Peter Zijlstra
2014-05-28 10:58 ` Peter Zijlstra
2014-05-28 11:15 ` Vincent Guittot
2014-05-28 11:15 ` Vincent Guittot
2014-11-24 0:34 ` Wanpeng Li
2014-11-24 0:34 ` Wanpeng Li
2014-11-24 13:23 ` Vincent Guittot
2014-11-24 13:23 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 10/11] sched: move cfs task on a CPU with higher capacity Vincent Guittot
2014-05-23 15:53 ` Vincent Guittot
2014-05-29 9:50 ` Peter Zijlstra
2014-05-29 9:50 ` Peter Zijlstra
2014-05-29 19:37 ` Vincent Guittot
2014-05-29 19:37 ` Vincent Guittot
2014-05-30 6:29 ` Peter Zijlstra [this message]
2014-05-30 6:29 ` Peter Zijlstra
2014-05-30 20:05 ` Vincent Guittot
2014-05-30 20:05 ` Vincent Guittot
2014-06-02 17:06 ` Vincent Guittot
2014-06-02 17:06 ` Vincent Guittot
2014-06-03 11:15 ` Peter Zijlstra
2014-06-03 11:15 ` Peter Zijlstra
2014-06-03 12:31 ` Vincent Guittot
2014-06-03 12:31 ` Vincent Guittot
2014-05-29 14:04 ` Peter Zijlstra
2014-05-29 14:04 ` Peter Zijlstra
2014-05-29 19:44 ` Vincent Guittot
2014-05-29 19:44 ` Vincent Guittot
2014-05-30 13:26 ` Dietmar Eggemann
2014-05-30 13:26 ` Dietmar Eggemann
2014-05-30 19:24 ` Vincent Guittot
2014-05-30 19:24 ` Vincent Guittot
2014-05-30 19:45 ` Nicolas Pitre
2014-05-30 19:45 ` Nicolas Pitre
2014-05-30 20:07 ` Vincent Guittot
2014-05-30 20:07 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 11/11] sched: replace capacity by activity Vincent Guittot
2014-05-23 15:53 ` Vincent Guittot
2014-05-29 13:55 ` Peter Zijlstra
2014-05-29 13:55 ` Peter Zijlstra
2014-05-29 19:51 ` Vincent Guittot
2014-05-29 19:51 ` Vincent Guittot
2014-06-02 6:21 ` Preeti U Murthy
2014-06-02 6:21 ` Preeti U Murthy
2014-06-03 9:50 ` Vincent Guittot
2014-06-03 9:50 ` Vincent Guittot
2014-05-29 14:02 ` Peter Zijlstra
2014-05-29 14:02 ` Peter Zijlstra
2014-05-29 19:56 ` Vincent Guittot
2014-05-29 19:56 ` Vincent Guittot
2014-05-30 6:34 ` Peter Zijlstra
2014-05-30 6:34 ` Peter Zijlstra
2014-05-30 19:13 ` Vincent Guittot
2014-05-30 19:13 ` Vincent Guittot
2014-05-26 9:44 ` [PATCH v2 00/11] sched: consolidation of cpu_power Preeti U Murthy
2014-05-26 9:44 ` Preeti U Murthy
2014-05-26 10:04 ` Vincent Guittot
2014-05-26 10:04 ` Vincent Guittot
2014-05-26 15:54 ` Vincent Guittot
2014-05-26 15:54 ` Vincent Guittot
2014-05-27 5:47 ` Preeti U Murthy
2014-05-27 5:47 ` Preeti U Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140530062937.GA11096@twins.programming.kicks-ass.net \
--to=peterz@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.