From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: Re: [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout
Date: Tue, 11 Oct 2022 20:39:04 +0300 [thread overview]
Message-ID: <871qrexnt3.fsf@intel.com> (raw)
In-Reply-To: <20221011170011.17198-1-ville.syrjala@linux.intel.com>
On Tue, 11 Oct 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> There was some discussion around ELD precompute, so I
> decided to have a quick look at hooking that up. Unfortunately
> the i915 audio code is a bit of a mess so ended up with
> a patchbomb of cleanups. Sorry about that.
>
> The actually interesting stuff is at the end of the series.
> The precumpute+readot+state checker is pretty self explanatory
> stuff for the most part.
>
> But I think we need to decide what to do with the hardware
> ELD buffer in general. It's totally busted atm on HSW
> (and I'd expecpt BDW as well), but we had no idea since
> we had no readout+state checker for it.
>
> So do we try to salvage it (I guess to mainly act as some
> kind of "did we enable audio correctly?" canary) or do we
> just stop programming it outright? And on which platforms
> could we do that?
Quickly eyeballed through it all, overall looks good, but didn't do
detailed review. Ack.
Cc: Vinod too.
BR,
Jani.
>
> Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> Cc: Takashi Iwai <tiwai@suse.de>
>
> Ville Syrjälä (22):
> drm/i915/audio: s/dev_priv/i915/
> drm/i915/audio: Nuke leftover ROUNDING_FACTOR
> drm/i915/audio: Remove CL/BLC audio stuff
> drm/i915/audio: Exract struct ilk_audio_regs
> drm/i915/audio: Use REG_BIT() & co.
> drm/i915/audio: Unify register bit naming
> drm/i915/audio: Protect singleton register with a lock
> drm/i915/audio: Nuke intel_eld_uptodate()
> drm/i915/audio: Read ELD buffer size from hardware
> drm/i915/audio: Make sure we write the whole ELD buffer
> drm/i915/audio: Use u32* for ELD
> drm/i915/audio: Use intel_de_rmw() for most audio registers
> drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+
> drm/i915/audio: Do the vblank waits
> drm/i915/audio: Precompute the ELD
> drm/i915/audio: Hardware ELD readout
> drm/i915/sdvo: Extract intel_sdvo_has_audio()
> drm/i915/sdvo: Precompute the ELD
> drm/i915/sdvo: Do ELD hardware readout
> drm/i915/audio: Hook up ELD into the state checker
> drm/i915/audio: Include ELD in the state dump
> hax: drm/i915/audio: Make HSW hardware ELD buffer sort of work
>
> drivers/gpu/drm/i915/display/g4x_dp.c | 2 +
> drivers/gpu/drm/i915/display/g4x_hdmi.c | 2 +
> drivers/gpu/drm/i915/display/intel_audio.c | 792 ++++++++++--------
> drivers/gpu/drm/i915/display/intel_audio.h | 7 +
> .../gpu/drm/i915/display/intel_audio_regs.h | 88 +-
> .../drm/i915/display/intel_crtc_state_dump.c | 17 +
> drivers/gpu/drm/i915/display/intel_ddi.c | 2 +
> drivers/gpu/drm/i915/display/intel_display.c | 43 +
> .../drm/i915/display/intel_display_types.h | 2 +
> drivers/gpu/drm/i915/display/intel_dp.c | 4 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 4 +-
> drivers/gpu/drm/i915/display/intel_sdvo.c | 54 +-
> 12 files changed, 608 insertions(+), 409 deletions(-)
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2022-10-11 17:39 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 16:59 [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Ville Syrjala
2022-10-11 16:59 ` [Intel-gfx] [PATCH 01/22] drm/i915/audio: s/dev_priv/i915/ Ville Syrjala
2022-10-12 14:35 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 02/22] drm/i915/audio: Nuke leftover ROUNDING_FACTOR Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 03/22] drm/i915/audio: Remove CL/BLC audio stuff Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 04/22] drm/i915/audio: Exract struct ilk_audio_regs Ville Syrjala
2022-10-12 14:36 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 05/22] drm/i915/audio: Use REG_BIT() & co Ville Syrjala
2022-10-12 14:37 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 06/22] drm/i915/audio: Unify register bit naming Ville Syrjala
2022-10-12 14:37 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 07/22] drm/i915/audio: Protect singleton register with a lock Ville Syrjala
2022-10-12 14:38 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 08/22] drm/i915/audio: Nuke intel_eld_uptodate() Ville Syrjala
2022-10-12 14:40 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 09/22] drm/i915/audio: Read ELD buffer size from hardware Ville Syrjala
2022-10-12 14:41 ` Jani Nikula
2022-10-12 14:46 ` Jani Nikula
2022-10-11 16:59 ` [Intel-gfx] [PATCH 10/22] drm/i915/audio: Make sure we write the whole ELD buffer Ville Syrjala
2022-10-12 14:28 ` Jani Nikula
2022-10-12 15:03 ` Ville Syrjälä
2022-10-12 16:06 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 11/22] drm/i915/audio: Use u32* for ELD Ville Syrjala
2022-10-12 14:42 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 12/22] drm/i915/audio: Use intel_de_rmw() for most audio registers Ville Syrjala
2022-10-12 14:33 ` Jani Nikula
2022-10-12 15:05 ` Ville Syrjälä
2022-10-11 17:00 ` [Intel-gfx] [PATCH 13/22] drm/i915/audio: Split "ELD valid" vs. audio PD on hsw+ Ville Syrjala
2022-10-12 15:01 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 14/22] drm/i915/audio: Do the vblank waits Ville Syrjala
2022-10-12 15:01 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 15/22] drm/i915/audio: Precompute the ELD Ville Syrjala
2022-10-12 15:11 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 16/22] drm/i915/audio: Hardware ELD readout Ville Syrjala
2022-10-12 15:19 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 17/22] drm/i915/sdvo: Extract intel_sdvo_has_audio() Ville Syrjala
2022-10-12 15:15 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 18/22] drm/i915/sdvo: Precompute the ELD Ville Syrjala
2022-10-12 15:16 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 19/22] drm/i915/sdvo: Do ELD hardware readout Ville Syrjala
2022-10-12 15:22 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 20/22] drm/i915/audio: Hook up ELD into the state checker Ville Syrjala
2022-10-12 15:25 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 21/22] drm/i915/audio: Include ELD in the state dump Ville Syrjala
2022-10-12 15:26 ` Jani Nikula
2022-10-11 17:00 ` [Intel-gfx] [PATCH 22/22] hax: drm/i915/audio: Make HSW hardware ELD buffer sort of work Ville Syrjala
2022-10-12 10:49 ` [Intel-gfx] [PATCH v2 22/22] drm/i915/audio: Resume HSW/BDW HDA controller around ELD access Ville Syrjala
2022-10-12 11:08 ` Ville Syrjälä
2022-10-12 11:42 ` Kai Vehmanen
2022-10-12 13:53 ` Kai Vehmanen
2022-10-12 14:24 ` Ville Syrjälä
2022-10-19 18:06 ` Ville Syrjälä
2022-10-14 10:51 ` Kai Vehmanen
2022-10-19 18:43 ` Ville Syrjälä
2022-10-11 17:39 ` Jani Nikula [this message]
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ELD precompute and readout Patchwork
2022-10-11 20:38 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-11 21:00 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ELD precompute and readout (rev2) Patchwork
2022-10-12 12:33 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-10-12 12:58 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-10-14 9:03 ` [Intel-gfx] [PATCH 00/22] drm/i915: ELD precompute and readout Borah, Chaitanya Kumar
2022-10-14 9:13 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871qrexnt3.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tiwai@suse.de \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox