From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: me@freedesktop.org
Subject: [Intel-gfx] [PATCH v2 13/50] drm/i915/xelpd: Support DP1.4 compression BPPs
Date: Thu, 25 Mar 2021 11:06:43 -0700 [thread overview]
Message-ID: <20210325180720.401410-14-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210325180720.401410-1-matthew.d.roper@intel.com>
From: Vandita Kulkarni <vandita.kulkarni@intel.com>
Support compression BPPs from bpc to uncompressed BPP -1.
So far we have 8,10,12 as valid compressed BPPS now the
support is extended.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 32 ++++++++++++++++++-------
1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d7648a0a7d9d..af2c47e50884 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -107,6 +107,7 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
}
static void intel_dp_unset_edid(struct intel_dp *intel_dp);
+static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
/* update sink rates from dpcd */
static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
@@ -492,7 +493,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
u32 link_clock, u32 lane_count,
u32 mode_clock, u32 mode_hdisplay,
- bool bigjoiner)
+ bool bigjoiner,
+ u32 pipe_bpp)
{
u32 bits_per_pixel, max_bpp_small_joiner_ram;
int i;
@@ -517,6 +519,7 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
max_bpp_small_joiner_ram);
+
/*
* Greatest allowed DSC BPP = MIN (output BPP from available Link BW
* check, output bpp from small joiner RAM check)
@@ -539,12 +542,17 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
return 0;
}
- /* Find the nearest match in the array of known BPPs from VESA */
- for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
- if (bits_per_pixel < valid_dsc_bpp[i + 1])
- break;
+ /* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */
+ if (DISPLAY_VER(i915) >= 13) {
+ bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1);
+ } else {
+ /* Find the nearest match in the array of known BPPs from VESA */
+ for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
+ if (bits_per_pixel < valid_dsc_bpp[i + 1])
+ break;
+ }
+ bits_per_pixel = valid_dsc_bpp[i];
}
- bits_per_pixel = valid_dsc_bpp[i];
/*
* Compressed BPP in U6.4 format so multiply by 16, for Gen 11,
@@ -778,6 +786,12 @@ intel_dp_mode_valid(struct drm_connector *connector,
*/
if (DISPLAY_VER(dev_priv) >= 10 &&
drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
+ /*
+ * TBD pass the connector BPC,
+ * for now U8_MAX so that max BPC on that platform would be picked
+ */
+ int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
+
if (intel_dp_is_edp(intel_dp)) {
dsc_max_output_bpp =
drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4;
@@ -791,7 +805,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
max_lanes,
target_clock,
mode->hdisplay,
- bigjoiner) >> 4;
+ bigjoiner,
+ pipe_bpp) >> 4;
dsc_slice_count =
intel_dp_dsc_get_slice_count(intel_dp,
target_clock,
@@ -1276,7 +1291,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
pipe_config->lane_count,
adjusted_mode->crtc_clock,
adjusted_mode->crtc_hdisplay,
- pipe_config->bigjoiner);
+ pipe_config->bigjoiner,
+ pipe_bpp);
dsc_dp_slice_count =
intel_dp_dsc_get_slice_count(intel_dp,
adjusted_mode->crtc_clock,
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-25 18:07 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 18:06 [Intel-gfx] [PATCH v2 00/50] Introduce Alder Lake-P Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 01/50] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 02/50] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 03/50] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 04/50] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 05/50] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 06/50] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-03-26 16:45 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 07/50] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 08/50] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 09/50] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 10/50] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 11/50] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-25 21:06 ` Souza, Jose
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 12/50] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-25 18:06 ` Matt Roper [this message]
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 14/50] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 15/50] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 16/50] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-04-07 12:58 ` Jani Nikula
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 17/50] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 18/50] drm/i915/adl_p: Add PCI Devices IDs Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 19/50] drm/i915/adl_p: ADL_P device info enabling Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 20/50] drm/i915/adl_p: Add PCH support Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 21/50] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 22/50] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 23/50] drm/i915/adl_p: Load DMC Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 24/50] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 25/50] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 26/50] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-03-26 16:31 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 27/50] drm/i915/adl_p: Handle TC cold Matt Roper
2021-03-26 16:30 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 28/50] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-03-26 16:03 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 29/50] drm/i915/adl_p: Enable modular fia Matt Roper
2021-03-26 16:31 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 30/50] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 31/50] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 32/50] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 33/50] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 34/50] drm/i915/adl_p: MBUS programming Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 35/50] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 36/50] drm/i915/adl_p: Add initial ADL_P Workarounds Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 37/50] drm/i915/adlp: Define GuC/HuC for Alderlake_P Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 38/50] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 39/50] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-03-26 16:18 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 40/50] drm/i915/adl_p: Add PLL Support Matt Roper
2021-03-26 16:25 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 41/50] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 42/50] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 43/50] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 44/50] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 45/50] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 46/50] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 47/50] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 48/50] drm/i915/display/adl_p: Remove CCS support Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 49/50] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 50/50] drm/i915/display/adl_p: Implement PSR changes Matt Roper
2021-03-25 22:43 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Alder Lake-P (rev2) Patchwork
2021-03-25 22:45 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-25 22:48 ` [Intel-gfx] ✗ Fi.CI.DOCS: " Patchwork
2021-03-25 23:12 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-03-26 4:33 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2021-04-21 11:03 ` [Intel-gfx] [PATCH v2 00/50] Introduce Alder Lake-P Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210325180720.401410-14-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=me@freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox