From: "Clément Léger" <cleger@rivosinc.com>
To: Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: "Clément Léger" <cleger@rivosinc.com>,
"Atish Patra" <atishp@rivosinc.com>,
"Andrew Jones" <ajones@ventanamicro.com>,
"Evan Green" <evan@rivosinc.com>,
"Björn Topel" <bjorn@rivosinc.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
"Ron Minnich" <rminnich@gmail.com>,
"Daniel Maslowski" <cyrevolt@googlemail.com>
Subject: [PATCH 0/7] Add support to handle misaligned accesses in S-mode
Date: Tue, 26 Sep 2023 17:03:09 +0200 [thread overview]
Message-ID: <20230926150316.1129648-1-cleger@rivosinc.com> (raw)
Since commit 61cadb9 ("Provide new description of misaligned load/store
behavior compatible with privileged architecture.") in the RISC-V ISA
manual, it is stated that misaligned load/store might not be supported.
However, the RISC-V kernel uABI describes that misaligned accesses are
supported. In order to support that, this series adds support for S-mode
handling of misaligned accesses as well support for prctl(PR_UNALIGN).
Handling misaligned access in kernel allows for a finer grain control
of the misaligned accesses behavior, and thanks to the prctl call, can
allow disabling misaligned access emulation to generate SIGBUS. User
space can then optimize its software by removing such access based on
SIGBUS generation.
Currently, this series is useful for people that uses a SBI that does
not handled misaligned traps. In a near future, this series will make
use a SBI extension [1] allowing to request delegation of the
misaligned load/store traps to the S-mode software. This extension has
been submitted for review to the riscv tech-prs group. An OpenSBI
implementation for this spec is available at [2].
This series can be tested using the spike simulator [3] and an openSBI
version [4] which allows to always delegate misaligned load/store to
S-mode.
[1] https://lists.riscv.org/g/tech-prs/message/540
[2] https://github.com/rivosinc/opensbi/tree/dev/cleger/fw_feature_upstream
[3] https://github.com/riscv-software-src/riscv-isa-sim
[4] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned
Clément Léger (7):
riscv: remove unused functions in traps_misaligned.c
riscv: add support for misaligned handling in S-mode
riscv: report perf event for misaligned fault
riscv: add floating point insn support to misaligned access emulation
riscv: add support for sysctl unaligned_enabled control
riscv: report misaligned accesses emulation to hwprobe
riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN
arch/riscv/Kconfig | 1 +
arch/riscv/include/asm/cpufeature.h | 6 +
arch/riscv/include/asm/entry-common.h | 3 +
arch/riscv/include/asm/processor.h | 9 +
arch/riscv/kernel/Makefile | 2 +-
arch/riscv/kernel/cpufeature.c | 6 +-
arch/riscv/kernel/fpu.S | 117 ++++++++
arch/riscv/kernel/process.c | 18 ++
arch/riscv/kernel/setup.c | 1 +
arch/riscv/kernel/traps.c | 9 -
arch/riscv/kernel/traps_misaligned.c | 374 ++++++++++++++++++++++----
11 files changed, 488 insertions(+), 58 deletions(-)
--
2.40.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: "Clément Léger" <cleger@rivosinc.com>
To: Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: "Clément Léger" <cleger@rivosinc.com>,
"Atish Patra" <atishp@rivosinc.com>,
"Andrew Jones" <ajones@ventanamicro.com>,
"Evan Green" <evan@rivosinc.com>,
"Björn Topel" <bjorn@rivosinc.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
"Ron Minnich" <rminnich@gmail.com>,
"Daniel Maslowski" <cyrevolt@googlemail.com>
Subject: [PATCH 0/7] Add support to handle misaligned accesses in S-mode
Date: Tue, 26 Sep 2023 17:03:09 +0200 [thread overview]
Message-ID: <20230926150316.1129648-1-cleger@rivosinc.com> (raw)
Since commit 61cadb9 ("Provide new description of misaligned load/store
behavior compatible with privileged architecture.") in the RISC-V ISA
manual, it is stated that misaligned load/store might not be supported.
However, the RISC-V kernel uABI describes that misaligned accesses are
supported. In order to support that, this series adds support for S-mode
handling of misaligned accesses as well support for prctl(PR_UNALIGN).
Handling misaligned access in kernel allows for a finer grain control
of the misaligned accesses behavior, and thanks to the prctl call, can
allow disabling misaligned access emulation to generate SIGBUS. User
space can then optimize its software by removing such access based on
SIGBUS generation.
Currently, this series is useful for people that uses a SBI that does
not handled misaligned traps. In a near future, this series will make
use a SBI extension [1] allowing to request delegation of the
misaligned load/store traps to the S-mode software. This extension has
been submitted for review to the riscv tech-prs group. An OpenSBI
implementation for this spec is available at [2].
This series can be tested using the spike simulator [3] and an openSBI
version [4] which allows to always delegate misaligned load/store to
S-mode.
[1] https://lists.riscv.org/g/tech-prs/message/540
[2] https://github.com/rivosinc/opensbi/tree/dev/cleger/fw_feature_upstream
[3] https://github.com/riscv-software-src/riscv-isa-sim
[4] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned
Clément Léger (7):
riscv: remove unused functions in traps_misaligned.c
riscv: add support for misaligned handling in S-mode
riscv: report perf event for misaligned fault
riscv: add floating point insn support to misaligned access emulation
riscv: add support for sysctl unaligned_enabled control
riscv: report misaligned accesses emulation to hwprobe
riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN
arch/riscv/Kconfig | 1 +
arch/riscv/include/asm/cpufeature.h | 6 +
arch/riscv/include/asm/entry-common.h | 3 +
arch/riscv/include/asm/processor.h | 9 +
arch/riscv/kernel/Makefile | 2 +-
arch/riscv/kernel/cpufeature.c | 6 +-
arch/riscv/kernel/fpu.S | 117 ++++++++
arch/riscv/kernel/process.c | 18 ++
arch/riscv/kernel/setup.c | 1 +
arch/riscv/kernel/traps.c | 9 -
arch/riscv/kernel/traps_misaligned.c | 374 ++++++++++++++++++++++----
11 files changed, 488 insertions(+), 58 deletions(-)
--
2.40.1
next reply other threads:[~2023-09-26 15:04 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 15:03 Clément Léger [this message]
2023-09-26 15:03 ` [PATCH 0/7] Add support to handle misaligned accesses in S-mode Clément Léger
2023-09-26 15:03 ` [PATCH 1/7] riscv: remove unused functions in traps_misaligned.c Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 15:03 ` [PATCH 2/7] riscv: add support for misaligned handling in S-mode Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 15:03 ` [PATCH 3/7] riscv: report perf event for misaligned fault Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 15:03 ` [PATCH 4/7] riscv: add floating point insn support to misaligned access emulation Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 15:03 ` [PATCH 5/7] riscv: add support for sysctl unaligned_enabled control Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 15:03 ` [PATCH 6/7] riscv: report misaligned accesses emulation to hwprobe Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 21:57 ` Evan Green
2023-09-26 21:57 ` Evan Green
2023-09-28 7:46 ` Clément Léger
2023-09-28 7:46 ` Clément Léger
2023-09-28 16:51 ` Evan Green
2023-09-28 16:51 ` Evan Green
2023-10-03 9:50 ` Atish Kumar Patra
2023-10-03 9:50 ` Atish Kumar Patra
2023-09-29 1:02 ` kernel test robot
2023-09-29 1:02 ` kernel test robot
2023-09-26 15:03 ` [PATCH 7/7] riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN Clément Léger
2023-09-26 15:03 ` Clément Léger
2023-09-26 21:43 ` [PATCH 0/7] Add support to handle misaligned accesses in S-mode Evan Green
2023-09-26 21:43 ` Evan Green
2023-09-28 7:49 ` Clément Léger
2023-09-28 7:49 ` Clément Léger
2023-09-28 16:48 ` Evan Green
2023-09-28 16:48 ` Evan Green
2023-10-03 8:40 ` Atish Kumar Patra
2023-10-03 8:40 ` Atish Kumar Patra
2023-10-03 15:39 ` ron minnich
2023-10-03 15:39 ` ron minnich
2023-09-30 9:23 ` Conor Dooley
2023-09-30 9:23 ` Conor Dooley
2023-10-02 7:40 ` Clément Léger
2023-10-02 7:40 ` Clément Léger
2023-10-02 10:49 ` Conor Dooley
2023-10-02 10:49 ` Conor Dooley
2023-10-02 11:18 ` Clément Léger
2023-10-02 11:18 ` Clément Léger
2023-10-02 15:32 ` ron minnich
2023-10-02 15:32 ` ron minnich
2023-10-02 22:22 ` Jessica Clarke
2023-10-02 22:22 ` Jessica Clarke
2023-10-03 15:37 ` ron minnich
2023-10-03 15:37 ` ron minnich
2023-10-03 8:12 ` Clément Léger
2023-10-03 8:12 ` Clément Léger
2023-10-04 8:26 ` David Laight
2023-10-04 8:26 ` David Laight
2023-10-04 10:03 ` Clément Léger
2023-10-04 10:03 ` Clément Léger
2023-10-04 14:10 ` David Laight
2023-10-04 14:10 ` David Laight
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230926150316.1129648-1-cleger@rivosinc.com \
--to=cleger@rivosinc.com \
--cc=ajones@ventanamicro.com \
--cc=aou@eecs.berkeley.edu \
--cc=atishp@rivosinc.com \
--cc=bjorn@rivosinc.com \
--cc=cyrevolt@googlemail.com \
--cc=evan@rivosinc.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=rminnich@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.