[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #209 from Jonathan Farrugia (jonfarr87@gmail.com) ---
(In reply to Denis Pauk from comment #205)
> Created attachment 300253 [details]
> Asus WMI for nct6775 v5.16 base (2022.01.11)
> 
> (In reply to Jonathan Farrugia from comment #204)
> > cat /sys/class/dmi/id/board_name 
> > PRIME B550M-A
> (In reply to Gregory P. Smith from comment #202)
> > The "Pro B550M-C" as mentioned in #c70 also appears to need to be in a
> list.
> > 
> > $ cat /sys/class/dmi/id/board_name 
> > Pro B550M-C
> > 
> >
> https://www.asus.com/us/Motherboards-Components/Motherboards/CSM/Pro-B550M-C-
> > CSM/
> 
> Could you check with updated patch?


Just tried the patch. The chip is being detected correctly and readings are the
same as with Kernel 5.14.21.

nct6798-isa-0290
Adapter: ISA adapter
in0:                       +0.39 V  (min =  +0.00 V, max =  +1.74 V)
in1:                       +1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                       +3.44 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                       +3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                       +1.05 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                       +1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                       +3.44 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                       +3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                       +0.92 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                      +0.52 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                      +0.52 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                      +1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                      +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                      +1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     1347 RPM  (min =    0 RPM)
fan2:                     1279 RPM  (min =    0 RPM)
fan3:                        0 RPM  (min =    0 RPM)
fan7:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +23.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
CPUTIN:                    +28.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:                   +25.5°C    sensor = thermistor
AUXTIN1:                   +23.0°C    sensor = thermistor
AUXTIN2:                   +23.0°C    sensor = thermistor
AUXTIN3:                   +26.0°C    sensor = thermistor
PECI Agent 0 Calibration:  +28.5°C  
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  
PCH_CHIP_TEMP:              +0.0°C  
PCH_CPU_TEMP:               +0.0°C  
intrusion0:               ALARM
intrusion1:               ALARM
beep_enable:              disabled


If I may ask, will this work be integrated into 5.16.x patches?

Thanks :)

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.