Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v8 17/19] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits
Date: Fri,  2 Nov 2018 14:31:36 -0700	[thread overview]
Message-ID: <20181102213138.301-18-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20181102213138.301-1-manasi.d.navare@intel.com>

1. Disable Left/right VDSC branch in DSS Ctrl reg
    depending on the number of VDSC engines being used
2. Disable joiner in DSS Ctrl reg

v4:
* Remove encoder, make crtc_state const (Ville)
v3 (From Manasi):
* Add Disable PG2 for VDSC on eDP
v2 (From Manasi):
* Use old_crtc_state to find dsc params
* Add a condition to disable only if
dsc state compression is enabled
* Use correct DSS CTL regs

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c |  2 ++
 drivers/gpu/drm/i915/intel_vdsc.c    | 32 ++++++++++++++++++++++++++++
 3 files changed, 35 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f347d0d7b9eb..c80c9a1af3d1 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3487,6 +3487,7 @@ extern bool intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
 				  bool enable);
 extern void intel_dsc_enable(struct intel_encoder *encoder,
 			     const struct intel_crtc_state *crtc_state);
+extern void intel_dsc_disable(const struct intel_crtc_state *crtc_state);
 
 int i915_reg_read_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d3aa77f4d606..cbeea906c531 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5848,6 +5848,8 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
 	if (!transcoder_is_dsi(cpu_transcoder))
 		intel_ddi_disable_transcoder_func(old_crtc_state);
 
+	intel_dsc_disable(old_crtc_state);
+
 	if (INTEL_GEN(dev_priv) >= 9)
 		skylake_scaler_disable(intel_crtc);
 	else
diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
index fae5193551d8..02102cd275fd 100644
--- a/drivers/gpu/drm/i915/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -1041,3 +1041,35 @@ void intel_dsc_enable(struct intel_encoder *encoder,
 
 	return;
 }
+
+void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum pipe pipe = crtc->pipe;
+	i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
+	u32 dss_ctl1_val = 0, dss_ctl2_val = 0;
+
+	if (!old_crtc_state->dsc_params.compression_enable)
+		return;
+
+	if (old_crtc_state->cpu_transcoder == TRANSCODER_EDP) {
+		dss_ctl1_reg = DSS_CTL1;
+		dss_ctl2_reg = DSS_CTL2;
+	} else {
+		dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
+		dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
+	}
+	dss_ctl1_val = I915_READ(dss_ctl1_reg);
+	if (dss_ctl1_val & JOINER_ENABLE)
+		dss_ctl1_val &= ~JOINER_ENABLE;
+	I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
+
+	dss_ctl2_val = I915_READ(dss_ctl2_reg);
+	if (dss_ctl2_val & LEFT_BRANCH_VDSC_ENABLE ||
+	    dss_ctl2_val & RIGHT_BRANCH_VDSC_ENABLE)
+		dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE |
+				  RIGHT_BRANCH_VDSC_ENABLE);
+	I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
+
+}
-- 
2.18.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-11-02 21:31 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-02 21:31 [PATCH v8 00/19] DSC enabling remaining patches respin Manasi Navare
2018-11-02 21:31 ` [PATCH v8 01/19] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-02 21:31 ` [PATCH v8 02/19] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-02 21:31 ` [PATCH v8 03/19] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-02 21:31 ` [PATCH v8 04/19] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-06  1:38   ` Srivatsa, Anusha
2018-11-06 20:17     ` Manasi Navare
2018-11-02 21:31 ` [PATCH v8 05/19] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-02 21:31 ` [PATCH v8 06/19] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-02 21:31 ` [PATCH v8 07/19] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-03  2:09   ` Manasi Navare
2018-11-06 14:42     ` Ville Syrjälä
2018-11-06 20:37       ` Manasi Navare
2018-11-07 22:31         ` Manasi Navare
2018-11-06 22:41       ` Srivatsa, Anusha
2018-11-06 22:48         ` Manasi Navare
2018-11-02 21:31 ` [PATCH v8 08/19] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-02 21:31 ` [PATCH v8 09/19] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-02 21:31 ` [PATCH v8 10/19] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-06 14:33   ` Ville Syrjälä
2018-11-06 16:52     ` Manasi Navare
2018-11-06 17:00       ` Ville Syrjälä
2018-11-06 20:14         ` Manasi Navare
2018-11-06 20:30           ` Ville Syrjälä
2018-11-02 21:31 ` [PATCH v8 11/19] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-02 21:31 ` [PATCH v8 12/19] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-02 21:31 ` [PATCH v8 13/19] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-06 14:36   ` Ville Syrjälä
2018-11-06 16:50     ` Manasi Navare
2018-11-02 21:31 ` [PATCH v8 14/19] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-02 21:31 ` [PATCH v8 15/19] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-02 21:31 ` [PATCH v8 16/19] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-02 21:31 ` Manasi Navare [this message]
2018-11-02 21:31 ` [PATCH v8 18/19] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-02 21:31 ` [PATCH v8 19/19] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-11-03  2:40   ` Manasi Navare
2018-11-02 21:51 ` ✗ Fi.CI.CHECKPATCH: warning for DSC enabling remaining patches respin Patchwork
2018-11-02 21:57 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-02 22:30 ` ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181102213138.301-18-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox