[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #190 from Mikhail (mikhail.v.gavrilov@gmail.com) ---
Created attachment 299921
  --> https://bugzilla.kernel.org/attachment.cgi?id=299921&action=edit
Photo of FANs indication in BIOS (ROG STRIX X570-I GAMING) (

(In reply to Denis Pauk from comment #186)
> Patch is based on stable v5.15 kernel version. Could you check with v5.15
> kernel version from kernel.org.

Thanks, I beginning see CPU FAN RPM.

$ sensors
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +55.0°C  

amdgpu-pci-0b00
Adapter: PCI adapter
vddgfx:      775.00 mV 
fan1:           0 RPM  (min =    0 RPM, max = 3300 RPM)
edge:         +52.0°C  (crit = +100.0°C, hyst = -273.1°C)
                       (emerg = +105.0°C)
junction:     +54.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
mem:          +56.0°C  (crit = +100.0°C, hyst = -273.1°C)
                       (emerg = +105.0°C)
power1:       15.00 W  (cap = 255.00 W)

nvme-pci-0100
Adapter: PCI adapter
Composite:    +52.9°C  

hidpp_battery_0-hid-3-9
Adapter: HID adapter
in0:           4.06 V  

nct6798-isa-0290
Adapter: ISA adapter
in0:                      976.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                        3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                        3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                      992.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                      656.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                      424.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                        3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                        3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                      912.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                     328.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                     544.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                       1.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                     464.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                     368.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                        0 RPM  (min =    0 RPM)
fan2:                      847 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan7:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +46.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
CPUTIN:                    +48.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:                   +66.5°C    sensor = thermistor
AUXTIN1:                   +46.0°C    sensor = thermistor
AUXTIN2:                   +21.0°C    sensor = thermistor
AUXTIN3:                   +67.0°C    sensor = thermistor
PECI Agent 0 Calibration:  +53.0°C  
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C  
PCH_CHIP_TEMP:              +0.0°C  
PCH_CPU_TEMP:               +0.0°C  
intrusion0:               ALARM
intrusion1:               ALARM
beep_enable:              disabled

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +63.4°C  
Tccd1:        +53.8°C  
Tccd2:        +48.0°C  

ucsi_source_psy_0_00081-i2c-0-08
Adapter: Synopsys DesignWare I2C adapter
in0:           0.00 V  (min =  +0.00 V, max =  +0.00 V)
curr1:         0.00 A  (max =  +0.00 A)

For unknown reason  RPM of PCH FAN and RPM of HS FAN which displayed in BIOS
didn't reading by driver. It's normal?

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.