[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

Nick Owens (mischief@offblast.org) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |mischief@offblast.org

--- Comment #302 from Nick Owens (mischief@offblast.org) ---
Created attachment 303833
  --> https://bugzilla.kernel.org/attachment.cgi?id=303833&action=edit
proart-x670e-dmi.patch

hi denis,

i've tested patch for 6.1.8
(https://bugzilla.kernel.org/show_bug.cgi?id=204807#c290) against gentoo 6.1.12
kernel on ProArt X670E-CREATOR WIFI. seems to work ok.

i attached a patch to put this board in asus_wmi_info_table, as this also
appears to make the module load automatically with a modalias. for the mutex, i
checked my DSDT and acpi_board_SBRG_MUTEX seems to exist there, but i am very
much a novice in kernel programming so i am unsure if this is correct. if it
helps i can attach my DSDT for this board.

i would very much like for this to be included in a future kernel, so if i can
help further let me know.

here is my sensor reading.

mischief@beast:~ $ dmesg|grep nct6775
[    6.678325] nct6775: Found NCT6799D or compatible chip at 0x2e:0x290
mischief@beast:~ $ sensors nct6799-*
nct6799-isa-0290
Adapter: ISA adapter
in0:                        1.34 V  (min =  +0.00 V, max =  +1.74 V)
in1:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                        3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                        3.31 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                        1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                        1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                        1.15 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                        3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                        3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                        1.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                     528.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                     528.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                       1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                       1.28 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                       1.23 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                        0 RPM  (min =    0 RPM)
fan2:                      849 RPM  (min =    0 RPM)
fan3:                      841 RPM  (min =    0 RPM)
fan4:                        0 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                        0 RPM  (min =    0 RPM)
fan7:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +37.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
CPUTIN:                    +41.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:                   +18.0°C    sensor = thermistor
AUXTIN1:                   +23.0°C    sensor = thermistor
AUXTIN2:                   +23.0°C    sensor = thermistor
AUXTIN3:                   +14.0°C    sensor = thermistor
PECI Agent 0 Calibration:  +41.5°C  
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  
PCH_CHIP_TEMP:              +0.0°C  
PCH_CPU_TEMP:               +0.0°C  
TSI0_TEMP:                 +50.5°C  
intrusion0:               OK
intrusion1:               ALARM
beep_enable:              disabled

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.