[Intel-gfx] [PATCH 10/26] drm/i915: Extract intel_crtc_dotclock()

[Ville Syrjala <ville.syrjala@linux.intel.com>]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Extract intel_crtc_dotclock() from ddi_dotclock_get(). We'll reuse
this during state computation in order to determine the actual final
dotclcok after the DPLL computation has been done (which may not give
us the exact same port_clock that we fed in).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 9e6fa59eabba..0cf2d4fba6a8 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -322,14 +322,10 @@ static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
 	}
 }
 
-static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
+int intel_crtc_dotclock(const struct intel_crtc_state *pipe_config)
 {
 	int dotclock;
 
-	/* CRT dotclock is determined via other means */
-	if (pipe_config->has_pch_encoder)
-		return;
-
 	if (intel_crtc_has_dp_encoder(pipe_config))
 		dotclock = intel_dotclock_calculate(pipe_config->port_clock,
 						    &pipe_config->dp_m_n);
@@ -345,7 +341,17 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
 	if (pipe_config->pixel_multiplier)
 		dotclock /= pipe_config->pixel_multiplier;
 
-	pipe_config->hw.adjusted_mode.crtc_clock = dotclock;
+	return dotclock;
+}
+
+static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
+{
+	/* CRT dotclock is determined via other means */
+	if (pipe_config->has_pch_encoder)
+		return;
+
+	pipe_config->hw.adjusted_mode.crtc_clock =
+		intel_crtc_dotclock(pipe_config);
 }
 
 void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state,
-- 
2.35.1