From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>,
Shekhar Chauhan <shekhar.chauhan@intel.com>,
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>,
Matt Roper <matthew.d.roper@intel.com>,
Tejas Upadhyay <tejas.upadhyay@intel.com>
Subject: [PATCH v2 21/22] drm/xe/xe3p_xpc: Setup PAT table
Date: Wed, 15 Oct 2025 15:06:36 -0700 [thread overview]
Message-ID: <20251015-xe3p-v2-21-b9189b3056a2@intel.com> (raw)
In-Reply-To: <20251015-xe3p-v2-0-b9189b3056a2@intel.com>
From: Matt Roper <matthew.d.roper@intel.com>
Xe3p_XPC IP requires a new PAT table; note that this table has one fewer
column than the Xe2/Xe3 tables since compression is not supported.
There's also no "WT" entry (which we wouldn't have used on a platform
without display anyway).
Bspec: 71582
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
drivers/gpu/drm/xe/xe_pat.c | 96 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 95 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/xe/xe_pat.c b/drivers/gpu/drm/xe/xe_pat.c
index 6e48ff84ad0a0..7649b554942aa 100644
--- a/drivers/gpu/drm/xe/xe_pat.c
+++ b/drivers/gpu/drm/xe/xe_pat.c
@@ -154,6 +154,41 @@ static const struct xe_pat_table_entry xe2_pat_table[] = {
static const struct xe_pat_table_entry xe2_pat_ats = XE2_PAT( 0, 0, 0, 0, 3, 3 );
static const struct xe_pat_table_entry xe2_pat_pta = XE2_PAT( 0, 0, 0, 0, 3, 0 );
+/*
+ * Xe3p_XPC PAT table uses the same layout as Xe2/Xe3, except that there's no
+ * option for compression. Also note that the "L3" and "L4" register fields
+ * actually control L2 and L3 cache respectively on this platform.
+ */
+#define XE3P_XPC_PAT(no_promote, l3clos, l3_policy, l4_policy, __coh_mode) \
+ XE2_PAT(no_promote, 0, l3clos, l3_policy, l4_policy, __coh_mode)
+
+static const struct xe_pat_table_entry xe3p_xpc_pat_ats = XE3P_XPC_PAT( 0, 0, 0, 0, 3 );
+static const struct xe_pat_table_entry xe3p_xpc_pat_pta = XE3P_XPC_PAT( 0, 0, 0, 0, 0 );
+
+static const struct xe_pat_table_entry xe3p_xpc_pat_table[] = {
+ [ 0] = XE3P_XPC_PAT( 0, 0, 0, 0, 0 ),
+ [ 1] = XE3P_XPC_PAT( 0, 0, 0, 0, 2 ),
+ [ 2] = XE3P_XPC_PAT( 0, 0, 0, 0, 3 ),
+ [ 3] = XE3P_XPC_PAT( 0, 0, 3, 3, 0 ),
+ [ 4] = XE3P_XPC_PAT( 0, 0, 3, 3, 2 ),
+ [ 5] = XE3P_XPC_PAT( 0, 0, 3, 0, 0 ),
+ [ 6] = XE3P_XPC_PAT( 0, 0, 3, 0, 2 ),
+ [ 7] = XE3P_XPC_PAT( 0, 0, 3, 0, 3 ),
+ [ 8] = XE3P_XPC_PAT( 0, 0, 0, 3, 0 ),
+ [ 9] = XE3P_XPC_PAT( 0, 0, 0, 3, 2 ),
+ [10] = XE3P_XPC_PAT( 0, 0, 0, 3, 3 ),
+ /* 11..22 are reserved; leave set to all 0's */
+ [23] = XE3P_XPC_PAT( 0, 1, 0, 0, 0 ),
+ [24] = XE3P_XPC_PAT( 0, 1, 0, 0, 2 ),
+ [25] = XE3P_XPC_PAT( 0, 1, 0, 0, 3 ),
+ [26] = XE3P_XPC_PAT( 0, 2, 0, 0, 0 ),
+ [27] = XE3P_XPC_PAT( 0, 2, 0, 0, 2 ),
+ [28] = XE3P_XPC_PAT( 0, 2, 0, 0, 3 ),
+ [29] = XE3P_XPC_PAT( 0, 3, 0, 0, 0 ),
+ [30] = XE3P_XPC_PAT( 0, 3, 0, 0, 2 ),
+ [31] = XE3P_XPC_PAT( 0, 3, 0, 0, 3 ),
+};
+
u16 xe_pat_index_get_coh_mode(struct xe_device *xe, u16 pat_index)
{
WARN_ON(pat_index >= xe->pat.n_entries);
@@ -380,9 +415,68 @@ static const struct xe_pat_ops xe2_pat_ops = {
.dump = xe2_dump,
};
+static int xe3p_xpc_dump(struct xe_gt *gt, struct drm_printer *p)
+{
+ struct xe_device *xe = gt_to_xe(gt);
+ unsigned int fw_ref;
+ u32 pat;
+ int i;
+
+ fw_ref = xe_force_wake_get(gt_to_fw(gt), XE_FW_GT);
+ if (!fw_ref)
+ return -ETIMEDOUT;
+
+ drm_printf(p, "PAT table:\n");
+
+ for (i = 0; i < xe->pat.n_entries; i++) {
+ pat = xe_gt_mcr_unicast_read_any(gt, XE_REG_MCR(_PAT_INDEX(i)));
+
+ drm_printf(p, "PAT[%2d] = [ %u, %u, %u, %u, %u ] (%#8x)\n", i,
+ !!(pat & XE2_NO_PROMOTE),
+ REG_FIELD_GET(XE2_L3_CLOS, pat),
+ REG_FIELD_GET(XE2_L3_POLICY, pat),
+ REG_FIELD_GET(XE2_L4_POLICY, pat),
+ REG_FIELD_GET(XE2_COH_MODE, pat),
+ pat);
+ }
+
+ /*
+ * Also print PTA_MODE, which describes how the hardware accesses
+ * PPGTT entries.
+ */
+ pat = xe_gt_mcr_unicast_read_any(gt, XE_REG_MCR(_PAT_PTA));
+
+ drm_printf(p, "Page Table Access:\n");
+ drm_printf(p, "PTA_MODE= [ %u, %u, %u, %u, %u ] (%#8x)\n",
+ !!(pat & XE2_NO_PROMOTE),
+ REG_FIELD_GET(XE2_L3_CLOS, pat),
+ REG_FIELD_GET(XE2_L3_POLICY, pat),
+ REG_FIELD_GET(XE2_L4_POLICY, pat),
+ REG_FIELD_GET(XE2_COH_MODE, pat),
+ pat);
+
+ xe_force_wake_put(gt_to_fw(gt), fw_ref);
+ return 0;
+}
+
+static const struct xe_pat_ops xe3p_xpc_pat_ops = {
+ .program_graphics = program_pat_mcr,
+ .program_media = program_pat,
+ .dump = xe3p_xpc_dump,
+};
+
void xe_pat_init_early(struct xe_device *xe)
{
- if (GRAPHICS_VER(xe) == 30 || GRAPHICS_VER(xe) == 20) {
+ if (GRAPHICS_VERx100(xe) == 3511) {
+ xe->pat.ops = &xe3p_xpc_pat_ops;
+ xe->pat.table = xe3p_xpc_pat_table;
+ xe->pat.pat_ats = &xe3p_xpc_pat_ats;
+ xe->pat.pat_pta = &xe3p_xpc_pat_pta;
+ xe->pat.n_entries = ARRAY_SIZE(xe3p_xpc_pat_table);
+ xe->pat.idx[XE_CACHE_NONE] = 3;
+ xe->pat.idx[XE_CACHE_WT] = 3; /* N/A (no display); use UC */
+ xe->pat.idx[XE_CACHE_WB] = 2;
+ } else if (GRAPHICS_VER(xe) == 30 || GRAPHICS_VER(xe) == 20) {
xe->pat.ops = &xe2_pat_ops;
xe->pat.table = xe2_pat_table;
xe->pat.pat_ats = &xe2_pat_ats;
--
2.51.0
next prev parent reply other threads:[~2025-10-15 22:07 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 22:06 [PATCH v2 00/22] drm/xe: Add Xe3p support Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 01/22] drm/xe/xe3: Add support for graphics IP versions 30.04 & 30.05 Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 02/22] drm/xe/xe3p_lpm: Add support for media IP versions 35.00 & 35.03 Lucas De Marchi
2025-10-16 16:12 ` Gustavo Sousa
2025-10-16 16:46 ` Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 03/22] drm/xe: Drop CTC_MODE register read Lucas De Marchi
2025-10-15 23:26 ` Matt Roper
2025-10-15 22:06 ` [PATCH v2 04/22] drm/xe: Add GT_VER() to check version specific to gt type Lucas De Marchi
2025-10-15 23:34 ` Matt Roper
2025-10-15 22:06 ` [PATCH v2 05/22] drm/xe/xe3p_lpm: Skip disabling NOA on unsupported IPs Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 06/22] drm/xe/xe3p_lpm: Handle MCR steering Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 07/22] drm/xe/xe3p: Stop programming RCU_MODE's fixed slice mode setting Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 08/22] drm/xe/xe3p: Determine service copy availability from fuse Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 09/22] drm/xe: Dump CURRENT_LRCA register Lucas De Marchi
2025-10-15 23:28 ` Matt Roper
2025-10-15 22:06 ` [PATCH v2 10/22] drm/xe/xe3p: Dump CSMQDEBUG register Lucas De Marchi
2025-10-15 23:33 ` Matt Roper
2025-10-15 22:06 ` [PATCH v2 11/22] drm/xe/nvl: Define NVL-S platform Lucas De Marchi
2025-10-16 16:41 ` Gustavo Sousa
2025-10-15 22:06 ` [PATCH v2 12/22] drm/xe/nvls: Define GuC firmware for NVL-S Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 13/22] drm/xe/nvls: Attach MOCS table " Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 14/22] drm/xe/xe3p_xpc: Add Xe3p_XPC IP definition Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 15/22] drm/xe/xe3p_xpc: Add L3 bank mask Lucas De Marchi
2025-10-15 23:29 ` Matt Roper
2025-10-15 22:06 ` [PATCH v2 16/22] drm/xe/xe3p_xpc: Add MCR steering Lucas De Marchi
2025-10-16 11:44 ` Gustavo Sousa
2025-10-16 19:48 ` Lucas De Marchi
2025-10-16 20:16 ` Gustavo Sousa
2025-10-15 22:06 ` [PATCH v2 17/22] drm/xe/irq: Rename fuse mask variables Lucas De Marchi
2025-10-15 23:39 ` Matt Roper
2025-10-15 22:06 ` [PATCH v2 18/22] drm/xe/irq: Split irq mask per engine class Lucas De Marchi
2025-10-15 23:52 ` Matt Roper
2025-10-16 4:38 ` Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 19/22] drm/xe/xe3p_xpc: Add support for compute walker for non-MSIx Lucas De Marchi
2025-10-16 0:07 ` Matt Roper
2025-10-16 5:33 ` Lucas De Marchi
2025-10-16 6:52 ` Muqthyar Ahmed, Syed Abdul
2025-10-16 13:59 ` Lucas De Marchi
2025-10-17 6:52 ` Joonas Lahtinen
2025-10-15 22:06 ` [PATCH v2 20/22] drm/xe/xe3p_xpc: Skip compression tuning on platforms without flatccs Lucas De Marchi
2025-10-16 12:30 ` Gustavo Sousa
2025-10-16 16:54 ` Matt Roper
2025-10-15 22:06 ` Lucas De Marchi [this message]
2025-10-16 14:30 ` [PATCH v2 21/22] drm/xe/xe3p_xpc: Setup PAT table Vivekanandan, Balasubramani
2025-10-16 20:22 ` Lucas De Marchi
2025-10-15 22:06 ` [PATCH v2 22/22] drm/xe/xe3p: Add xe3p EU stall data format Lucas De Marchi
2025-10-15 23:58 ` Dixit, Ashutosh
2025-10-16 3:25 ` Lucas De Marchi
2025-10-16 5:11 ` ✗ CI.checkpatch: warning for drm/xe: Add Xe3p support (rev2) Patchwork
2025-10-16 5:13 ` ✓ CI.KUnit: success " Patchwork
2025-10-16 5:55 ` ✗ Xe.CI.BAT: failure " Patchwork
2025-10-16 23:29 ` ✗ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251015-xe3p-v2-21-b9189b3056a2@intel.com \
--to=lucas.demarchi@intel.com \
--cc=balasubramani.vivekanandan@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
--cc=shekhar.chauhan@intel.com \
--cc=tejas.upadhyay@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox