[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #112 from sefoci9222@rerunway.com ---

please add:


cat /sys/class/dmi/id/board_name

ROG STRIX X570-F GAMING


can confirm latest debug.diff is working, many thanks:


Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `nct6775':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT6798D Super IO Sensors' (confidence: 9)

Driver `k10temp' (autoloaded):
  * Chip `AMD Family 17h thermal sensors' (confidence: 9)

Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): 
Unloading i2c-dev... OK

-

Sep 15 01:55:35 desk kernel: nct6775: Using Asus WMI to access 0xc1 chip.
Sep 15 01:55:35 desk kernel: nct6775: Found NCT6798D or compatible chip at
0x2e:0x290

Sep 15 02:02:41 desk systemd[1]: Starting Hardware Monitoring Sensors...
Sep 15 02:02:41 desk kernel: nct6775: Using Asus WMI to access 0xc1 chip.
Sep 15 02:02:41 desk kernel: nct6775: Found NCT6798D or compatible chip at
0x2e:0x290
Sep 15 02:02:41 desk systemd[1]: Finished Hardware Monitoring Sensors.

-

[root@desk testM]# sensors
amdgpu-pci-0700
Adapter: PCI adapter
vddgfx:      950.00 mV 
fan1:         835 RPM  (min =    0 RPM, max = 3200 RPM)
edge:         +39.0°C  (crit = +91.0°C, hyst = -273.1°C)
power1:       44.15 W  (cap = 277.00 W)

nct6798-isa-0290
Adapter: ISA adapter
in0:                      888.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                      992.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                        3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                        3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                        1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                      960.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                      256.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                        3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                        3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                      904.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                     480.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                     496.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                       1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                     344.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                     256.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                      678 RPM  (min =    0 RPM)
fan2:                      575 RPM  (min =    0 RPM)
fan3:                     1050 RPM  (min =    0 RPM)
fan4:                      738 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +28.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
CPUTIN:                    +33.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:                   +86.0°C    sensor = thermistor
AUXTIN1:                   +28.0°C    sensor = thermistor
AUXTIN2:                   +26.0°C    sensor = thermistor
AUXTIN3:                   +91.0°C    sensor = thermistor
PECI Agent 0 Calibration:  +33.5°C  
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  
PCH_CHIP_TEMP:              +0.0°C  
PCH_CPU_TEMP:               +0.0°C  
intrusion0:               ALARM
intrusion1:               ALARM
beep_enable:              disabled

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +32.6°C  
Tdie:         +32.6°C  
Tccd1:        +39.5°C

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.