[Intel-gfx] [PATCH v2 31/50] drm/i915/adl_p: Add ddb allocation support

[Matt Roper <matthew.d.roper@intel.com>]

From: Vandita Kulkarni <vandita.kulkarni@intel.com>

On adlp the two mbuses have two display pipes and
two DBUFS, Pipe A and D on Mbus1 and Pipe B and C on
Mbus2. The Mbus can be joined and all the DBUFS can be
used on Pipe A or B.

Bspec: 49255
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 .../drm/i915/display/intel_display_power.h    |   2 +
 drivers/gpu/drm/i915/i915_reg.h               |  22 +++-
 drivers/gpu/drm/i915/intel_pm.c               | 121 +++++++++++++++++-
 3 files changed, 140 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index f20d22b09a65..4f0917df4375 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -389,6 +389,8 @@ intel_display_power_put_all_in_set(struct drm_i915_private *i915,
 enum dbuf_slice {
 	DBUF_S1,
 	DBUF_S2,
+	DBUF_S3,
+	DBUF_S4,
 	I915_MAX_DBUF_SLICES
 };
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5b378e5091fa..da8ee0a3b652 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7299,7 +7299,7 @@ enum {
 
 #define _PLANE_BUF_CFG_1_B			0x7127c
 #define _PLANE_BUF_CFG_2_B			0x7137c
-#define  DDB_ENTRY_MASK				0x7FF /* skl+: 10 bits, icl+ 11 bits */
+#define  DDB_ENTRY_MASK				0xFFF /* skl+: 10 bits, icl+ 11 bits, adlp+ 12 bits */
 #define  DDB_ENTRY_END_SHIFT			16
 #define _PLANE_BUF_CFG_1(pipe)	\
 	_PIPE(pipe, _PLANE_BUF_CFG_1_A, _PLANE_BUF_CFG_1_B)
@@ -8136,9 +8136,23 @@ enum {
 #define  DISP_DATA_PARTITION_5_6	(1 << 6)
 #define  DISP_IPC_ENABLE		(1 << 3)
 
-#define _DBUF_CTL_S1				0x45008
-#define _DBUF_CTL_S2				0x44FE8
-#define DBUF_CTL_S(slice)			_MMIO(_PICK_EVEN(slice, _DBUF_CTL_S1, _DBUF_CTL_S2))
+/*
+ * The below are numbered starting from "S1" on gen11/gen12, but starting
+ * with gen13 display, the bspec switches to a 0-based numbering scheme
+ * (although the addresses stay the same so new S0 = old S1, new S1 = old S2).
+ * We'll just use the 0-based numbering here for all platforms since it's the
+ * way things will be named by the hardware team going forward, plus it's more
+ * consistent with how most of the rest of our registers are named.
+ */
+#define _DBUF_CTL_S0				0x45008
+#define _DBUF_CTL_S1				0x44FE8
+#define _DBUF_CTL_S2				0x44300
+#define _DBUF_CTL_S3				0x44304
+#define DBUF_CTL_S(slice)			_MMIO(_PICK(slice, \
+							    _DBUF_CTL_S0, \
+							    _DBUF_CTL_S1, \
+							    _DBUF_CTL_S2, \
+							    _DBUF_CTL_S3))
 #define  DBUF_POWER_REQUEST			REG_BIT(31)
 #define  DBUF_POWER_STATE			REG_BIT(30)
 #define  DBUF_TRACKER_STATE_SERVICE_MASK	REG_GENMASK(23, 19)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index acc6c2b9e6e9..f0ba23c0f419 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4573,6 +4573,118 @@ static const struct dbuf_slice_conf_entry tgl_allowed_dbufs[] =
 	{}
 };
 
+static const struct dbuf_slice_conf_entry adlp_allowed_dbufs[] = {
+	{
+		.active_pipes = BIT(PIPE_A),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{
+		.active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D),
+		.dbuf_mask = {
+			[PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2),
+			[PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4),
+			[PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2),
+		},
+	},
+	{}
+
+};
+
 static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes,
 			      const struct dbuf_slice_conf_entry *dbuf_slices)
 {
@@ -4612,12 +4724,19 @@ static u8 tgl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes)
 	return compute_dbuf_slices(pipe, active_pipes, tgl_allowed_dbufs);
 }
 
+static u32 adlp_compute_dbuf_slices(enum pipe pipe, u32 active_pipes)
+{
+	return compute_dbuf_slices(pipe, active_pipes, adlp_allowed_dbufs);
+}
+
 static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum pipe pipe = crtc->pipe;
 
-	if (IS_DISPLAY_VER(dev_priv, 12))
+	if (IS_ALDERLAKE_P(dev_priv))
+		return adlp_compute_dbuf_slices(pipe, active_pipes);
+	else if (IS_DISPLAY_VER(dev_priv, 12))
 		return tgl_compute_dbuf_slices(pipe, active_pipes);
 	else if (IS_DISPLAY_VER(dev_priv, 11))
 		return icl_compute_dbuf_slices(pipe, active_pipes);
-- 
2.25.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx