Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Manasi Navare <manasi.d.navare@intel.com>,
	Anusha Srivatsa <anusha.srivatsa@intel.com>
Subject: [PATCH v8 14/19] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs
Date: Fri,  2 Nov 2018 14:31:33 -0700	[thread overview]
Message-ID: <20181102213138.301-15-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181102213138.301-1-manasi.d.navare@intel.com>

Infoframes are used to send secondary data packets. This patch
adds support for DSC Picture parameter set secondary data packets
in the existing write_infoframe helpers.

v3:
* Unused variables cleanup (Ville)
v2:
* Rebase on drm-tip (Manasi)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h   |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c | 21 +++++++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c0e6e14fe9fa..49c3c24965eb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4550,6 +4550,7 @@ enum {
  * of the infoframe structure specified by CEA-861. */
 #define   VIDEO_DIP_DATA_SIZE	32
 #define   VIDEO_DIP_VSC_DATA_SIZE	36
+#define   VIDEO_DIP_PPS_DATA_SIZE	132
 #define VIDEO_DIP_CTL		_MMIO(0x61170)
 /* Pre HSW: */
 #define   VIDEO_DIP_ENABLE		(1 << 31)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 0c587e4503e3..61867a6733a8 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -115,6 +115,8 @@ static u32 hsw_infoframe_enable(unsigned int type)
 	switch (type) {
 	case DP_SDP_VSC:
 		return VIDEO_DIP_ENABLE_VSC_HSW;
+	case DP_SDP_PPS:
+		return VDIP_ENABLE_PPS;
 	case HDMI_INFOFRAME_TYPE_AVI:
 		return VIDEO_DIP_ENABLE_AVI_HSW;
 	case HDMI_INFOFRAME_TYPE_SPD:
@@ -136,6 +138,8 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
 	switch (type) {
 	case DP_SDP_VSC:
 		return HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder, i);
+	case DP_SDP_PPS:
+		return ICL_VIDEO_DIP_PPS_DATA(cpu_transcoder, i);
 	case HDMI_INFOFRAME_TYPE_AVI:
 		return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i);
 	case HDMI_INFOFRAME_TYPE_SPD:
@@ -148,6 +152,18 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
 	}
 }
 
+static int hsw_dip_data_size(unsigned int type)
+{
+	switch (type) {
+	case DP_SDP_VSC:
+		return VIDEO_DIP_VSC_DATA_SIZE;
+	case DP_SDP_PPS:
+		return VIDEO_DIP_PPS_DATA_SIZE;
+	default:
+		return VIDEO_DIP_DATA_SIZE;
+	}
+}
+
 static void g4x_write_infoframe(struct intel_encoder *encoder,
 				const struct intel_crtc_state *crtc_state,
 				unsigned int type,
@@ -382,11 +398,12 @@ static void hsw_write_infoframe(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
 	i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
-	int data_size = type == DP_SDP_VSC ?
-		VIDEO_DIP_VSC_DATA_SIZE : VIDEO_DIP_DATA_SIZE;
+	int data_size;
 	int i;
 	u32 val = I915_READ(ctl_reg);
 
+	data_size = hsw_dip_data_size(type);
+
 	val &= ~hsw_infoframe_enable(type);
 	I915_WRITE(ctl_reg, val);
 
-- 
2.18.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2018-11-02 21:31 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-02 21:31 [PATCH v8 00/19] DSC enabling remaining patches respin Manasi Navare
2018-11-02 21:31 ` [PATCH v8 01/19] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-02 21:31 ` [PATCH v8 02/19] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-02 21:31 ` [PATCH v8 03/19] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-02 21:31 ` [PATCH v8 04/19] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-06  1:38   ` Srivatsa, Anusha
2018-11-06 20:17     ` Manasi Navare
2018-11-02 21:31 ` [PATCH v8 05/19] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-02 21:31 ` [PATCH v8 06/19] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-02 21:31 ` [PATCH v8 07/19] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-03  2:09   ` Manasi Navare
2018-11-06 14:42     ` Ville Syrjälä
2018-11-06 20:37       ` Manasi Navare
2018-11-07 22:31         ` Manasi Navare
2018-11-06 22:41       ` Srivatsa, Anusha
2018-11-06 22:48         ` Manasi Navare
2018-11-02 21:31 ` [PATCH v8 08/19] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-02 21:31 ` [PATCH v8 09/19] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-02 21:31 ` [PATCH v8 10/19] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-06 14:33   ` Ville Syrjälä
2018-11-06 16:52     ` Manasi Navare
2018-11-06 17:00       ` Ville Syrjälä
2018-11-06 20:14         ` Manasi Navare
2018-11-06 20:30           ` Ville Syrjälä
2018-11-02 21:31 ` [PATCH v8 11/19] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-02 21:31 ` [PATCH v8 12/19] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-02 21:31 ` [PATCH v8 13/19] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-06 14:36   ` Ville Syrjälä
2018-11-06 16:50     ` Manasi Navare
2018-11-02 21:31 ` Manasi Navare [this message]
2018-11-02 21:31 ` [PATCH v8 15/19] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-02 21:31 ` [PATCH v8 16/19] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-02 21:31 ` [PATCH v8 17/19] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-02 21:31 ` [PATCH v8 18/19] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-02 21:31 ` [PATCH v8 19/19] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-11-03  2:40   ` Manasi Navare
2018-11-02 21:51 ` ✗ Fi.CI.CHECKPATCH: warning for DSC enabling remaining patches respin Patchwork
2018-11-02 21:57 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-02 22:30 ` ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181102213138.301-15-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=anusha.srivatsa@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox