Re: [PATCH v2 21/22] drm/xe/xe3p_xpc: Setup PAT table

["Vivekanandan, Balasubramani" <balasubramani.vivekanandan@intel.com>]

On 15.10.2025 15:06, Lucas De Marchi wrote:
> From: Matt Roper <matthew.d.roper@intel.com>
> 
> Xe3p_XPC IP requires a new PAT table; note that this table has one fewer
> column than the Xe2/Xe3 tables since compression is not supported.
> There's also no "WT" entry (which we wouldn't have used on a platform
> without display anyway).
> 
> Bspec: 71582
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
> ---
>  drivers/gpu/drm/xe/xe_pat.c | 96 ++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 95 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/xe/xe_pat.c b/drivers/gpu/drm/xe/xe_pat.c
> index 6e48ff84ad0a0..7649b554942aa 100644
> --- a/drivers/gpu/drm/xe/xe_pat.c
> +++ b/drivers/gpu/drm/xe/xe_pat.c
> @@ -154,6 +154,41 @@ static const struct xe_pat_table_entry xe2_pat_table[] = {
>  static const struct xe_pat_table_entry xe2_pat_ats = XE2_PAT( 0, 0, 0, 0, 3, 3 );
>  static const struct xe_pat_table_entry xe2_pat_pta = XE2_PAT( 0, 0, 0, 0, 3, 0 );
>  
> +/*
> + * Xe3p_XPC PAT table uses the same layout as Xe2/Xe3, except that there's no
> + * option for compression.  Also note that the "L3" and "L4" register fields
> + * actually control L2 and L3 cache respectively on this platform.
> + */
> +#define XE3P_XPC_PAT(no_promote, l3clos, l3_policy, l4_policy, __coh_mode) \
> +	XE2_PAT(no_promote, 0, l3clos, l3_policy, l4_policy, __coh_mode)
> +
> +static const struct xe_pat_table_entry xe3p_xpc_pat_ats = XE3P_XPC_PAT( 0, 0, 0, 0, 3 );
> +static const struct xe_pat_table_entry xe3p_xpc_pat_pta = XE3P_XPC_PAT( 0, 0, 0, 0, 0 );
> +
> +static const struct xe_pat_table_entry xe3p_xpc_pat_table[] = {
> +	[ 0] = XE3P_XPC_PAT( 0, 0, 0, 0, 0 ),
> +	[ 1] = XE3P_XPC_PAT( 0, 0, 0, 0, 2 ),
> +	[ 2] = XE3P_XPC_PAT( 0, 0, 0, 0, 3 ),
> +	[ 3] = XE3P_XPC_PAT( 0, 0, 3, 3, 0 ),
> +	[ 4] = XE3P_XPC_PAT( 0, 0, 3, 3, 2 ),
> +	[ 5] = XE3P_XPC_PAT( 0, 0, 3, 0, 0 ),
> +	[ 6] = XE3P_XPC_PAT( 0, 0, 3, 0, 2 ),
> +	[ 7] = XE3P_XPC_PAT( 0, 0, 3, 0, 3 ),
> +	[ 8] = XE3P_XPC_PAT( 0, 0, 0, 3, 0 ),
> +	[ 9] = XE3P_XPC_PAT( 0, 0, 0, 3, 2 ),
> +	[10] = XE3P_XPC_PAT( 0, 0, 0, 3, 3 ),
> +	/* 11..22 are reserved; leave set to all 0's */
> +	[23] = XE3P_XPC_PAT( 0, 1, 0, 0, 0 ),
> +	[24] = XE3P_XPC_PAT( 0, 1, 0, 0, 2 ),
> +	[25] = XE3P_XPC_PAT( 0, 1, 0, 0, 3 ),
> +	[26] = XE3P_XPC_PAT( 0, 2, 0, 0, 0 ),
> +	[27] = XE3P_XPC_PAT( 0, 2, 0, 0, 2 ),
> +	[28] = XE3P_XPC_PAT( 0, 2, 0, 0, 3 ),
> +	[29] = XE3P_XPC_PAT( 0, 3, 0, 0, 0 ),
> +	[30] = XE3P_XPC_PAT( 0, 3, 0, 0, 2 ),
> +	[31] = XE3P_XPC_PAT( 0, 3, 0, 0, 3 ),
> +};
> +
>  u16 xe_pat_index_get_coh_mode(struct xe_device *xe, u16 pat_index)
>  {
>  	WARN_ON(pat_index >= xe->pat.n_entries);
> @@ -380,9 +415,68 @@ static const struct xe_pat_ops xe2_pat_ops = {
>  	.dump = xe2_dump,
>  };
>  
> +static int xe3p_xpc_dump(struct xe_gt *gt, struct drm_printer *p)
> +{
> +	struct xe_device *xe = gt_to_xe(gt);
> +	unsigned int fw_ref;
> +	u32 pat;
> +	int i;
> +
> +	fw_ref = xe_force_wake_get(gt_to_fw(gt), XE_FW_GT);
> +	if (!fw_ref)
> +		return -ETIMEDOUT;
> +
> +	drm_printf(p, "PAT table:\n");
> +
> +	for (i = 0; i < xe->pat.n_entries; i++) {
> +		pat = xe_gt_mcr_unicast_read_any(gt, XE_REG_MCR(_PAT_INDEX(i)));
> +
> +		drm_printf(p, "PAT[%2d] = [ %u, %u, %u, %u, %u ]  (%#8x)\n", i,
> +			   !!(pat & XE2_NO_PROMOTE),
> +			   REG_FIELD_GET(XE2_L3_CLOS, pat),
> +			   REG_FIELD_GET(XE2_L3_POLICY, pat),
> +			   REG_FIELD_GET(XE2_L4_POLICY, pat),
> +			   REG_FIELD_GET(XE2_COH_MODE, pat),
> +			   pat);
> +	}
> +
> +	/*
> +	 * Also print PTA_MODE, which describes how the hardware accesses
> +	 * PPGTT entries.
> +	 */
> +	pat = xe_gt_mcr_unicast_read_any(gt, XE_REG_MCR(_PAT_PTA));
> +
> +	drm_printf(p, "Page Table Access:\n");
> +	drm_printf(p, "PTA_MODE= [ %u, %u, %u, %u, %u ]  (%#8x)\n",
> +		   !!(pat & XE2_NO_PROMOTE),
> +		   REG_FIELD_GET(XE2_L3_CLOS, pat),
> +		   REG_FIELD_GET(XE2_L3_POLICY, pat),
> +		   REG_FIELD_GET(XE2_L4_POLICY, pat),
> +		   REG_FIELD_GET(XE2_COH_MODE, pat),
> +		   pat);

< Resending what was already sent to v1 by mistake. >

For completeness, we can print the _PTA_ATS register also.
Outside that, patch LGTM.

Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>

> +
> +	xe_force_wake_put(gt_to_fw(gt), fw_ref);
> +	return 0;
> +}
> +
> +static const struct xe_pat_ops xe3p_xpc_pat_ops = {
> +	.program_graphics = program_pat_mcr,
> +	.program_media = program_pat,
> +	.dump = xe3p_xpc_dump,
> +};
> +
>  void xe_pat_init_early(struct xe_device *xe)
>  {
> -	if (GRAPHICS_VER(xe) == 30 || GRAPHICS_VER(xe) == 20) {
> +	if (GRAPHICS_VERx100(xe) == 3511) {
> +		xe->pat.ops = &xe3p_xpc_pat_ops;
> +		xe->pat.table = xe3p_xpc_pat_table;
> +		xe->pat.pat_ats = &xe3p_xpc_pat_ats;
> +		xe->pat.pat_pta = &xe3p_xpc_pat_pta;
> +		xe->pat.n_entries = ARRAY_SIZE(xe3p_xpc_pat_table);
> +		xe->pat.idx[XE_CACHE_NONE] = 3;
> +		xe->pat.idx[XE_CACHE_WT] = 3;	/* N/A (no display); use UC */
> +		xe->pat.idx[XE_CACHE_WB] = 2;
> +	} else if (GRAPHICS_VER(xe) == 30 || GRAPHICS_VER(xe) == 20) {
>  		xe->pat.ops = &xe2_pat_ops;
>  		xe->pat.table = xe2_pat_table;
>  		xe->pat.pat_ats = &xe2_pat_ats;
> 
> -- 
> 2.51.0
>