[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #118 from Kamil Dudka (kdudka@redhat.com) ---
Thanks!  I confirm the patch works for me with ASUS PRIME B360-PLUS and
linux-5.14.5 after adding the board on the white-list:

--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -4986,6 +4986,7 @@ static int __init nct6775_find(int sioaddr, struct
nct6775_sio_data *sio_data)
 static struct platform_device *pdev[2];

 static const char * const asus_wmi_boards[] = {
+   "PRIME B360-PLUS",
    "PRIME B460-PLUS",
    "ROG CROSSHAIR VIII DARK HERO",
    "ROG CROSSHAIR VIII HERO",


# sensors nct6796-isa-0290
nct6796-isa-0290
Adapter: ISA adapter
Vcore:                    376.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                        1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:                       3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+3.3V:                      3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                        1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                      144.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                      120.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                       3.46 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
Vbat:                       3.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                        1.05 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                     152.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                     128.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                     136.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                     120.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                     136.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     1073 RPM  (min =    0 RPM)
fan2:                     1214 RPM  (min =    0 RPM)
fan3:                        0 RPM  (min =    0 RPM)
fan4:                        0 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                        0 RPM  (min =    0 RPM)
fan7:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +28.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor =
thermistor
CPUTIN:                    +33.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:                  +111.0°C    sensor = thermistor
AUXTIN1:                  +118.0°C    sensor = thermistor
AUXTIN2:                  +117.0°C    sensor = thermistor
AUXTIN3:                  +118.0°C    sensor = thermistor
PECI Agent 0:              +37.0°C  (high = +98.0°C, hyst = +95.0°C)
                                    (crit = +100.0°C)
PECI Agent 0 Calibration:  +32.0°C  
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  
PCH_CHIP_TEMP:              +0.0°C  
intrusion0:               ALARM
intrusion1:               ALARM
beep_enable:              disabled

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.