[Bug 204807] Hardware monitoring sensor nct6798d doesn't work unless acpi_enforce_resources=lax is enabled

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=204807

Jeroen Beerstra (jeroen@beerstra.org) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |jeroen@beerstra.org

--- Comment #280 from Jeroen Beerstra (jeroen@beerstra.org) ---
(In reply to Denis Pauk from comment #278)

I was succesfull in enabling the monitoring for my Asus X670-P motherboard on
kernel 6.1.2 running on Almalinux. First of all I added my board to DMI section
of you r patch and second I added it to asus_wmi_sensors. The patch didn't
apply fully though on ML linux but manually editing nct6775-platform was
trivial for me (I just needed to add Asus X670-P to the list and didn't bother
to sort out the differences in the list from the patch and linux 6.1.2). I
still need to modprobe nct6775 and lmsensors doesn't detect my sensors OOTB.
But the module loads cleanly and I see sensors readings :)

nct6799-isa-0290
Adapter: ISA adapter
in0:                        1.21 V  (min =  +0.00 V, max =  +1.74 V)
in1:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                        3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                        3.34 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                        1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                        1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                      784.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                        3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                        3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                        1.67 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                     560.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                     552.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                       1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                     496.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                     424.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                      681 RPM  (min =    0 RPM)
fan2:                      512 RPM  (min =    0 RPM)
fan3:                      639 RPM  (min =    0 RPM)
fan7:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
CPUTIN:                    +34.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor =
thermistor
AUXTIN0:                   +38.0°C    sensor = thermistor
AUXTIN1:                   +19.0°C    sensor = thermistor
AUXTIN2:                   +20.0°C    sensor = thermistor
AUXTIN3:                   +73.0°C    sensor = thermistor
PECI Agent 0 Calibration:  +35.5°C
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C
PCH_CHIP_TEMP:              +0.0°C
PCH_CPU_TEMP:               +0.0°C
TSI0_TEMP:                 +46.4°C
intrusion0:               ALARM
intrusion1:               ALARM
beep_enable:              disabled

Not all is correct (for example one of the 2 case fans is missing from the
list) but at least I'm getting somewhere, thanx! :)

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.