From: David Matlack <dmatlack@google.com>
To: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Cc: Alex Williamson <alex@shazbot.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Jason Gunthorpe <jgg@nvidia.com>,
Josh Hilke <jrhilke@google.com>, Lukas Wunner <lukas@wunner.de>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
"Oliver O'Halloran" <oohall@gmail.com>,
Pasha Tatashin <pasha.tatashin@soleen.com>,
Pratyush Yadav <pratyush@kernel.org>,
Samiullah Khawaja <skhawaja@google.com>,
Vipin Sharma <vipinsh@google.com>,
David Matlack <dmatlack@google.com>
Subject: [PATCH 08/15] PCI/AER: Save AER state in the saved capability store
Date: Thu, 24 Sep 2026 17:34:54 +0000 [thread overview]
Message-ID: <20260924173501.856380-9-dmatlack@google.com> (raw)
In-Reply-To: <20260924173501.856380-1-dmatlack@google.com>
Save and restore the AER mask, severity, capability and root command
registers through the per-device saved capability store instead of a
private pci_cap_saved_state buffer.
Describe the registers in aer_saved_regs[] and drive the reservation, save,
and restore loops from it. Previously the three had to be kept in the same
order by hand, and pci_aer_init() encoded the register count as a bare 4 or
5.
Report a reservation failure. pci_aer_init() ignored the return value of
pci_add_ext_cap_save_buffer() entirely, so a failed allocation was only
noticed later as silently missing AER state.
No functional change intended.
Assisted-by: LLM
Signed-off-by: David Matlack <dmatlack@google.com>
---
drivers/pci/pcie/aer.c | 79 +++++++++++++++++++++---------------------
1 file changed, 40 insertions(+), 39 deletions(-)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index d8dcd238fda1..765899cf4046 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -352,53 +352,53 @@ int pci_aer_clear_status(struct pci_dev *dev)
return pci_aer_raw_clear_status(dev);
}
-void pci_save_aer_state(struct pci_dev *dev)
+/*
+ * AER registers saved and restored by the PCI core. PCI_ERR_ROOT_COMMAND is
+ * only implemented by Root Ports and Root Complex Event Collectors (PCIe
+ * r6.0, sec 7.8.4.9) and so must come last.
+ */
+static const u16 aer_saved_regs[] = {
+ PCI_ERR_UNCOR_MASK,
+ PCI_ERR_UNCOR_SEVER,
+ PCI_ERR_COR_MASK,
+ PCI_ERR_CAP,
+ PCI_ERR_ROOT_COMMAND,
+};
+
+static unsigned int aer_nr_saved_regs(struct pci_dev *dev)
{
- int aer = dev->aer_cap;
- struct pci_cap_saved_state *save_state;
- u32 *cap;
+ if (pcie_cap_has_rtctl(dev))
+ return ARRAY_SIZE(aer_saved_regs);
- if (!aer)
- return;
+ return ARRAY_SIZE(aer_saved_regs) - 1;
+}
+
+void pci_save_aer_state(struct pci_dev *dev)
+{
+ unsigned int i;
- save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_ERR);
- if (!save_state)
+ if (!dev->aer_cap)
return;
- cap = &save_state->cap.data[0];
- pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, cap++);
- pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, cap++);
- pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK, cap++);
- pci_read_config_dword(dev, aer + PCI_ERR_CAP, cap++);
- if (pcie_cap_has_rtctl(dev))
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, cap++);
+ for (i = 0; i < aer_nr_saved_regs(dev); i++)
+ pci_save_cap_dword(dev, dev->aer_cap + aer_saved_regs[i]);
}
void pci_restore_aer_state(struct pci_dev *dev)
{
- int aer = dev->aer_cap;
- struct pci_cap_saved_state *save_state;
- u32 *cap;
+ unsigned int i;
- if (!aer)
- return;
-
- save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_ERR);
- if (!save_state)
+ if (!dev->aer_cap)
return;
- cap = &save_state->cap.data[0];
- pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, *cap++);
- pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_SEVER, *cap++);
- pci_write_config_dword(dev, aer + PCI_ERR_COR_MASK, *cap++);
- pci_write_config_dword(dev, aer + PCI_ERR_CAP, *cap++);
- if (pcie_cap_has_rtctl(dev))
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, *cap++);
+ for (i = 0; i < aer_nr_saved_regs(dev); i++)
+ pci_restore_cap_dword(dev, dev->aer_cap + aer_saved_regs[i]);
}
void pci_aer_init(struct pci_dev *dev)
{
- int n;
+ unsigned int i;
+ int error;
dev->aer_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!dev->aer_cap)
@@ -415,14 +415,15 @@ void pci_aer_init(struct pci_dev *dev)
ratelimit_state_init(&dev->aer_info->nonfatal_ratelimit,
DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);
- /*
- * We save/restore PCI_ERR_UNCOR_MASK, PCI_ERR_UNCOR_SEVER,
- * PCI_ERR_COR_MASK, and PCI_ERR_CAP. Root and Root Complex Event
- * Collectors also implement PCI_ERR_ROOT_COMMAND (PCIe r6.0, sec
- * 7.8.4.9).
- */
- n = pcie_cap_has_rtctl(dev) ? 5 : 4;
- pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_ERR, sizeof(u32) * n);
+ for (i = 0; i < aer_nr_saved_regs(dev); i++) {
+ unsigned int off = dev->aer_cap + aer_saved_regs[i];
+
+ error = pci_reserve_saved_cap(dev, off, sizeof(u32));
+ if (error) {
+ pci_err(dev, "unable to reserve AER save state\n");
+ break;
+ }
+ }
/*
* Advisory Non-Fatal Errors are masked by default (PCIe r7.0, sec
--
2.56.0.rc1.315.gc6ed9934b7-goog
next prev parent reply other threads:[~2026-09-24 17:35 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 17:34 [PATCH 00/15] PCI: Index saved capability state by configuration space offset David Matlack
2026-09-24 17:34 ` [PATCH 01/15] PCI/DPC: Allocate the DPC save buffer during device setup David Matlack
2026-09-24 17:44 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 02/15] PCI: Add an offset-indexed store for saved capability registers David Matlack
2026-09-24 17:52 ` sashiko-bot
2026-10-06 18:41 ` Josh Hilke
2026-09-24 17:34 ` [PATCH 03/15] PCI: Lay out struct pci_saved_state by configuration space offset David Matlack
2026-09-24 18:01 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 04/15] PCI: Save PCIe state in the saved capability store David Matlack
2026-09-24 18:08 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 05/15] PCI: Save PCI-X " David Matlack
2026-09-24 18:11 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 06/15] PCI/ASPM: Save LTR " David Matlack
2026-09-24 18:16 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 07/15] PCI/ASPM: Save L1SS " David Matlack
2026-09-24 18:22 ` sashiko-bot
2026-10-06 18:41 ` Josh Hilke
2026-09-24 17:34 ` David Matlack [this message]
2026-09-24 18:26 ` [PATCH 08/15] PCI/AER: Save AER " sashiko-bot
2026-09-24 17:34 ` [PATCH 09/15] PCI/PTM: Save PTM " David Matlack
2026-09-24 18:30 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 10/15] PCI/TPH: Save TPH " David Matlack
2026-09-24 18:36 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 11/15] PCI/DPC: Save DPC " David Matlack
2026-09-24 18:40 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 12/15] PCI/VC: Split the VC Resource Control restore into a helper David Matlack
2026-09-24 18:42 ` sashiko-bot
2026-09-24 17:34 ` [PATCH 13/15] PCI/VC: Save VC state in the saved capability store David Matlack
2026-09-24 18:46 ` sashiko-bot
2026-10-06 18:42 ` Josh Hilke
2026-09-24 17:35 ` [PATCH 14/15] PCI: Save reserved capability registers in a single pass David Matlack
2026-09-24 18:56 ` sashiko-bot
2026-10-06 18:42 ` Josh Hilke
2026-09-24 17:35 ` [PATCH 15/15] PCI: Remove the per-capability save buffers David Matlack
2026-09-24 19:01 ` sashiko-bot
2026-10-06 18:42 ` Josh Hilke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260924173501.856380-9-dmatlack@google.com \
--to=dmatlack@google.com \
--cc=alex@shazbot.org \
--cc=bhelgaas@google.com \
--cc=jgg@nvidia.com \
--cc=jrhilke@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=oohall@gmail.com \
--cc=pasha.tatashin@soleen.com \
--cc=pratyush@kernel.org \
--cc=skhawaja@google.com \
--cc=vipinsh@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.