Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: [Intel-gfx] [PATCH 09/22] drm/i915/audio: Read ELD buffer size from hardware
Date: Tue, 11 Oct 2022 19:59:58 +0300	[thread overview]
Message-ID: <20221011170011.17198-10-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20221011170011.17198-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

We currently read the ELD buffer size from hardware on g4x,
but on ilk+ we just hardcode it to 84 bytes. Let's unify
this and just do the hardware readout on all platforms,
in case the size changes in the future or something.

TODO: should perhaps do the readout during driver init and
stash the results somewhere so that we could check that the
connector's ELD actually fits and not even try to enable audio
in that case...

Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_audio.c | 49 ++++++++++++++++++----
 1 file changed, 42 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c
index 3f328913fc90..abca5f23673a 100644
--- a/drivers/gpu/drm/i915/display/intel_audio.c
+++ b/drivers/gpu/drm/i915/display/intel_audio.c
@@ -304,6 +304,15 @@ static int audio_config_hdmi_get_n(const struct intel_crtc_state *crtc_state,
 	return 0;
 }
 
+static int g4x_eld_buffer_size(struct drm_i915_private *i915)
+{
+	u32 tmp;
+
+	tmp = intel_de_read(i915, G4X_AUD_CNTL_ST);
+
+	return REG_FIELD_GET(G4X_ELD_BUFFER_SIZE_MASK, tmp);
+}
+
 static void g4x_audio_codec_disable(struct intel_encoder *encoder,
 				    const struct intel_crtc_state *old_crtc_state,
 				    const struct drm_connector_state *old_conn_state)
@@ -329,10 +338,11 @@ static void g4x_audio_codec_enable(struct intel_encoder *encoder,
 
 	tmp = intel_de_read(i915, G4X_AUD_CNTL_ST);
 	tmp &= ~(G4X_ELD_VALID | G4X_ELD_ADDRESS_MASK);
-	len = REG_FIELD_GET(G4X_ELD_BUFFER_SIZE_MASK, tmp);
 	intel_de_write(i915, G4X_AUD_CNTL_ST, tmp);
 
+	len = g4x_eld_buffer_size(i915);
 	len = min(drm_eld_size(eld) / 4, len);
+
 	for (i = 0; i < len; i++)
 		intel_de_write(i915, G4X_HDMIW_HDMIEDID,
 			       *((const u32 *)eld + i));
@@ -442,6 +452,16 @@ hsw_audio_config_update(struct intel_encoder *encoder,
 		hsw_hdmi_audio_config_update(encoder, crtc_state);
 }
 
+static int hsw_eld_buffer_size(struct drm_i915_private *i915,
+			       enum transcoder cpu_transcoder)
+{
+	u32 tmp;
+
+	tmp = intel_de_read(i915, HSW_AUD_DIP_ELD_CTRL(cpu_transcoder));
+
+	return REG_FIELD_GET(IBX_ELD_BUFFER_SIZE_MASK, tmp);
+}
+
 static void hsw_audio_codec_disable(struct intel_encoder *encoder,
 				    const struct intel_crtc_state *old_crtc_state,
 				    const struct drm_connector_state *old_conn_state)
@@ -615,9 +635,10 @@ static void hsw_audio_codec_enable(struct intel_encoder *encoder,
 	tmp &= ~IBX_ELD_ADDRESS_MASK;
 	intel_de_write(i915, HSW_AUD_DIP_ELD_CTRL(cpu_transcoder), tmp);
 
-	/* Up to 84 bytes of hw ELD buffer */
-	len = min(drm_eld_size(eld), 84);
-	for (i = 0; i < len / 4; i++)
+	len = hsw_eld_buffer_size(i915, cpu_transcoder);
+	len = min(drm_eld_size(eld) / 4, len);
+
+	for (i = 0; i < len; i++)
 		intel_de_write(i915, HSW_AUD_EDID_DATA(cpu_transcoder),
 			       *((const u32 *)eld + i));
 
@@ -658,6 +679,19 @@ static void ilk_audio_regs_init(struct drm_i915_private *i915,
 	}
 }
 
+static int ilk_eld_buffer_size(struct drm_i915_private *i915,
+			       enum pipe pipe)
+{
+	struct ilk_audio_regs regs;
+	u32 tmp;
+
+	ilk_audio_regs_init(i915, pipe, &regs);
+
+	tmp = intel_de_read(i915, regs.aud_cntl_st);
+
+	return REG_FIELD_GET(IBX_ELD_BUFFER_SIZE_MASK, tmp);
+}
+
 static void ilk_audio_codec_disable(struct intel_encoder *encoder,
 				    const struct intel_crtc_state *old_crtc_state,
 				    const struct drm_connector_state *old_conn_state)
@@ -732,9 +766,10 @@ static void ilk_audio_codec_enable(struct intel_encoder *encoder,
 	tmp &= ~IBX_ELD_ADDRESS_MASK;
 	intel_de_write(i915, regs.aud_cntl_st, tmp);
 
-	/* Up to 84 bytes of hw ELD buffer */
-	len = min(drm_eld_size(eld), 84);
-	for (i = 0; i < len / 4; i++)
+	len = ilk_eld_buffer_size(i915, pipe);
+	len = min(drm_eld_size(eld) / 4, len);
+
+	for (i = 0; i < len; i++)
 		intel_de_write(i915, regs.hdmiw_hdmiedid,
 			       *((const u32 *)eld + i));
 
-- 
2.35.1


  parent reply	other threads:[~2022-10-11 17:01 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-11 16:59 [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Ville Syrjala
2022-10-11 16:59 ` [Intel-gfx] [PATCH 01/22] drm/i915/audio: s/dev_priv/i915/ Ville Syrjala
2022-10-12 14:35   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 02/22] drm/i915/audio: Nuke leftover ROUNDING_FACTOR Ville Syrjala
2022-10-12 14:36   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 03/22] drm/i915/audio: Remove CL/BLC audio stuff Ville Syrjala
2022-10-12 14:36   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 04/22] drm/i915/audio: Exract struct ilk_audio_regs Ville Syrjala
2022-10-12 14:36   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 05/22] drm/i915/audio: Use REG_BIT() & co Ville Syrjala
2022-10-12 14:37   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 06/22] drm/i915/audio: Unify register bit naming Ville Syrjala
2022-10-12 14:37   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 07/22] drm/i915/audio: Protect singleton register with a lock Ville Syrjala
2022-10-12 14:38   ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 08/22] drm/i915/audio: Nuke intel_eld_uptodate() Ville Syrjala
2022-10-12 14:40   ` Jani Nikula
2022-10-11 16:59 ` Ville Syrjala [this message]
2022-10-12 14:41   ` [Intel-gfx] [PATCH 09/22] drm/i915/audio: Read ELD buffer size from hardware Jani Nikula
2022-10-12 14:46     ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 10/22] drm/i915/audio: Make sure we write the whole ELD buffer Ville Syrjala
2022-10-12 14:28   ` Jani Nikula
2022-10-12 15:03     ` Ville Syrjälä
2022-10-12 16:06       ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 11/22] drm/i915/audio: Use u32* for ELD Ville Syrjala
2022-10-12 14:42   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 12/22] drm/i915/audio: Use intel_de_rmw() for most audio registers Ville Syrjala
2022-10-12 14:33   ` Jani Nikula
2022-10-12 15:05     ` Ville Syrjälä
2022-10-11 17:00 ` [Intel-gfx] [PATCH 13/22] drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+ Ville Syrjala
2022-10-12 15:01   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 14/22] drm/i915/audio: Do the vblank waits Ville Syrjala
2022-10-12 15:01   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 15/22] drm/i915/audio: Precompute the ELD Ville Syrjala
2022-10-12 15:11   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 16/22] drm/i915/audio: Hardware ELD readout Ville Syrjala
2022-10-12 15:19   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 17/22] drm/i915/sdvo: Extract intel_sdvo_has_audio() Ville Syrjala
2022-10-12 15:15   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 18/22] drm/i915/sdvo: Precompute the ELD Ville Syrjala
2022-10-12 15:16   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 19/22] drm/i915/sdvo: Do ELD hardware readout Ville Syrjala
2022-10-12 15:22   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 20/22] drm/i915/audio: Hook up ELD into the state checker Ville Syrjala
2022-10-12 15:25   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 21/22] drm/i915/audio: Include ELD in the state dump Ville Syrjala
2022-10-12 15:26   ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 22/22] hax: drm/i915/audio: Make HSW hardware ELD buffer sort of work Ville Syrjala
2022-10-12 10:49   ` [Intel-gfx] [PATCH v2 22/22] drm/i915/audio: Resume HSW/BDW HDA controller around ELD access Ville Syrjala
2022-10-12 11:08     ` Ville Syrjälä
2022-10-12 11:42     ` Kai Vehmanen
2022-10-12 13:53       ` Kai Vehmanen
2022-10-12 14:24     ` Ville Syrjälä
2022-10-19 18:06       ` Ville Syrjälä
2022-10-14 10:51     ` Kai Vehmanen
2022-10-19 18:43       ` Ville Syrjälä
2022-10-11 17:39 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Jani Nikula
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-11 21:00 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ELD precompute and readout (rev2) Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-12 12:58 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-14  9:03 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Borah, Chaitanya Kumar
2022-10-14  9:13   ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221011170011.17198-10-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox