[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

--- Comment #200 from Vladdrako (vladdrako007@gmail.com) ---
(In reply to Denis Pauk from comment #199)
> Could check with updated patch?

Works fine.

sudo dmesg | grep wmi
[    7.943237] asus_wmi: ASUS WMI generic driver loaded
[    8.052769] asus_wmi: Initialization: 0x0
[    8.052805] asus_wmi: BIOS WMI version: 0.9
[    8.052863] asus_wmi: SFUN value: 0x0
[    8.052866] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    8.053621] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input13
sudo dmesg | grep nct6775
[    8.074613] nct6775: Can't read chip ID by Asus WMI.
[    8.074982] nct6775: Using Asus WMI mutex: \_SB_.PCI0.LPCB.SIO1.MUT0
[    8.075014] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[    8.075056] nct6775: i2c have not found
sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +37.0°C  (high = +80.0°C, crit = +99.0°C)
Core 0:        +37.0°C  (high = +80.0°C, crit = +99.0°C)
Core 1:        +36.0°C  (high = +80.0°C, crit = +99.0°C)
Core 2:        +37.0°C  (high = +80.0°C, crit = +99.0°C)
Core 3:        +31.0°C  (high = +80.0°C, crit = +99.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

nct6776-isa-0290
Adapter: ISA adapter
Vcore:         944.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:             1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:            3.41 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:           3.41 V  (min =  +2.98 V, max =  +3.63 V)
in4:             1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:             2.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:           832.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:            3.42 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:            3.38 V  (min =  +2.70 V, max =  +3.63 V)
fan1:             0 RPM  (min =    0 RPM)
fan2:           856 RPM  (min =    0 RPM)
fan3:             0 RPM  (min =    0 RPM)
fan4:             0 RPM  (min =    0 RPM)
fan5:             0 RPM  (min =    0 RPM)
SYSTIN:         +27.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor =
thermistor
CPUTIN:         +91.5°C  (high = +81.0°C, hyst = +76.0°C)  ALARM  sensor =
thermistor
AUXTIN:         +64.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
PECI Agent 0:   +36.0°C  (high = +80.0°C, hyst = +75.0°C)
                         (crit = +99.0°C)
PCH_CHIP_TEMP:   +0.0°C  
PCH_CPU_TEMP:    +0.0°C  
PCH_MCH_TEMP:    +0.0°C  
intrusion0:    ALARM
intrusion1:    ALARM
beep_enable:   disabled

nvme-pci-0200
Adapter: PCI adapter
Composite:    +25.9°C  (low  =  -0.1°C, high = +69.8°C)
                       (crit = +84.8°C)
ERROR: Can't get value of subfeature temp2_min: I/O error
ERROR: Can't get value of subfeature temp2_max: I/O error
Sensor 1:     +37.9°C  (low  =  +0.0°C, high =  +0.0°C)

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.