From: Dave Jiang <dave.jiang@intel.com>
To: Dan Williams <dan.j.williams@intel.com>, linux-cxl@vger.kernel.org
Cc: Alejandro Lucero <alucerop@amd.com>,
Ira Weiny <ira.weiny@intel.com>,
Jonathan.Cameron@huawei.com
Subject: Re: [PATCH v2 3/5] cxl: Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
Date: Thu, 23 Jan 2025 09:57:29 -0700 [thread overview]
Message-ID: <528d920d-bc37-490d-8f9a-48592abfc215@intel.com> (raw)
In-Reply-To: <173753636727.3849855.464861650807086965.stgit@dwillia2-xfh.jf.intel.com>
On 1/22/25 1:59 AM, Dan Williams wrote:
> The pending efforts to add CXL Accelerator (type-2) device [1], and
> Dynamic Capacity (DCD) support [2], tripped on the
> no-longer-fit-for-purpose design in the CXL subsystem for tracking
> device-physical-address (DPA) metadata. Trip hazards include:
>
> - CXL Memory Devices need to consider a PMEM partition, but Accelerator
> devices with CXL.mem likely do not in the common case.
>
> - CXL Memory Devices enumerate DPA through Memory Device mailbox
> commands like Partition Info, Accelerators devices do not.
>
> - CXL Memory Devices that support DCD support more than 2 partitions.
> Some of the driver algorithms are awkward to expand to > 2 partition
> cases.
>
> - DPA performance data is a general capability that can be shared with
> accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
> suitable.
>
> - Hardcoded assumptions around the PMEM partition always being index-1
> if RAM is zero-sized or PMEM is zero sized.
>
> - 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
> memory property, it should be phased in favor of a partition id and
> the memory property comes from the partition info.
>
> Towards cleaning up those issues and allowing a smoother landing for the
> aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
> array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
> way for Memory Devices and Accelerators to initialize the DPA information
> in 'struct cxl_dev_state'.
>
> For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
> get the new data structure initialized, and cleanup some qos_class init.
> Follow on patches will go further to use the new data structure to
> cleanup algorithms that are better suited to loop over all possible
> partitions.
>
> cxl_dpa_setup() follows the locking expectations of mutating the device
> DPA map, and is suitable for Accelerator drivers to use. Accelerators
> likely only have one hardcoded 'ram' partition to convey to the
> cxl_core.
>
> Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
> Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
> Cc: Dave Jiang <dave.jiang@intel.com>
> Cc: Alejandro Lucero <alucerop@amd.com>
> Cc: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
> drivers/cxl/core/cdat.c | 15 ++-----
> drivers/cxl/core/hdm.c | 75 +++++++++++++++++++++++++++++++++-
> drivers/cxl/core/mbox.c | 68 ++++++++++--------------------
> drivers/cxl/core/memdev.c | 2 -
> drivers/cxl/cxlmem.h | 94 +++++++++++++++++++++++++++++-------------
> drivers/cxl/pci.c | 7 +++
> tools/testing/cxl/test/cxl.c | 15 ++-----
> tools/testing/cxl/test/mem.c | 7 +++
> 8 files changed, 183 insertions(+), 100 deletions(-)
>
> diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c
> index b177a488e29b..5400a421ad30 100644
> --- a/drivers/cxl/core/cdat.c
> +++ b/drivers/cxl/core/cdat.c
> @@ -261,25 +261,18 @@ static void cxl_memdev_set_qos_class(struct cxl_dev_state *cxlds,
> struct device *dev = cxlds->dev;
> struct dsmas_entry *dent;
> unsigned long index;
> - const struct resource *partition[] = {
> - to_ram_res(cxlds),
> - to_pmem_res(cxlds),
> - };
> - struct cxl_dpa_perf *perf[] = {
> - to_ram_perf(cxlds),
> - to_pmem_perf(cxlds),
> - };
>
> xa_for_each(dsmas_xa, index, dent) {
> - for (int i = 0; i < ARRAY_SIZE(partition); i++) {
> - const struct resource *res = partition[i];
> + for (int i = 0; i < cxlds->nr_partitions; i++) {
> + struct resource *res = &cxlds->part[i].res;
> struct range range = {
> .start = res->start,
> .end = res->end,
> };
>
> if (range_contains(&range, &dent->dpa_range))
> - update_perf_entry(dev, dent, perf[i]);
> + update_perf_entry(dev, dent,
> + &cxlds->part[i].perf);
> else
> dev_dbg(dev,
> "no partition for dsmas dpa: %pra\n",
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index 7a85522294ad..3f8a54ca4624 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -327,9 +327,9 @@ static int __cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
> cxled->dpa_res = res;
> cxled->skip = skipped;
>
> - if (resource_contains(to_pmem_res(cxlds), res))
> + if (to_pmem_res(cxlds) && resource_contains(to_pmem_res(cxlds), res))
> cxled->mode = CXL_DECODER_PMEM;
> - else if (resource_contains(to_ram_res(cxlds), res))
> + else if (to_ram_res(cxlds) && resource_contains(to_ram_res(cxlds), res))
> cxled->mode = CXL_DECODER_RAM;
> else {
> dev_warn(dev, "decoder%d.%d: %pr does not map any partition\n",
> @@ -342,6 +342,77 @@ static int __cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
> return 0;
> }
>
> +static int add_dpa_res(struct device *dev, struct resource *parent,
> + struct resource *res, resource_size_t start,
> + resource_size_t size, const char *type)
> +{
> + int rc;
> +
> + *res = (struct resource) {
> + .name = type,
> + .start = start,
> + .end = start + size - 1,
> + .flags = IORESOURCE_MEM,
> + };
> + if (resource_size(res) == 0) {
> + dev_dbg(dev, "DPA(%s): no capacity\n", res->name);
> + return 0;
> + }
> + rc = request_resource(parent, res);
> + if (rc) {
> + dev_err(dev, "DPA(%s): failed to track %pr (%d)\n", res->name,
> + res, rc);
> + return rc;
> + }
> +
> + dev_dbg(dev, "DPA(%s): %pr\n", res->name, res);
> +
> + return 0;
> +}
> +
> +/* if this fails the caller must destroy @cxlds, there is no recovery */
> +int cxl_dpa_setup(struct cxl_dev_state *cxlds, const struct cxl_dpa_info *info)
> +{
> + struct device *dev = cxlds->dev;
> +
> + guard(rwsem_write)(&cxl_dpa_rwsem);
> +
> + if (cxlds->nr_partitions)
> + return -EBUSY;
> +
> + if (!info->size || !info->nr_partitions) {
> + cxlds->dpa_res = DEFINE_RES_MEM(0, 0);
> + cxlds->nr_partitions = 0;
> + return 0;
> + }
> +
> + cxlds->dpa_res = DEFINE_RES_MEM(0, info->size);
> +
> + for (int i = 0; i < info->nr_partitions; i++) {
> + const struct cxl_dpa_part_info *part = &info->part[i];
> + const char *desc;
> + int rc;
> +
> + if (part->mode == CXL_PARTMODE_RAM)
> + desc = "ram";
> + else if (part->mode == CXL_PARTMODE_PMEM)
> + desc = "pmem";
> + else
> + desc = "";
> + cxlds->part[i].perf.qos_class = CXL_QOS_CLASS_INVALID;
> + cxlds->part[i].mode = part->mode;
> + rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->part[i].res,
> + part->range.start, range_len(&part->range),
> + desc);
> + if (rc)
> + return rc;
> + cxlds->nr_partitions++;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(cxl_dpa_setup);
> +
> int devm_cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
> resource_size_t base, resource_size_t len,
> resource_size_t skipped)
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 3502f1633ad2..62bb3653362f 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -1241,57 +1241,39 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)
> return rc;
> }
>
> -static int add_dpa_res(struct device *dev, struct resource *parent,
> - struct resource *res, resource_size_t start,
> - resource_size_t size, const char *type)
> +static void add_part(struct cxl_dpa_info *info, u64 start, u64 size, enum cxl_partition_mode mode)
> {
> - int rc;
> + int i = info->nr_partitions;
>
> - res->name = type;
> - res->start = start;
> - res->end = start + size - 1;
> - res->flags = IORESOURCE_MEM;
> - if (resource_size(res) == 0) {
> - dev_dbg(dev, "DPA(%s): no capacity\n", res->name);
> - return 0;
> - }
> - rc = request_resource(parent, res);
> - if (rc) {
> - dev_err(dev, "DPA(%s): failed to track %pr (%d)\n", res->name,
> - res, rc);
> - return rc;
> - }
> -
> - dev_dbg(dev, "DPA(%s): %pr\n", res->name, res);
> + if (size == 0)
> + return;
>
> - return 0;
> + info->part[i].range = (struct range) {
> + .start = start,
> + .end = start + size - 1,
> + };
> + info->part[i].mode = mode;
> + info->nr_partitions++;
> }
>
> -int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
> +int cxl_mem_dpa_fetch(struct cxl_memdev_state *mds, struct cxl_dpa_info *info)
> {
> struct cxl_dev_state *cxlds = &mds->cxlds;
> - struct resource *ram_res = to_ram_res(cxlds);
> - struct resource *pmem_res = to_pmem_res(cxlds);
> struct device *dev = cxlds->dev;
> int rc;
>
> if (!cxlds->media_ready) {
> - cxlds->dpa_res = DEFINE_RES_MEM(0, 0);
> - *ram_res = DEFINE_RES_MEM(0, 0);
> - *pmem_res = DEFINE_RES_MEM(0, 0);
> + info->size = 0;
> return 0;
> }
>
> - cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes);
> + info->size = mds->total_bytes;
>
> if (mds->partition_align_bytes == 0) {
> - rc = add_dpa_res(dev, &cxlds->dpa_res, ram_res, 0,
> - mds->volatile_only_bytes, "ram");
> - if (rc)
> - return rc;
> - return add_dpa_res(dev, &cxlds->dpa_res, pmem_res,
> - mds->volatile_only_bytes,
> - mds->persistent_only_bytes, "pmem");
> + add_part(info, 0, mds->volatile_only_bytes, CXL_PARTMODE_RAM);
> + add_part(info, mds->volatile_only_bytes,
> + mds->persistent_only_bytes, CXL_PARTMODE_PMEM);
> + return 0;
> }
>
> rc = cxl_mem_get_partition_info(mds);
> @@ -1300,15 +1282,13 @@ int cxl_mem_create_range_info(struct cxl_memdev_state *mds)
> return rc;
> }
>
> - rc = add_dpa_res(dev, &cxlds->dpa_res, ram_res, 0,
> - mds->active_volatile_bytes, "ram");
> - if (rc)
> - return rc;
> - return add_dpa_res(dev, &cxlds->dpa_res, pmem_res,
> - mds->active_volatile_bytes,
> - mds->active_persistent_bytes, "pmem");
> + add_part(info, 0, mds->active_volatile_bytes, CXL_PARTMODE_RAM);
> + add_part(info, mds->active_volatile_bytes, mds->active_persistent_bytes,
> + CXL_PARTMODE_PMEM);
> +
> + return 0;
> }
> -EXPORT_SYMBOL_NS_GPL(cxl_mem_create_range_info, "CXL");
> +EXPORT_SYMBOL_NS_GPL(cxl_mem_dpa_fetch, "CXL");
>
> int cxl_set_timestamp(struct cxl_memdev_state *mds)
> {
> @@ -1452,8 +1432,6 @@ struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev)
> mds->cxlds.reg_map.host = dev;
> mds->cxlds.reg_map.resource = CXL_RESOURCE_NONE;
> mds->cxlds.type = CXL_DEVTYPE_CLASSMEM;
> - to_ram_perf(&mds->cxlds)->qos_class = CXL_QOS_CLASS_INVALID;
> - to_pmem_perf(&mds->cxlds)->qos_class = CXL_QOS_CLASS_INVALID;
>
> return mds;
> }
> diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
> index c5f8320ed330..be0eb57086e1 100644
> --- a/drivers/cxl/core/memdev.c
> +++ b/drivers/cxl/core/memdev.c
> @@ -80,7 +80,7 @@ static ssize_t ram_size_show(struct device *dev, struct device_attribute *attr,
> {
> struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
> struct cxl_dev_state *cxlds = cxlmd->cxlds;
> - unsigned long long len = resource_size(to_ram_res(cxlds));
> + unsigned long long len = cxl_ram_size(cxlds);
>
> return sysfs_emit(buf, "%#llx\n", len);
> }
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 78e92e24d7b5..15f549afab7c 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -97,6 +97,25 @@ int devm_cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
> resource_size_t base, resource_size_t len,
> resource_size_t skipped);
>
> +enum cxl_partition_mode {
> + CXL_PARTMODE_NONE,
> + CXL_PARTMODE_RAM,
> + CXL_PARTMODE_PMEM,
> +};
> +
> +#define CXL_NR_PARTITIONS_MAX 2
> +
> +struct cxl_dpa_info {
> + u64 size;
> + struct cxl_dpa_part_info {
> + struct range range;
> + enum cxl_partition_mode mode;
> + } part[CXL_NR_PARTITIONS_MAX];
> + int nr_partitions;
> +};
> +
> +int cxl_dpa_setup(struct cxl_dev_state *cxlds, const struct cxl_dpa_info *info);
> +
> static inline struct cxl_ep *cxl_ep_load(struct cxl_port *port,
> struct cxl_memdev *cxlmd)
> {
> @@ -408,6 +427,18 @@ struct cxl_dpa_perf {
> int qos_class;
> };
>
> +/**
> + * struct cxl_dpa_partition - DPA partition descriptor
> + * @res: shortcut to the partition in the DPA resource tree (cxlds->dpa_res)
> + * @perf: performance attributes of the partition from CDAT
> + * @mode: operation mode for the DPA capacity, e.g. ram, pmem, dynamic...
> + */
> +struct cxl_dpa_partition {
> + struct resource res;
> + struct cxl_dpa_perf perf;
> + enum cxl_partition_mode mode;
> +};
> +
> /**
> * struct cxl_dev_state - The driver device state
> *
> @@ -423,8 +454,8 @@ struct cxl_dpa_perf {
> * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
> * @media_ready: Indicate whether the device media is usable
> * @dpa_res: Overall DPA resource tree for the device
> - * @_pmem_res: Active Persistent memory capacity configuration
> - * @_ram_res: Active Volatile memory capacity configuration
> + * @part: DPA partition array
> + * @nr_partitions: Number of DPA partitions
> * @serial: PCIe Device Serial Number
> * @type: Generic Memory Class device or Vendor Specific Memory device
> * @cxl_mbox: CXL mailbox context
> @@ -438,21 +469,47 @@ struct cxl_dev_state {
> bool rcd;
> bool media_ready;
> struct resource dpa_res;
> - struct resource _pmem_res;
> - struct resource _ram_res;
> + struct cxl_dpa_partition part[CXL_NR_PARTITIONS_MAX];
> + unsigned int nr_partitions;
> u64 serial;
> enum cxl_devtype type;
> struct cxl_mailbox cxl_mbox;
> };
>
> -static inline struct resource *to_ram_res(struct cxl_dev_state *cxlds)
> +
> +/* Static RAM is only expected at partition 0. */
> +static inline const struct resource *to_ram_res(struct cxl_dev_state *cxlds)
> +{
> + if (cxlds->part[0].mode != CXL_PARTMODE_RAM)
> + return NULL;
> + return &cxlds->part[0].res;
> +}
> +
> +/*
> + * Static PMEM may be at partition index 0 when there is no static RAM
> + * capacity.
> + */
> +static inline const struct resource *to_pmem_res(struct cxl_dev_state *cxlds)
> +{
> + for (int i = 0; i < cxlds->nr_partitions; i++)
> + if (cxlds->part[i].mode == CXL_PARTMODE_PMEM)
> + return &cxlds->part[i].res;
> + return NULL;
> +}
> +
> +static inline struct cxl_dpa_perf *to_ram_perf(struct cxl_dev_state *cxlds)
> {
> - return &cxlds->_ram_res;
> + if (cxlds->part[0].mode != CXL_PARTMODE_RAM)
> + return NULL;
> + return &cxlds->part[0].perf;
> }
>
> -static inline struct resource *to_pmem_res(struct cxl_dev_state *cxlds)
> +static inline struct cxl_dpa_perf *to_pmem_perf(struct cxl_dev_state *cxlds)
> {
> - return &cxlds->_pmem_res;
> + for (int i = 0; i < cxlds->nr_partitions; i++)
> + if (cxlds->part[i].mode == CXL_PARTMODE_PMEM)
> + return &cxlds->part[i].perf;
> + return NULL;
> }
>
> static inline resource_size_t cxl_ram_size(struct cxl_dev_state *cxlds)
> @@ -499,8 +556,6 @@ static inline struct cxl_dev_state *mbox_to_cxlds(struct cxl_mailbox *cxl_mbox)
> * @active_persistent_bytes: sum of hard + soft persistent
> * @next_volatile_bytes: volatile capacity change pending device reset
> * @next_persistent_bytes: persistent capacity change pending device reset
> - * @_ram_perf: performance data entry matched to RAM partition
> - * @_pmem_perf: performance data entry matched to PMEM partition
> * @event: event log driver state
> * @poison: poison driver state info
> * @security: security driver state info
> @@ -524,29 +579,12 @@ struct cxl_memdev_state {
> u64 next_volatile_bytes;
> u64 next_persistent_bytes;
>
> - struct cxl_dpa_perf _ram_perf;
> - struct cxl_dpa_perf _pmem_perf;
> -
> struct cxl_event_state event;
> struct cxl_poison_state poison;
> struct cxl_security_state security;
> struct cxl_fw_state fw;
> };
>
> -static inline struct cxl_dpa_perf *to_ram_perf(struct cxl_dev_state *cxlds)
> -{
> - struct cxl_memdev_state *mds = container_of(cxlds, typeof(*mds), cxlds);
> -
> - return &mds->_ram_perf;
> -}
> -
> -static inline struct cxl_dpa_perf *to_pmem_perf(struct cxl_dev_state *cxlds)
> -{
> - struct cxl_memdev_state *mds = container_of(cxlds, typeof(*mds), cxlds);
> -
> - return &mds->_pmem_perf;
> -}
> -
> static inline struct cxl_memdev_state *
> to_cxl_memdev_state(struct cxl_dev_state *cxlds)
> {
> @@ -860,7 +898,7 @@ int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> int cxl_await_media_ready(struct cxl_dev_state *cxlds);
> int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
> -int cxl_mem_create_range_info(struct cxl_memdev_state *mds);
> +int cxl_mem_dpa_fetch(struct cxl_memdev_state *mds, struct cxl_dpa_info *info);
> struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev);
> void set_exclusive_cxl_commands(struct cxl_memdev_state *mds,
> unsigned long *cmds);
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 0241d1d7133a..47dbfe406236 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -900,6 +900,7 @@ __ATTRIBUTE_GROUPS(cxl_rcd);
> static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> {
> struct pci_host_bridge *host_bridge = pci_find_host_bridge(pdev->bus);
> + struct cxl_dpa_info range_info = { 0 };
> struct cxl_memdev_state *mds;
> struct cxl_dev_state *cxlds;
> struct cxl_register_map map;
> @@ -989,7 +990,11 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> if (rc)
> return rc;
>
> - rc = cxl_mem_create_range_info(mds);
> + rc = cxl_mem_dpa_fetch(mds, &range_info);
> + if (rc)
> + return rc;
> +
> + rc = cxl_dpa_setup(cxlds, &range_info);
> if (rc)
> return rc;
>
> diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c
> index 7f1c5061307b..ba3d48b37de3 100644
> --- a/tools/testing/cxl/test/cxl.c
> +++ b/tools/testing/cxl/test/cxl.c
> @@ -1001,26 +1001,19 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)
> struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev);
> struct cxl_dev_state *cxlds = cxlmd->cxlds;
> struct access_coordinate ep_c[ACCESS_COORDINATE_MAX];
> - const struct resource *partition[] = {
> - to_ram_res(cxlds),
> - to_pmem_res(cxlds),
> - };
> - struct cxl_dpa_perf *perf[] = {
> - to_ram_perf(cxlds),
> - to_pmem_perf(cxlds),
> - };
>
> if (!cxl_root)
> return;
>
> - for (int i = 0; i < ARRAY_SIZE(partition); i++) {
> - const struct resource *res = partition[i];
> + for (int i = 0; i < cxlds->nr_partitions; i++) {
> + struct resource *res = &cxlds->part[i].res;
> + struct cxl_dpa_perf *perf = &cxlds->part[i].perf;
> struct range range = {
> .start = res->start,
> .end = res->end,
> };
>
> - dpa_perf_setup(port, &range, perf[i]);
> + dpa_perf_setup(port, &range, perf);
> }
>
> cxl_memdev_update_perf(cxlmd);
> diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
> index 347c1e7b37bd..ed365e083c8f 100644
> --- a/tools/testing/cxl/test/mem.c
> +++ b/tools/testing/cxl/test/mem.c
> @@ -1477,6 +1477,7 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
> struct cxl_dev_state *cxlds;
> struct cxl_mockmem_data *mdata;
> struct cxl_mailbox *cxl_mbox;
> + struct cxl_dpa_info range_info = { 0 };
> int rc;
>
> mdata = devm_kzalloc(dev, sizeof(*mdata), GFP_KERNEL);
> @@ -1537,7 +1538,11 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
> if (rc)
> return rc;
>
> - rc = cxl_mem_create_range_info(mds);
> + rc = cxl_mem_dpa_fetch(mds, &range_info);
> + if (rc)
> + return rc;
> +
> + rc = cxl_dpa_setup(cxlds, &range_info);
> if (rc)
> return rc;
>
>
next prev parent reply other threads:[~2025-01-23 16:57 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-22 8:59 [PATCH v2 0/5] cxl: DPA partition metadata is a mess Dan Williams
2025-01-22 8:59 ` [PATCH v2 1/5] cxl: Remove the CXL_DECODER_MIXED mistake Dan Williams
2025-01-22 14:11 ` Ira Weiny
2025-01-23 15:49 ` Jonathan Cameron
2025-01-23 15:58 ` Alejandro Lucero Palau
2025-01-23 16:03 ` Dave Jiang
2025-01-22 8:59 ` [PATCH v2 2/5] cxl: Introduce to_{ram,pmem}_{res,perf}() helpers Dan Williams
2025-01-22 14:18 ` Ira Weiny
2025-01-23 15:57 ` Jonathan Cameron
2025-01-23 20:01 ` Dan Williams
2025-01-23 16:13 ` Dave Jiang
2025-01-23 16:25 ` Alejandro Lucero Palau
2025-01-23 21:04 ` Dan Williams
2025-01-24 10:15 ` Alejandro Lucero Palau
2025-01-25 0:45 ` Dan Williams
2025-01-22 8:59 ` [PATCH v2 3/5] cxl: Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info' Dan Williams
2025-01-22 14:53 ` Ira Weiny
2025-01-22 22:24 ` Dan Williams
2025-01-23 3:10 ` Ira Weiny
2025-01-23 16:09 ` Jonathan Cameron
2025-01-23 20:24 ` Dan Williams
2025-01-23 16:57 ` Dave Jiang [this message]
2025-01-23 17:00 ` Alejandro Lucero Palau
2025-01-23 22:43 ` Dan Williams
2025-01-23 17:17 ` Alejandro Lucero Palau
2025-01-23 22:48 ` Dan Williams
2025-01-24 10:29 ` Alejandro Lucero Palau
2025-01-22 8:59 ` [PATCH v2 4/5] cxl: Make cxl_dpa_alloc() DPA partition number agnostic Dan Williams
2025-01-22 16:29 ` Ira Weiny
2025-01-22 22:35 ` Dan Williams
2025-01-23 3:14 ` Ira Weiny
2025-01-23 3:28 ` Dan Williams
2025-01-23 16:41 ` Jonathan Cameron
2025-01-23 21:34 ` Dan Williams
2025-01-23 17:21 ` Alejandro Lucero Palau
2025-01-23 20:52 ` Dave Jiang
2025-01-22 8:59 ` [PATCH v2 5/5] cxl: Kill enum cxl_decoder_mode Dan Williams
2025-01-22 17:42 ` Ira Weiny
2025-01-22 22:58 ` Dan Williams
2025-01-23 3:39 ` Ira Weiny
2025-01-23 4:11 ` Dan Williams
2025-01-23 21:30 ` Dave Jiang
2025-01-24 22:22 ` Ira Weiny
2025-01-23 16:51 ` Jonathan Cameron
2025-01-23 21:50 ` Dan Williams
2025-01-23 17:20 ` Alejandro Lucero Palau
2025-01-23 21:29 ` Dave Jiang
2025-01-23 17:23 ` [PATCH v2 0/5] cxl: DPA partition metadata is a mess Alejandro Lucero Palau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=528d920d-bc37-490d-8f9a-48592abfc215@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alucerop@amd.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox