From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: me@freedesktop.org
Subject: [Intel-gfx] [PATCH v2 07/50] drm/i915/xelpd: Add XE_LPD power wells
Date: Thu, 25 Mar 2021 11:06:37 -0700 [thread overview]
Message-ID: <20210325180720.401410-8-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210325180720.401410-1-matthew.d.roper@intel.com>
Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D. These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):
PG0
|
--PG1--
/ \
PGA --PG2--
/ | \
PGB PGC PGD
PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.
PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).
Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
.../drm/i915/display/intel_display_power.c | 426 +++++++++++++++++-
.../drm/i915/display/intel_display_power.h | 9 +
drivers/gpu/drm/i915/display/intel_vdsc.c | 4 +-
drivers/gpu/drm/i915/i915_reg.h | 10 +
4 files changed, 445 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index cef177208e68..e3495d3305b3 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -1035,7 +1035,7 @@ static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
enum i915_power_well_id high_pg;
/* Power wells at this level and above must be disabled for DC5 entry */
- if (DISPLAY_VER(dev_priv) >= 12)
+ if (DISPLAY_VER(dev_priv) == 12)
high_pg = ICL_DISP_PW_3;
else
high_pg = SKL_DISP_PW_2;
@@ -3012,6 +3012,113 @@ intel_display_power_put_mask_in_set(struct drm_i915_private *i915,
BIT_ULL(POWER_DOMAIN_AUX_B) | \
BIT_ULL(POWER_DOMAIN_INIT))
+/*
+ * XE_LPD Power Domains
+ *
+ * Previous platforms required that PG(n-1) be enabled before PG(n). That
+ * dependency chain turns into a dependency tree on XE_LPD:
+ *
+ * PG0
+ * |
+ * --PG1--
+ * / \
+ * PGA --PG2--
+ * / | \
+ * PGB PGC PGD
+ *
+ * Power wells must be enabled from top to bottom and disabled from bottom
+ * to top. This allows pipes to be power gated independently.
+ */
+
+#define XELPD_PW_D_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PIPE_D) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_D_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_D) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_C_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PIPE_C) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_B_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PIPE_B) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_A_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PIPE_A) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_PW_2_POWER_DOMAINS ( \
+ XELPD_PW_B_POWER_DOMAINS | \
+ XELPD_PW_C_POWER_DOMAINS | \
+ XELPD_PW_D_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_AUDIO) | \
+ BIT_ULL(POWER_DOMAIN_VGA) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_D_XELPD) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_E_XELPD) | \
+ BIT_ULL(POWER_DOMAIN_AUX_C) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC1) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC2) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC3) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_LANES_TC4) | \
+ BIT_ULL(POWER_DOMAIN_AUX_C) | \
+ BIT_ULL(POWER_DOMAIN_AUX_D_XELPD) | \
+ BIT_ULL(POWER_DOMAIN_AUX_E_XELPD) | \
+ BIT_ULL(POWER_DOMAIN_AUX_USBC1) | \
+ BIT_ULL(POWER_DOMAIN_AUX_USBC2) | \
+ BIT_ULL(POWER_DOMAIN_AUX_USBC3) | \
+ BIT_ULL(POWER_DOMAIN_AUX_USBC4) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+/*
+ * XELPD PW_1/PG_1 domains (under HW/DMC control):
+ * - DBUF function (registers are in PW0)
+ * - Transcoder A
+ * - DDI_A and DDI_B
+ *
+ * XELPD PW_0/PW_1 domains (under HW/DMC control):
+ * - PCI
+ * - Clocks except port PLL
+ * - Shared functions:
+ * * interrupts except pipe interrupts
+ * * MBus except PIPE_MBUS_DBOX_CTL
+ * * DBUF registers
+ * - Central power except FBC
+ * - Top-level GTC (DDI-level GTC is in the well associated with the DDI)
+ */
+
+#define XELPD_DISPLAY_DC_OFF_POWER_DOMAINS ( \
+ XELPD_PW_2_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_MODESET) | \
+ BIT_ULL(POWER_DOMAIN_AUX_A) | \
+ BIT_ULL(POWER_DOMAIN_AUX_B) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define XELPD_AUX_IO_D_XELPD_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_D_XELPD)
+#define XELPD_AUX_IO_E_XELPD_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_E_XELPD)
+#define XELPD_AUX_IO_USBC1_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_USBC1)
+#define XELPD_AUX_IO_USBC2_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_USBC2)
+#define XELPD_AUX_IO_USBC3_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_USBC3)
+#define XELPD_AUX_IO_USBC4_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_USBC4)
+
+#define XELPD_AUX_IO_TBT1_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_TBT1)
+#define XELPD_AUX_IO_TBT2_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_TBT2)
+#define XELPD_AUX_IO_TBT3_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_TBT3)
+#define XELPD_AUX_IO_TBT4_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_AUX_TBT4)
+
+#define XELPD_DDI_IO_D_XELPD_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_D_XELPD)
+#define XELPD_DDI_IO_E_XELPD_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_E_XELPD)
+#define XELPD_DDI_IO_TC1_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC1)
+#define XELPD_DDI_IO_TC2_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC2)
+#define XELPD_DDI_IO_TC3_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC3)
+#define XELPD_DDI_IO_TC4_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC4)
+
static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
.sync_hw = i9xx_power_well_sync_hw_noop,
.enable = i9xx_always_on_power_well_noop,
@@ -4516,6 +4623,319 @@ static const struct i915_power_well_desc rkl_power_wells[] = {
},
};
+static const struct i915_power_well_desc xelpd_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = true,
+ .domains = POWER_DOMAIN_MASK,
+ .ops = &i9xx_always_on_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ },
+ {
+ .name = "power well 1",
+ /* Handled by the DMC firmware */
+ .always_on = true,
+ .domains = 0,
+ .ops = &hsw_power_well_ops,
+ .id = SKL_DISP_PW_1,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_1,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "DC off",
+ .domains = XELPD_DISPLAY_DC_OFF_POWER_DOMAINS,
+ .ops = &gen9_dc_off_power_well_ops,
+ .id = SKL_DISP_DC_OFF,
+ },
+ {
+ .name = "power well 2",
+ .domains = XELPD_PW_2_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = SKL_DISP_PW_2,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_2,
+ .hsw.has_vga = true,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "power well A",
+ .domains = XELPD_PW_A_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_PW_A,
+ .hsw.irq_pipe_mask = BIT(PIPE_A),
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "power well B",
+ .domains = XELPD_PW_B_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_PW_B,
+ .hsw.irq_pipe_mask = BIT(PIPE_B),
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "power well C",
+ .domains = XELPD_PW_C_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_PW_C,
+ .hsw.irq_pipe_mask = BIT(PIPE_C),
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "power well D",
+ .domains = XELPD_PW_D_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_PW_D,
+ .hsw.irq_pipe_mask = BIT(PIPE_D),
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "DDI A IO",
+ .domains = ICL_DDI_IO_A_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_A,
+ }
+ },
+ {
+ .name = "DDI B IO",
+ .domains = ICL_DDI_IO_B_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_B,
+ }
+ },
+ {
+ .name = "DDI C IO",
+ .domains = ICL_DDI_IO_C_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_C,
+ }
+ },
+ {
+ .name = "DDI IO D_XELPD",
+ .domains = XELPD_DDI_IO_D_XELPD_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_DDI_D,
+ }
+ },
+ {
+ .name = "DDI IO E_XELPD",
+ .domains = XELPD_DDI_IO_E_XELPD_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_DDI_E,
+ }
+ },
+ {
+ .name = "DDI IO TC1",
+ .domains = XELPD_DDI_IO_TC1_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_DDI_TC1,
+ }
+ },
+ {
+ .name = "DDI IO TC2",
+ .domains = XELPD_DDI_IO_TC2_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_DDI_TC2,
+ }
+ },
+ {
+ .name = "DDI IO TC3",
+ .domains = XELPD_DDI_IO_TC3_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_DDI_TC3,
+ }
+ },
+ {
+ .name = "DDI IO TC4",
+ .domains = XELPD_DDI_IO_TC4_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_DDI_TC4,
+ }
+ },
+ {
+ .name = "AUX A",
+ .domains = ICL_AUX_A_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_A,
+ },
+ },
+ {
+ .name = "AUX B",
+ .domains = ICL_AUX_B_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_B,
+ },
+ },
+ {
+ .name = "AUX C",
+ .domains = TGL_AUX_C_IO_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_C,
+ },
+ },
+ {
+ .name = "AUX D_XELPD",
+ .domains = XELPD_AUX_IO_D_XELPD_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_AUX_D,
+ },
+ },
+ {
+ .name = "AUX E_XELPD",
+ .domains = XELPD_AUX_IO_E_XELPD_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = XELPD_PW_CTL_IDX_AUX_E,
+ },
+ },
+ {
+ .name = "AUX USBC1",
+ .domains = XELPD_AUX_IO_USBC1_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TC1,
+ },
+ },
+ {
+ .name = "AUX USBC2",
+ .domains = XELPD_AUX_IO_USBC2_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TC2,
+ },
+ },
+ {
+ .name = "AUX USBC3",
+ .domains = XELPD_AUX_IO_USBC3_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TC3,
+ },
+ },
+ {
+ .name = "AUX USBC4",
+ .domains = XELPD_AUX_IO_USBC4_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TC4,
+ },
+ },
+ {
+ .name = "AUX TBT1",
+ .domains = XELPD_AUX_IO_TBT1_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TBT1,
+ .hsw.is_tc_tbt = true,
+ },
+ },
+ {
+ .name = "AUX TBT2",
+ .domains = XELPD_AUX_IO_TBT2_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TBT2,
+ .hsw.is_tc_tbt = true,
+ },
+ },
+ {
+ .name = "AUX TBT3",
+ .domains = XELPD_AUX_IO_TBT3_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TBT3,
+ .hsw.is_tc_tbt = true,
+ },
+ },
+ {
+ .name = "AUX TBT4",
+ .domains = XELPD_AUX_IO_TBT4_POWER_DOMAINS,
+ .ops = &icl_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = TGL_PW_CTL_IDX_AUX_TBT4,
+ .hsw.is_tc_tbt = true,
+ },
+ },
+};
+
static int
sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
int disable_power_well)
@@ -4673,7 +5093,9 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
* The enabling order will be from lower to higher indexed wells,
* the disabling order is reversed.
*/
- if (IS_ALDERLAKE_S(dev_priv) || IS_DG1(dev_priv)) {
+ if (DISPLAY_VER(dev_priv) >= 13) {
+ err = set_power_wells(power_domains, xelpd_power_wells);
+ } else if (IS_ALDERLAKE_S(dev_priv) || IS_DG1(dev_priv)) {
err = set_power_wells_mask(power_domains, tgl_power_wells,
BIT_ULL(TGL_DISP_PW_TC_COLD_OFF));
} else if (IS_ROCKETLAKE(dev_priv)) {
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index f3ca5d5c9778..f20d22b09a65 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -49,6 +49,9 @@ enum intel_display_power_domain {
POWER_DOMAIN_PORT_DDI_LANES_TC5,
POWER_DOMAIN_PORT_DDI_LANES_TC6,
+ POWER_DOMAIN_PORT_DDI_LANES_D_XELPD = POWER_DOMAIN_PORT_DDI_LANES_TC5, /* XELPD */
+ POWER_DOMAIN_PORT_DDI_LANES_E_XELPD,
+
POWER_DOMAIN_PORT_DDI_A_IO,
POWER_DOMAIN_PORT_DDI_B_IO,
POWER_DOMAIN_PORT_DDI_C_IO,
@@ -66,6 +69,9 @@ enum intel_display_power_domain {
POWER_DOMAIN_PORT_DDI_IO_TC5,
POWER_DOMAIN_PORT_DDI_IO_TC6,
+ POWER_DOMAIN_PORT_DDI_IO_D_XELPD = POWER_DOMAIN_PORT_DDI_IO_TC5, /* XELPD */
+ POWER_DOMAIN_PORT_DDI_IO_E_XELPD,
+
POWER_DOMAIN_PORT_DSI,
POWER_DOMAIN_PORT_CRT,
POWER_DOMAIN_PORT_OTHER,
@@ -88,6 +94,9 @@ enum intel_display_power_domain {
POWER_DOMAIN_AUX_USBC5,
POWER_DOMAIN_AUX_USBC6,
+ POWER_DOMAIN_AUX_D_XELPD = POWER_DOMAIN_AUX_USBC5, /* XELPD */
+ POWER_DOMAIN_AUX_E_XELPD,
+
POWER_DOMAIN_AUX_IO_A,
POWER_DOMAIN_AUX_C_TBT,
POWER_DOMAIN_AUX_D_TBT,
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 3a21c65ffa85..38f89e777f2b 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -469,13 +469,13 @@ intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
* POWER_DOMAIN_TRANSCODER_VDSC_PW2 power domain in two cases:
*
* - ICL eDP/DSI transcoder
- * - Gen12+ (except RKL) pipe A
+ * - Display version 12 (except RKL) pipe A
*
* For any other pipe, VDSC/joining uses the power well associated with
* the pipe in use. Hence another reference on the pipe power domain
* will suffice. (Except no VDSC/joining on ICL pipe A.)
*/
- if (DISPLAY_VER(i915) >= 12 && !IS_ROCKETLAKE(i915) && pipe == PIPE_A)
+ if (DISPLAY_VER(i915) == 12 && !IS_ROCKETLAKE(i915) && pipe == PIPE_A)
return POWER_DOMAIN_TRANSCODER_VDSC_PW2;
else if (is_pipe_dsc(crtc_state))
return POWER_DOMAIN_PIPE(pipe);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 460c44270011..b3731cc9afad 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9644,6 +9644,12 @@ enum {
#define ICL_PW_CTL_IDX_PW_2 1
#define ICL_PW_CTL_IDX_PW_1 0
+/* XE_LPD - power wells */
+#define XELPD_PW_CTL_IDX_PW_D 8
+#define XELPD_PW_CTL_IDX_PW_C 7
+#define XELPD_PW_CTL_IDX_PW_B 6
+#define XELPD_PW_CTL_IDX_PW_A 5
+
#define ICL_PWR_WELL_CTL_AUX1 _MMIO(0x45440)
#define ICL_PWR_WELL_CTL_AUX2 _MMIO(0x45444)
#define ICL_PWR_WELL_CTL_AUX4 _MMIO(0x4544C)
@@ -9658,7 +9664,9 @@ enum {
#define TGL_PW_CTL_IDX_AUX_TBT1 9
#define ICL_PW_CTL_IDX_AUX_TBT1 8
#define TGL_PW_CTL_IDX_AUX_TC6 8
+#define XELPD_PW_CTL_IDX_AUX_E 8
#define TGL_PW_CTL_IDX_AUX_TC5 7
+#define XELPD_PW_CTL_IDX_AUX_D 7
#define TGL_PW_CTL_IDX_AUX_TC4 6
#define ICL_PW_CTL_IDX_AUX_F 5
#define TGL_PW_CTL_IDX_AUX_TC3 5
@@ -9673,7 +9681,9 @@ enum {
#define ICL_PWR_WELL_CTL_DDI1 _MMIO(0x45450)
#define ICL_PWR_WELL_CTL_DDI2 _MMIO(0x45454)
#define ICL_PWR_WELL_CTL_DDI4 _MMIO(0x4545C)
+#define XELPD_PW_CTL_IDX_DDI_E 8
#define TGL_PW_CTL_IDX_DDI_TC6 8
+#define XELPD_PW_CTL_IDX_DDI_D 7
#define TGL_PW_CTL_IDX_DDI_TC5 7
#define TGL_PW_CTL_IDX_DDI_TC4 6
#define ICL_PW_CTL_IDX_DDI_F 5
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-25 18:07 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 18:06 [Intel-gfx] [PATCH v2 00/50] Introduce Alder Lake-P Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 01/50] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 02/50] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 03/50] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 04/50] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 05/50] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 06/50] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-03-26 16:45 ` Imre Deak
2021-03-25 18:06 ` Matt Roper [this message]
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 08/50] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 09/50] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 10/50] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 11/50] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-25 21:06 ` Souza, Jose
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 12/50] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 13/50] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 14/50] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 15/50] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 16/50] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-04-07 12:58 ` Jani Nikula
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 17/50] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 18/50] drm/i915/adl_p: Add PCI Devices IDs Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 19/50] drm/i915/adl_p: ADL_P device info enabling Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 20/50] drm/i915/adl_p: Add PCH support Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 21/50] drm/i915/adl_p: Add dedicated SAGV watermarks Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 22/50] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 23/50] drm/i915/adl_p: Load DMC Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 24/50] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 25/50] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 26/50] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-03-26 16:31 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 27/50] drm/i915/adl_p: Handle TC cold Matt Roper
2021-03-26 16:30 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 28/50] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-03-26 16:03 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 29/50] drm/i915/adl_p: Enable modular fia Matt Roper
2021-03-26 16:31 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 30/50] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 31/50] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 32/50] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 33/50] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 34/50] drm/i915/adl_p: MBUS programming Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 35/50] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 36/50] drm/i915/adl_p: Add initial ADL_P Workarounds Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 37/50] drm/i915/adlp: Define GuC/HuC for Alderlake_P Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 38/50] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 39/50] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-03-26 16:18 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 40/50] drm/i915/adl_p: Add PLL Support Matt Roper
2021-03-26 16:25 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 41/50] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 42/50] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 43/50] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 44/50] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 45/50] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 46/50] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 47/50] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 48/50] drm/i915/display/adl_p: Remove CCS support Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 49/50] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 50/50] drm/i915/display/adl_p: Implement PSR changes Matt Roper
2021-03-25 22:43 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Alder Lake-P (rev2) Patchwork
2021-03-25 22:45 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-25 22:48 ` [Intel-gfx] ✗ Fi.CI.DOCS: " Patchwork
2021-03-25 23:12 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-03-26 4:33 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2021-04-21 11:03 ` [Intel-gfx] [PATCH v2 00/50] Introduce Alder Lake-P Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210325180720.401410-8-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=me@freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox