Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 08/15] drm/i915: Extract icl+ .{enable, disable}_clock() vfuncs
Date: Mon,  1 Feb 2021 20:33:36 +0200	[thread overview]
Message-ID: <20210201183343.15292-9-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20210201183343.15292-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

For ICL+ we have several styles of clock routing for DDIs:
1) TC DDI + TC PHY
   -> needs DDI_CLK_SEL==MG/TBT part form intel_ddi_clk_{select,disable}()
   and ICL_DPCLKA_CFGCR0_TC_CLK_OFF part form icl_{map,unmap}_plls_to_ports()
2) ICL/TGL combo DDI + combo PHY
   -> just need the stuff from icl_{map,unmap}_plls_to_ports()
3) JSL/EHL TC DDI + combo PHY
   -> needs DDI_CLK_SEL==MG part from intel_ddi_clk_{select,disable}() and
   the full combo style clock selection from icl_{map,unmap}_plls_to_ports()
4) ADLS/RKL
   -> these use both TC and combo DDIs with combo PHYs, however they
   always use the full combo style clock selection as per
   icl_{map,unmap}_plls_to_ports() and do not use DDI_CLK_SEL at all,
   thus get treated the same as 2)

We extract all that from the current mess in the following way:
1) icl_ddi_tc_{enable,disable}_clock()
2) icl_ddi_combo_{enable,disable}_clock()
3) jsl_ddi_tc_{enable,disable}_clock()
4) for now we reuse icl_ddi_combo_{enable,disable}_clock() here

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 149 +++++++++++++++--------
 1 file changed, 95 insertions(+), 54 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 39cbaa03d261..aac85e86d776 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3205,8 +3205,8 @@ static void dg1_ddi_disable_clock(struct intel_encoder *encoder)
 	mutex_unlock(&dev_priv->dpll.lock);
 }
 
-static void icl_map_plls_to_ports(struct intel_encoder *encoder,
-				  const struct intel_crtc_state *crtc_state)
+static void icl_ddi_combo_enable_clock(struct intel_encoder *encoder,
+				       const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_shared_dpll *pll = crtc_state->shared_dpll;
@@ -3220,22 +3220,20 @@ static void icl_map_plls_to_ports(struct intel_encoder *encoder,
 	drm_WARN_ON(&dev_priv->drm,
 		    (val & icl_dpclka_cfgcr0_clk_off(dev_priv, phy)) == 0);
 
-	if (intel_phy_is_combo(dev_priv, phy)) {
-		/*
-		 * Even though this register references DDIs, note that we
-		 * want to pass the PHY rather than the port (DDI).  For
-		 * ICL, port=phy in all cases so it doesn't matter, but for
-		 * EHL the bspec notes the following:
-		 *
-		 *   "DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
-		 *   Clock Select chooses the PLL for both DDIA and DDID and
-		 *   drives port A in all cases."
-		 */
-		val &= ~icl_dpclka_cfgcr0_clk_sel_mask(dev_priv, phy);
-		val |= icl_dpclka_cfgcr0_clk_sel(dev_priv, pll->info->id, phy);
-		intel_de_write(dev_priv, reg, val);
-		intel_de_posting_read(dev_priv, reg);
-	}
+	/*
+	 * Even though this register references DDIs, note that we
+	 * want to pass the PHY rather than the port (DDI).  For
+	 * ICL, port=phy in all cases so it doesn't matter, but for
+	 * EHL the bspec notes the following:
+	 *
+	 *   "DDID clock tied to DDIA clock, so DPCLKA_CFGCR0 DDIA
+	 *   Clock Select chooses the PLL for both DDIA and DDID and
+	 *   drives port A in all cases."
+	 */
+	val &= ~icl_dpclka_cfgcr0_clk_sel_mask(dev_priv, phy);
+	val |= icl_dpclka_cfgcr0_clk_sel(dev_priv, pll->info->id, phy);
+	intel_de_write(dev_priv, reg, val);
+	intel_de_posting_read(dev_priv, reg);
 
 	val &= ~icl_dpclka_cfgcr0_clk_off(dev_priv, phy);
 	intel_de_write(dev_priv, reg, val);
@@ -3243,7 +3241,7 @@ static void icl_map_plls_to_ports(struct intel_encoder *encoder,
 	mutex_unlock(&dev_priv->dpll.lock);
 }
 
-static void icl_unmap_plls_to_ports(struct intel_encoder *encoder)
+static void icl_ddi_combo_disable_clock(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
@@ -3382,47 +3380,71 @@ void icl_sanitize_encoder_pll_mapping(struct intel_encoder *encoder)
 		icl_sanitize_port_clk_off(dev_priv, port_mask, ddi_clk_needed);
 }
 
-static void intel_ddi_clk_select(struct intel_encoder *encoder,
-				 const struct intel_crtc_state *crtc_state)
+static void jsl_ddi_tc_enable_clock(struct intel_encoder *encoder,
+				    const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	const struct intel_shared_dpll *pll = crtc_state->shared_dpll;
 	enum port port = encoder->port;
-	enum phy phy = intel_port_to_phy(dev_priv, port);
+
+	if (drm_WARN_ON(&dev_priv->drm, !pll))
+		return;
+
+	/*
+	 * "For DDIC and DDID, program DDI_CLK_SEL to map the MG clock to the port.
+	 *  MG does not exist, but the programming is required to ungate DDIC and DDID."
+	 */
+	intel_de_write(dev_priv, DDI_CLK_SEL(port), DDI_CLK_SEL_MG);
+
+	icl_ddi_combo_enable_clock(encoder, crtc_state);
+}
+
+static void jsl_ddi_tc_disable_clock(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum port port = encoder->port;
+
+	icl_ddi_combo_disable_clock(encoder);
+
+	intel_de_write(dev_priv, DDI_CLK_SEL(port), DDI_CLK_SEL_NONE);
+}
+
+static void icl_ddi_tc_enable_clock(struct intel_encoder *encoder,
+				    const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	const struct intel_shared_dpll *pll = crtc_state->shared_dpll;
+	enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder->port);
+	enum port port = encoder->port;
 
 	if (drm_WARN_ON(&dev_priv->drm, !pll))
 		return;
 
+	intel_de_write(dev_priv, DDI_CLK_SEL(port),
+		       icl_pll_to_ddi_clk_sel(encoder, crtc_state));
+
 	mutex_lock(&dev_priv->dpll.lock);
 
-	if (INTEL_GEN(dev_priv) >= 11) {
-		if (!intel_phy_is_combo(dev_priv, phy))
-			intel_de_write(dev_priv, DDI_CLK_SEL(port),
-				       icl_pll_to_ddi_clk_sel(encoder, crtc_state));
-		else if (IS_JSL_EHL(dev_priv) && port >= PORT_C)
-			/*
-			 * MG does not exist but the programming is required
-			 * to ungate DDIC and DDID
-			 */
-			intel_de_write(dev_priv, DDI_CLK_SEL(port),
-				       DDI_CLK_SEL_MG);
-	}
+	intel_de_rmw(dev_priv, ICL_DPCLKA_CFGCR0,
+		     ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port), 0);
 
 	mutex_unlock(&dev_priv->dpll.lock);
 }
 
-static void intel_ddi_clk_disable(struct intel_encoder *encoder)
+static void icl_ddi_tc_disable_clock(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder->port);
 	enum port port = encoder->port;
-	enum phy phy = intel_port_to_phy(dev_priv, port);
-
-	if (INTEL_GEN(dev_priv) >= 11) {
-		if (!intel_phy_is_combo(dev_priv, phy) ||
-		    (IS_JSL_EHL(dev_priv) && port >= PORT_C))
-			intel_de_write(dev_priv, DDI_CLK_SEL(port),
-				       DDI_CLK_SEL_NONE);
-	}
+
+	mutex_lock(&dev_priv->dpll.lock);
+
+	intel_de_rmw(dev_priv, ICL_DPCLKA_CFGCR0,
+		     0, ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port));
+
+	mutex_unlock(&dev_priv->dpll.lock);
+
+	intel_de_write(dev_priv, DDI_CLK_SEL(port), DDI_CLK_SEL_NONE);
 }
 
 static void cnl_ddi_enable_clock(struct intel_encoder *encoder,
@@ -3523,16 +3545,12 @@ static void intel_ddi_enable_clock(struct intel_encoder *encoder,
 {
 	if (encoder->enable_clock)
 		encoder->enable_clock(encoder, crtc_state);
-	else
-		intel_ddi_clk_select(encoder, crtc_state);
 }
 
 static void intel_ddi_disable_clock(struct intel_encoder *encoder)
 {
 	if (encoder->disable_clock)
 		encoder->disable_clock(encoder);
-	else
-		intel_ddi_clk_disable(encoder);
 }
 
 static void
@@ -4014,9 +4032,6 @@ static void intel_ddi_pre_enable(struct intel_atomic_state *state,
 
 	drm_WARN_ON(&dev_priv->drm, crtc_state->has_pch_encoder);
 
-	if (!IS_DG1(dev_priv) && INTEL_GEN(dev_priv) >= 11)
-		icl_map_plls_to_ports(encoder, crtc_state);
-
 	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
 
 	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
@@ -4215,9 +4230,6 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
 		intel_ddi_post_disable_dp(state, encoder, old_crtc_state,
 					  old_conn_state);
 
-	if (!IS_DG1(dev_priv) && INTEL_GEN(dev_priv) >= 11)
-		icl_unmap_plls_to_ports(encoder);
-
 	if (intel_crtc_has_dp_encoder(old_crtc_state) || is_tc_port)
 		intel_display_power_put(dev_priv,
 					intel_ddi_main_link_aux_domain(dig_port),
@@ -5556,6 +5568,16 @@ static enum hpd_pin cnl_hpd_pin(struct drm_i915_private *dev_priv,
 	return HPD_PORT_A + port - PORT_A;
 }
 
+static bool intel_ddi_is_tc(struct drm_i915_private *i915, enum port port)
+{
+	if (INTEL_GEN(i915) >= 12)
+		return port >= PORT_TC1;
+	else if (INTEL_GEN(i915) >= 11)
+		return port >= PORT_C;
+	else
+		return false;
+}
+
 #define port_tc_name(port) ((port) - PORT_TC1 + '1')
 #define tc_port_name(tc_port) ((tc_port) - TC_PORT_1 + '1')
 
@@ -5660,9 +5682,28 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	encoder->cloneable = 0;
 	encoder->pipe_mask = ~0;
 
-	if (IS_DG1(dev_priv)) {
+	if (IS_ALDERLAKE_S(dev_priv) || IS_ROCKETLAKE(dev_priv)) {
+		encoder->enable_clock = icl_ddi_combo_enable_clock;
+		encoder->disable_clock = icl_ddi_combo_disable_clock;
+	} else if (IS_DG1(dev_priv)) {
 		encoder->enable_clock = dg1_ddi_enable_clock;
 		encoder->disable_clock = dg1_ddi_disable_clock;
+	} else if (IS_JSL_EHL(dev_priv)) {
+		if (intel_ddi_is_tc(dev_priv, port)) {
+			encoder->enable_clock = jsl_ddi_tc_enable_clock;
+			encoder->disable_clock = jsl_ddi_tc_disable_clock;
+		} else {
+			encoder->enable_clock = icl_ddi_combo_enable_clock;
+			encoder->disable_clock = icl_ddi_combo_disable_clock;
+		}
+	} else if (INTEL_GEN(dev_priv) >= 11) {
+		if (intel_ddi_is_tc(dev_priv, port)) {
+			encoder->enable_clock = icl_ddi_tc_enable_clock;
+			encoder->disable_clock = icl_ddi_tc_disable_clock;
+		} else {
+			encoder->enable_clock = icl_ddi_combo_enable_clock;
+			encoder->disable_clock = icl_ddi_combo_disable_clock;
+		}
 	} else if (IS_CANNONLAKE(dev_priv)) {
 		encoder->enable_clock = cnl_ddi_enable_clock;
 		encoder->disable_clock = cnl_ddi_disable_clock;
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-02-01 18:34 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-01 18:33 [Intel-gfx] [PATCH 00/15] drm/i915: Clean up the DDI clock routing mess Ville Syrjala
2021-02-01 18:33 ` [Intel-gfx] [PATCH 01/15] drm/i915: Extract icl_dpclka_cfgcr0_reg() Ville Syrjala
2021-02-01 18:55   ` Lucas De Marchi
2021-02-01 18:33 ` [Intel-gfx] [PATCH 02/15] drm/i915: Extract icl_dpclka_cfgcr0_clk_sel*() Ville Syrjala
2021-02-01 18:59   ` Lucas De Marchi
2021-02-01 18:33 ` [Intel-gfx] [PATCH 03/15] drm/i915: Introduce .{enable, disable}_clock() encoder vfuncs Ville Syrjala
2021-02-01 19:04   ` Lucas De Marchi
2021-02-01 19:09     ` Ville Syrjälä
2021-02-01 18:33 ` [Intel-gfx] [PATCH 04/15] drm/i915: Extract hsw_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-01 19:07   ` Lucas De Marchi
2021-02-01 19:16     ` Ville Syrjälä
2021-02-01 18:33 ` [Intel-gfx] [PATCH 05/15] drm/i915: Extract skl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-01 18:33 ` [Intel-gfx] [PATCH 06/15] drm/i195: Extract cnl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-01 18:33 ` [Intel-gfx] [PATCH 07/15] drm/i915: Convert DG1 over to .{enable, disable}_clock() Ville Syrjala
2021-02-01 18:33 ` Ville Syrjala [this message]
2021-02-01 18:33 ` [Intel-gfx] [PATCH 09/15] drm/i915: Use intel_de_rmw() for DDI clock routing Ville Syrjala
2021-02-01 18:33 ` [Intel-gfx] [PATCH 10/15] drm/i915: Sprinkle a few missing locks around shared DDI clock registers Ville Syrjala
2021-02-01 19:15   ` Lucas De Marchi
2021-02-01 19:21     ` Ville Syrjälä
2021-02-01 18:33 ` [Intel-gfx] [PATCH 11/15] drm/i915: Sprinkle WARN(!pll) into icl/dg1 .clock_enable() Ville Syrjala
2021-02-01 19:15   ` Lucas De Marchi
2021-02-01 18:33 ` [Intel-gfx] [PATCH 12/15] drm/i915: Extract _cnl_ddi_{enable, disable}_clock() Ville Syrjala
2021-02-01 18:33 ` [Intel-gfx] [PATCH 13/15] drm/i915: Split alds/rkl from icl_ddi_combo_{enable, disable}_clock() Ville Syrjala
2021-02-01 19:22   ` Lucas De Marchi
2021-02-01 19:31     ` Ville Syrjälä
2021-02-01 19:38       ` Ville Syrjälä
2021-02-01 18:33 ` [Intel-gfx] [PATCH 14/15] drm/i915: Use .disable_clock() for pll sanitation Ville Syrjala
2021-02-01 18:33 ` [Intel-gfx] [PATCH 15/15] drm/i915: Relocate icl_sanitize_encoder_pll_mapping() Ville Syrjala
2021-02-01 19:28 ` [Intel-gfx] [PATCH 00/15] drm/i915: Clean up the DDI clock routing mess Lucas De Marchi
2021-02-01 19:41 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2021-02-01 19:42 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-02-01 20:12 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2021-02-01 20:34   ` Ville Syrjälä
2021-02-01 21:08     ` Vudum, Lakshminarayana
2021-02-02  6:05     ` Nautiyal, Ankit K
2021-02-01 21:08 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-02-02  2:12 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210201183343.15292-9-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox