From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: [Intel-gfx] [PATCH 03/22] drm/i915/audio: Remove CL/BLC audio stuff
Date: Tue, 11 Oct 2022 19:59:52 +0300 [thread overview]
Message-ID: <20221011170011.17198-4-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20221011170011.17198-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
We don't use the audio code on crestline (CL) since it doesn't
support native HDMI output, and SDVO has it's own way of doing
audio.
And Bearlake-C (BLC) doesn't even exist in the real world, so
no point it trying to deal with it.
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_audio.c | 23 ++++---------------
.../gpu/drm/i915/display/intel_audio_regs.h | 8 +------
2 files changed, 6 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c
index b6165bb57503..5517e0a6d868 100644
--- a/drivers/gpu/drm/i915/display/intel_audio.c
+++ b/drivers/gpu/drm/i915/display/intel_audio.c
@@ -336,17 +336,11 @@ static void g4x_audio_codec_disable(struct intel_encoder *encoder,
const struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- u32 eldv, tmp;
-
- tmp = intel_de_read(i915, G4X_AUD_VID_DID);
- if (tmp == INTEL_AUDIO_DEVBLC || tmp == INTEL_AUDIO_DEVCL)
- eldv = G4X_ELDV_DEVCL_DEVBLC;
- else
- eldv = G4X_ELDV_DEVCTG;
+ u32 tmp;
/* Invalidate ELD */
tmp = intel_de_read(i915, G4X_AUD_CNTL_ST);
- tmp &= ~eldv;
+ tmp &= ~G4X_ELDV;
intel_de_write(i915, G4X_AUD_CNTL_ST, tmp);
}
@@ -357,24 +351,17 @@ static void g4x_audio_codec_enable(struct intel_encoder *encoder,
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
struct drm_connector *connector = conn_state->connector;
const u8 *eld = connector->eld;
- u32 eldv;
u32 tmp;
int len, i;
- tmp = intel_de_read(i915, G4X_AUD_VID_DID);
- if (tmp == INTEL_AUDIO_DEVBLC || tmp == INTEL_AUDIO_DEVCL)
- eldv = G4X_ELDV_DEVCL_DEVBLC;
- else
- eldv = G4X_ELDV_DEVCTG;
-
if (intel_eld_uptodate(connector,
- G4X_AUD_CNTL_ST, eldv,
+ G4X_AUD_CNTL_ST, G4X_ELDV,
G4X_AUD_CNTL_ST, G4X_ELD_ADDR_MASK,
G4X_HDMIW_HDMIEDID))
return;
tmp = intel_de_read(i915, G4X_AUD_CNTL_ST);
- tmp &= ~(eldv | G4X_ELD_ADDR_MASK);
+ tmp &= ~(G4X_ELDV | G4X_ELD_ADDR_MASK);
len = (tmp >> 9) & 0x1f; /* ELD buffer size */
intel_de_write(i915, G4X_AUD_CNTL_ST, tmp);
@@ -384,7 +371,7 @@ static void g4x_audio_codec_enable(struct intel_encoder *encoder,
*((const u32 *)eld + i));
tmp = intel_de_read(i915, G4X_AUD_CNTL_ST);
- tmp |= eldv;
+ tmp |= G4X_ELDV;
intel_de_write(i915, G4X_AUD_CNTL_ST, tmp);
}
diff --git a/drivers/gpu/drm/i915/display/intel_audio_regs.h b/drivers/gpu/drm/i915/display/intel_audio_regs.h
index e25248cdac51..ebbdd0654919 100644
--- a/drivers/gpu/drm/i915/display/intel_audio_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_audio_regs.h
@@ -8,14 +8,8 @@
#include "i915_reg_defs.h"
-#define G4X_AUD_VID_DID _MMIO(DISPLAY_MMIO_BASE(i915) + 0x62020)
-#define INTEL_AUDIO_DEVCL 0x808629FB
-#define INTEL_AUDIO_DEVBLC 0x80862801
-#define INTEL_AUDIO_DEVCTG 0x80862802
-
#define G4X_AUD_CNTL_ST _MMIO(0x620B4)
-#define G4X_ELDV_DEVCL_DEVBLC (1 << 13)
-#define G4X_ELDV_DEVCTG (1 << 14)
+#define G4X_ELDV (1 << 14)
#define G4X_ELD_ADDR_MASK (0xf << 5)
#define G4X_ELD_ACK (1 << 4)
#define G4X_HDMIW_HDMIEDID _MMIO(0x6210C)
--
2.35.1
next prev parent reply other threads:[~2022-10-11 17:02 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 16:59 [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Ville Syrjala
2022-10-11 16:59 ` [Intel-gfx] [PATCH 01/22] drm/i915/audio: s/dev_priv/i915/ Ville Syrjala
2022-10-12 14:35 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 02/22] drm/i915/audio: Nuke leftover ROUNDING_FACTOR Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` Ville Syrjala [this message]
2022-10-12 14:36 ` [Intel-gfx] [PATCH 03/22] drm/i915/audio: Remove CL/BLC audio stuff Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 04/22] drm/i915/audio: Exract struct ilk_audio_regs Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 05/22] drm/i915/audio: Use REG_BIT() & co Ville Syrjala
2022-10-12 14:37 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 06/22] drm/i915/audio: Unify register bit naming Ville Syrjala
2022-10-12 14:37 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 07/22] drm/i915/audio: Protect singleton register with a lock Ville Syrjala
2022-10-12 14:38 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 08/22] drm/i915/audio: Nuke intel_eld_uptodate() Ville Syrjala
2022-10-12 14:40 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 09/22] drm/i915/audio: Read ELD buffer size from hardware Ville Syrjala
2022-10-12 14:41 ` Jani Nikula
2022-10-12 14:46 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 10/22] drm/i915/audio: Make sure we write the whole ELD buffer Ville Syrjala
2022-10-12 14:28 ` Jani Nikula
2022-10-12 15:03 ` Ville Syrjälä
2022-10-12 16:06 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 11/22] drm/i915/audio: Use u32* for ELD Ville Syrjala
2022-10-12 14:42 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 12/22] drm/i915/audio: Use intel_de_rmw() for most audio registers Ville Syrjala
2022-10-12 14:33 ` Jani Nikula
2022-10-12 15:05 ` Ville Syrjälä
2022-10-11 17:00 ` [Intel-gfx] [PATCH 13/22] drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+ Ville Syrjala
2022-10-12 15:01 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 14/22] drm/i915/audio: Do the vblank waits Ville Syrjala
2022-10-12 15:01 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 15/22] drm/i915/audio: Precompute the ELD Ville Syrjala
2022-10-12 15:11 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 16/22] drm/i915/audio: Hardware ELD readout Ville Syrjala
2022-10-12 15:19 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 17/22] drm/i915/sdvo: Extract intel_sdvo_has_audio() Ville Syrjala
2022-10-12 15:15 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 18/22] drm/i915/sdvo: Precompute the ELD Ville Syrjala
2022-10-12 15:16 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 19/22] drm/i915/sdvo: Do ELD hardware readout Ville Syrjala
2022-10-12 15:22 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 20/22] drm/i915/audio: Hook up ELD into the state checker Ville Syrjala
2022-10-12 15:25 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 21/22] drm/i915/audio: Include ELD in the state dump Ville Syrjala
2022-10-12 15:26 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 22/22] hax: drm/i915/audio: Make HSW hardware ELD buffer sort of work Ville Syrjala
2022-10-12 10:49 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/audio: Resume HSW/BDW HDA controller around ELD access Ville Syrjala
2022-10-12 11:08 ` Ville Syrjälä
2022-10-12 11:42 ` Kai Vehmanen
2022-10-12 13:53 ` Kai Vehmanen
2022-10-12 14:24 ` Ville Syrjälä
2022-10-19 18:06 ` Ville Syrjälä
2022-10-14 10:51 ` Kai Vehmanen
2022-10-19 18:43 ` Ville Syrjälä
2022-10-11 17:39 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Jani Nikula
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-11 21:00 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ELD precompute and readout (rev2) Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-12 12:58 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-14 9:03 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Borah, Chaitanya Kumar
2022-10-14 9:13 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011170011.17198-4-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox