* Re: Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
@ 2003-11-13 3:14 ` Matt Chapman
2003-11-13 12:32 ` Yu, Luming
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Matt Chapman @ 2003-11-13 3:14 UTC (permalink / raw)
To: linux-ia64
It boots fine on Lion here, it looks like you might be using the wrong config?
The config you attached is for ZX1/McKinley.
Matt
On Wed, Nov 12, 2003 at 07:37:22PM +0800, Yu, Luming wrote:
> ACPI Test Report for 2.6 ia64 kernel
> ============> Hardware Configuration:
> -----------------------
> System Name: ACPI-LION
> System Type: 4 way 800M Itanium, Lion
> M/B revision: N/A
> Processor version: N/A
> Firmware Versions: N/A
> I/O configuration summary:
> QLogic QLA12160, Seagate ST39205LC boot drive
> IDE floppy and CDROM
> Serial console
> PS/2 keyboard and mouse
> USB mouse
> Ethernet Pro 100
>
> Software Configuration:
> -----------------------
> 1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/11 (Shanghai time)
>
> Successfully automerged by bk without out any manually work.
>
> ACPI Features Tested: (prioritized).
> --------------------
> 1. Boot hang
>
> Kernel hang after message:
> <<2.6.config.ZIP>>
> "ELILO boot : Loading vmlinux... Done"
>
> Thanks,
> Luming
>
^ permalink raw reply [flat|nested] 10+ messages in thread* RE: Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
2003-11-13 3:14 ` Matt Chapman
@ 2003-11-13 12:32 ` Yu, Luming
2003-11-19 12:42 ` Yu, Luming
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-11-13 12:32 UTC (permalink / raw)
To: linux-ia64
I double-checked my config file. You are right. After correcting this mistake, I can successfully boot 2.6 on lion.
Thanks
Luming
-----Original Message-----
From: linux-ia64-owner@vger.kernel.org [mailto:linux-ia64-owner@vger.kernel.org]On Behalf Of Matt Chapman
Sent: 2003?11?13? 11:14
To: Yu, Luming
Cc: linux-acpi; linux-ia64@vger.kernel.org
Subject: Re: Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang)
It boots fine on Lion here, it looks like you might be using the wrong config?
The config you attached is for ZX1/McKinley.
Matt
On Wed, Nov 12, 2003 at 07:37:22PM +0800, Yu, Luming wrote:
> ACPI Test Report for 2.6 ia64 kernel
> ============> Hardware Configuration:
> -----------------------
> System Name: ACPI-LION
> System Type: 4 way 800M Itanium, Lion
> M/B revision: N/A
> Processor version: N/A
> Firmware Versions: N/A
> I/O configuration summary:
> QLogic QLA12160, Seagate ST39205LC boot drive
> IDE floppy and CDROM
> Serial console
> PS/2 keyboard and mouse
> USB mouse
> Ethernet Pro 100
>
> Software Configuration:
> -----------------------
> 1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/11 (Shanghai time)
>
> Successfully automerged by bk without out any manually work.
>
> ACPI Features Tested: (prioritized).
> --------------------
> 1. Boot hang
>
> Kernel hang after message:
> <<2.6.config.ZIP>>
> "ELILO boot : Loading vmlinux... Done"
>
> Thanks,
> Luming
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread* Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
2003-11-13 3:14 ` Matt Chapman
2003-11-13 12:32 ` Yu, Luming
@ 2003-11-19 12:42 ` Yu, Luming
2003-11-19 12:46 ` Latest 2.6 IA64 Baseline (Mosberger) testing report Yu, Luming
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-11-19 12:42 UTC (permalink / raw)
To: linux-ia64
[-- Attachment #1: Type: text/plain, Size: 3031 bytes --]
ACPI Test Report for 2.6 ia64 kernel
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive
IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
-----------------------
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/19 (Shanghai time)
2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 11/19 (Shanghai time)
Successfully automerged by bk without out any manually work.
3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve kernel unaligned access when pressing power button
ACPI Features Tested: (prioritized).
--------------------
1. Boot tested ok
2. serial console tested ok
3. PS/2 keyboard only work for a few minutes, then hang
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse tested ok
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
29: 0 0 0 0 LSAPIC cmc_poll
30: 0 0 0 0 IO-SAPIC-level cpe_hndlr
31: 0 0 0 0 LSAPIC cmc_hndlr
32: 724 4 32 0 IO-SAPIC-edge i8042
33: 493 0 9 0 IO-SAPIC-edge ide1
34: 34 0 4 0 IO-SAPIC-edge ide0
36: 777 31 46 0 IO-SAPIC-edge i8042
39: 2 0 0 0 IO-SAPIC-level acpi
44: 16 0 3 0 IO-SAPIC-edge serial
45: 14 0 3 0 IO-SAPIC-edge serial
54: 1656 9 78 2 IO-SAPIC-level uhci_hcd
55: 1032 5 55 1 IO-SAPIC-level eth0
61: 5520 13 279 1 IO-SAPIC-level qla1280
232: 0 0 0 0 LSAPIC mca_rdzv
238: 0 0 0 0 LSAPIC perfmon
239: 354543 349871 349425 348988 LSAPIC timer
240: 0 0 0 0 LSAPIC mca_wkup
254: 154 126 218 183 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
Problems:
1. PS/2 keyboard only work for a few minutes, then hang.
2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed. (known issue)
3.ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3. (Known issue)
<<dmesg.26.ZIP>> <<2.6.config.ZIP>> <<lspci.26.ZIP>>
Thanks,
Luming
[-- Attachment #2: dmesg.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5254 bytes --]
[-- Attachment #3: 2.6.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5437 bytes --]
[-- Attachment #4: lspci.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1200 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* RE: Latest 2.6 IA64 Baseline (Mosberger) testing report
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
` (2 preceding siblings ...)
2003-11-19 12:42 ` Yu, Luming
@ 2003-11-19 12:46 ` Yu, Luming
2003-11-26 14:08 ` Yu, Luming
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-11-19 12:46 UTC (permalink / raw)
To: linux-ia64
It boot with any hang, but Leagcy keyboard hang. --Luming
> -----Original Message-----
> From: Yu, Luming
> Sent: 2003Äê11ÔÂ19ÈÕ 20:43
> To: linux-acpi
> Cc: linux-ia64@vger.kernel.org
> Subject: Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang)
>
> ACPI Test Report for 2.6 ia64 kernel
> ============> Hardware Configuration:
> -----------------------
> System Name: ACPI-LION
> System Type: 4 way 800M Itanium, Lion
> M/B revision: N/A
> Processor version: N/A
> Firmware Versions: N/A
> I/O configuration summary:
> QLogic QLA12160, Seagate ST39205LC boot drive
> IDE floppy and CDROM
> Serial console
> PS/2 keyboard and mouse
> USB mouse
> Ethernet Pro 100
>
> Software Configuration:
> -----------------------
> 1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/19 (Shanghai time)
> 2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 11/19 (Shanghai time)
> Successfully automerged by bk without out any manually work.
>
> 3. patch from http://bugzilla.kernel.org/show_bug.cgi?id\x1533 to solve kernel unaligned access when pressing power button
>
>
> ACPI Features Tested: (prioritized).
> --------------------
> 1. Boot tested ok
> 2. serial console tested ok
> 3. PS/2 keyboard only work for a few minutes, then hang
> 4. ATI (run X window system) tested ok
> 5. PS/2 mouse tested ok
> 6. USB mouse tested ok
> 7. NIC (eg. Ping or ftp) tested ok
> 8. IDE (eg. r/w floppy or CDROM) tested ok
> 9. SCI (eg. Press power button) tested ok
> 10. Soft Power off tested ok
>
> CPU0 CPU1 CPU2 CPU3
> 29: 0 0 0 0 LSAPIC cmc_poll
> 30: 0 0 0 0 IO-SAPIC-level cpe_hndlr
> 31: 0 0 0 0 LSAPIC cmc_hndlr
> 32: 724 4 32 0 IO-SAPIC-edge i8042
> 33: 493 0 9 0 IO-SAPIC-edge ide1
> 34: 34 0 4 0 IO-SAPIC-edge ide0
> 36: 777 31 46 0 IO-SAPIC-edge i8042
> 39: 2 0 0 0 IO-SAPIC-level acpi
> 44: 16 0 3 0 IO-SAPIC-edge serial
> 45: 14 0 3 0 IO-SAPIC-edge serial
> 54: 1656 9 78 2 IO-SAPIC-level uhci_hcd
> 55: 1032 5 55 1 IO-SAPIC-level eth0
> 61: 5520 13 279 1 IO-SAPIC-level qla1280
> 232: 0 0 0 0 LSAPIC mca_rdzv
> 238: 0 0 0 0 LSAPIC perfmon
> 239: 354543 349871 349425 348988 LSAPIC timer
> 240: 0 0 0 0 LSAPIC mca_wkup
> 254: 154 126 218 183 LSAPIC IPI
> NMI: 0 0 0 0
> ERR: 0
>
> Problems:
>
> 1. PS/2 keyboard only work for a few minutes, then hang.
>
> 2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed. (known issue)
>
> 3.ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3. (Known issue)
>
> << File: dmesg.26.TXT (Compressed) >> << File: 2.6.config.TXT (Compressed) >> << File: lspci.26.TXT (Compressed) >>
> Thanks,
> Luming
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread* Latest 2.6 IA64 Baseline (Mosberger) testing report
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
` (3 preceding siblings ...)
2003-11-19 12:46 ` Latest 2.6 IA64 Baseline (Mosberger) testing report Yu, Luming
@ 2003-11-26 14:08 ` Yu, Luming
2003-12-03 13:17 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Lion) Yu, Luming
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-11-26 14:08 UTC (permalink / raw)
To: linux-ia64
[-- Attachment #1: Type: text/plain, Size: 2998 bytes --]
ACPI Test Report for 2.6 ia64 kernel
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive
IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 11/26 (Shanghai time)
2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 11/26 (Shanghai time)
failed.
3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve kernel unaligned access when pressing power button
ACPI Features Tested: (prioritized).
--------------------
1. Boot tested ok
2. serial console Didn't test
3. PS/2 keyboard tested ok
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse tested ok
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
29: 0 0 0 0 LSAPIC cmc_poll
30: 0 0 0 0 IO-SAPIC-level cpe_hndlr
31: 0 0 0 0 LSAPIC cmc_hndlr
32: 1379 4 0 10 IO-SAPIC-edge i8042
33: 583 19 0 11 IO-SAPIC-edge ide1
34: 22 10 0 6 IO-SAPIC-edge ide0
36: 565 1 0 53 IO-SAPIC-edge i8042
39: 5 0 0 0 IO-SAPIC-level acpi
45: 11 5 0 0 IO-SAPIC-edge serial
54: 2415 4 0 0 IO-SAPIC-level uhci_hcd
55: 2958 46 4 2 IO-SAPIC-level eth0
61: 9152 320 3 15 IO-SAPIC-level qla1280
232: 0 0 0 0 LSAPIC mca_rdzv
238: 0 0 0 0 LSAPIC perfmon
239: 1899520 1894834 1889372 1883893 LSAPIC timer
240: 0 0 0 0 LSAPIC mca_wkup
254: 84 135 109 128 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
Problems:
1. Failed to bk pull http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 , Error message was
" Entire repository is locked by:
RESYNC directory.
ERROR-Unable to lock repository for update"
2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 0000:00 failed. (known issue)
3.ACPI: No IRQ known for interrupt pin B of device 0000:00:03.3. (Known issue)
<<2.6.config.ZIP>> <<dmesg.26.ZIP>> <<lspci.26.ZIP>>
Thanks
Luming
[-- Attachment #2: 2.6.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5437 bytes --]
[-- Attachment #3: dmesg.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5409 bytes --]
[-- Attachment #4: lspci.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1191 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Latest 2.6 IA64 Baseline (Mosberger) testing report (Lion)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
` (4 preceding siblings ...)
2003-11-26 14:08 ` Yu, Luming
@ 2003-12-03 13:17 ` Yu, Luming
2003-12-03 14:35 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Tiger) Yu, Luming
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-12-03 13:17 UTC (permalink / raw)
To: linux-ia64
[-- Attachment #1: Type: text/plain, Size: 3130 bytes --]
ACPI Test Report for 2.6 ia64 kernel
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive
IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 12/3 (Shanghai time)
2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 12/3 (Shanghai time)
3.patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533 to solve kernel unaligned access when pressing power button
Resolved 1 conflict by hand.(Take change from linux-ia64-2.5)
ACPI Features Tested: (prioritized).
--------------------
1. Boot tested ok
2. serial console tested ok
3. PS/2 keyboard After about 5 minutes, keyboard doesn't respond.
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse tested ok
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
29: 0 0 0 0 LSAPIC cmc_poll
30: 0 0 0 0 IO-SAPIC-level cpe_hndlr
31: 0 0 0 0 LSAPIC cmc_hndlr
32: 1407 2 10 21 IO-SAPIC-edge i8042
33: 638 0 0 2 IO-SAPIC-edge ide1
34: 12 0 12 14 IO-SAPIC-edge ide0
36: 465 32 21 0 IO-SAPIC-edge i8042
39: 4 0 0 0 IO-SAPIC-level acpi
44: 6 0 0 2 IO-SAPIC-edge serial
45: 15 0 0 2 IO-SAPIC-edge serial
54: 2082 4 30 0 IO-SAPIC-level uhci_hcd
55: 2184 0 28 52 IO-SAPIC-level eth0
61: 8850 1 15 279 IO-SAPIC-level qla1280
232: 0 0 0 0 LSAPIC mca_rdzv
238: 0 0 0 0 LSAPIC perfmon
239: 727038 722365 716577 711104 LSAPIC timer
240: 0 0 0 0 LSAPIC mca_wkup
254: 141 165 273 267 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
Problems:
1.After login about 5 minutes, keyboard doesn't respond.
2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)
3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed (Known issue)
4. ide-floppy: hda: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0
ide-floppy: hda: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0
<<lspci.26.ZIP>> <<dmesg.26.ZIP>> <<2.6.config.ZIP>>
Thanks,
Luming
[-- Attachment #2: lspci.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1191 bytes --]
[-- Attachment #3: dmesg.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5430 bytes --]
[-- Attachment #4: 2.6.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5437 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Latest 2.6 IA64 Baseline (Mosberger) testing report (Tiger)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
` (5 preceding siblings ...)
2003-12-03 13:17 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Lion) Yu, Luming
@ 2003-12-03 14:35 ` Yu, Luming
2003-12-10 9:55 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Lion) Yu, Luming
2003-12-10 10:06 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Tiger) Yu, Luming
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-12-03 14:35 UTC (permalink / raw)
To: linux-ia64
[-- Attachment #1: Type: text/plain, Size: 2663 bytes --]
ACPI Test Report for 2.6 ia64 kernel
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
MPT scsi host driver
Seagate ST318406LC boot drive
IDE floppy and CDROM
Serial console
USB mouse
Ethernet Pro 1000
Software Configuration:
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 12/3 (Shanghai time)
2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 12/3 (Shanghai time)
3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1634 to fix compile-time bug.
Resolved 1 conflict by hand.(Take change from linux-ia64-2.5)
ACPI Features Tested: (prioritized).
--------------------
1. Boot tested ok
2. serial console tested ok
3. ATI (run X window system) tested ok
4. PS/2 mouse tested ok
5. USB mouse tested ok
6. NIC (eg. Ping or ftp) tested ok
7. IDE (eg. r/w floppy or CDROM) tested ok
8. SCI (eg. Press power button) tested ok
9. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
29: 0 0 0 0 LSAPIC cmc_poll
30: 0 0 0 0 IO-SAPIC-level cpe_hndlr
31: 0 0 0 0 LSAPIC cmc_hndlr
34: 1 0 63 0 IO-SAPIC-edge ide0
39: 0 0 4 0 IO-SAPIC-level acpi
45: 0 1 94 0 IO-SAPIC-edge serial
48: 0 0 0 0 IO-SAPIC-level ehci_hcd
49: 1 24 1812 0 IO-SAPIC-level uhci_hcd
50: 0 0 40 0 IO-SAPIC-level uhci_hcd
51: 0 2 399 0 IO-SAPIC-level eth0
56: 7 128 3828 0 IO-SAPIC-level ioc0
57: 0 0 42 0 IO-SAPIC-level ioc1
232: 0 0 0 0 LSAPIC mca_rdzv
238: 0 0 0 0 LSAPIC perfmon
239: 203826 198715 198222 197807 LSAPIC timer
240: 0 0 0 0 LSAPIC mca_wkup
254: 34 94 87 91 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
Problems:
Please refer dmesg attached .
[Dmesg, /proc/interrupts, lspci -v , .config are attached below]
<<2.6.ZIP>>
Thanks,
Luming
[-- Attachment #2: 2.6.ZIP --]
[-- Type: application/x-zip-compressed, Size: 12898 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Latest 2.6 IA64 Baseline (Mosberger) testing report (Lion)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
` (6 preceding siblings ...)
2003-12-03 14:35 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Tiger) Yu, Luming
@ 2003-12-10 9:55 ` Yu, Luming
2003-12-10 10:06 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Tiger) Yu, Luming
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-12-10 9:55 UTC (permalink / raw)
To: linux-ia64
[-- Attachment #1: Type: text/plain, Size: 2735 bytes --]
ACPI Test Report for 2.6 ia64 kernel
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
QLogic QLA12160, Seagate ST39205LC boot drive
IDE floppy and CDROM
Serial console
PS/2 keyboard and mouse
USB mouse
Ethernet Pro 100
Software Configuration:
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 12/10 (Shanghai time)
Nothing to pull
2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 12/10 (Shanghai time)
Nothing to pull
Since nothing to pull, test result is quite like previous testing report.
ACPI Features Tested: (prioritized).
--------------------
1. Boot tested ok
2. serial console tested ok
3. PS/2 keyboard tested ok
4. ATI (run X window system) tested ok
5. PS/2 mouse tested ok
6. USB mouse tested ok
7. NIC (eg. Ping or ftp) tested ok
8. IDE (eg. r/w floppy or CDROM) tested ok
9. SCI (eg. Press power button) tested ok
10. Soft Power off tested ok
CPU0 CPU1 CPU2 CPU3
29: 0 0 0 0 LSAPIC cmc_poll
30: 0 0 0 0 IO-SAPIC-level cpe_hndlr
31: 0 0 0 0 LSAPIC cmc_hndlr
32: 888 11 0 0 IO-SAPIC-edge i8042
33: 214 6 0 0 IO-SAPIC-edge ide1
34: 35 3 0 0 IO-SAPIC-edge ide0
36: 2527 100 9 16 IO-SAPIC-edge i8042
39: 4 0 0 0 IO-SAPIC-level acpi
45: 14 2 0 0 IO-SAPIC-edge serial
54: 621 34 0 0 IO-SAPIC-level uhci_hcd
55: 215 2 1 1 IO-SAPIC-level eth0
61: 5059 185 2 16 IO-SAPIC-level qla1280
232: 0 0 0 0 LSAPIC mca_rdzv
238: 0 0 0 0 LSAPIC perfmon
239: 260134 255454 255013 254565 LSAPIC timer
240: 0 0 0 0 LSAPIC mca_wkup
254: 37 116 119 124 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
Problems:
1.PCI: no interrupt route for 00:00:03 pin B. (Known issue)
2.alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed (Known issue)
<<dmesg.26.ZIP>> <<lspci.26.ZIP>> <<2.6.config.ZIP>>
[-- Attachment #2: dmesg.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5797 bytes --]
[-- Attachment #3: lspci.26.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1193 bytes --]
[-- Attachment #4: 2.6.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5437 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Latest 2.6 IA64 Baseline (Mosberger) testing report (Tiger)
2003-11-12 11:37 Latest 2.6 IA64 Baseline (Mosberger) testing report (Boot hang) Yu, Luming
` (7 preceding siblings ...)
2003-12-10 9:55 ` Latest 2.6 IA64 Baseline (Mosberger) testing report (Lion) Yu, Luming
@ 2003-12-10 10:06 ` Yu, Luming
8 siblings, 0 replies; 10+ messages in thread
From: Yu, Luming @ 2003-12-10 10:06 UTC (permalink / raw)
To: linux-ia64
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 2270 bytes --]
ACPI Test Report for 2.6 ia64 kernel
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
MPT scsi host driver
Seagate ST318406LC boot drive
IDE floppy and CDROM
Serial console
USB mouse
USB keyboard
Ethernet Pro 1000
Software Configuration:
1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.5 on 12/10(Shanghai time)
Nothing to pull
2.bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.6.0 on 12/10 (Shanghai time)
Nothing to pull
3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1634 to fix compile-time bug.
Auto-merged without any manual work.
ACPI Features Tested: (prioritized).
--------------------
1. Boot tested ok
2. serial console tested ok
3. ATI (run X window system) tested ok
4. usb keyboard tested ok
5. USB mouse tested ok
6. NIC (eg. Ping or ftp) tested ok
7. IDE (eg. r/w floppy or CDROM) tested ok
8. SCI (eg. Press power button) tested ok
9. Soft Power off tested ok
€€€€€€€€€€€€€€€€€ CPU0 CPU1 CPU2 CPU3
34: 1 0 0 63 IO-SAPIC-edge ide0
39: 0 0 0 9 IO-SAPIC-level acpi
45: 0 4 0 3 IO-SAPIC-edge serial
48: 0 0 0 0 IO-SAPIC-level ehci_hcd
49: 1 7 0 1096 IO-SAPIC-level uhci_hcd
50: 0 0 0 0 IO-SAPIC-level uhci_hcd
51: 0 29 0 824 IO-SAPIC-level eth0
56: 4 56 0 4056 IO-SAPIC-level ioc0
57: 0 0 0 42 IO-SAPIC-level ioc1
238: 0 0 0 0 LSAPIC perfmon
239: 234862 229739 229290 228792 LSAPIC timer
254: 37 89 92 94 LSAPIC IPI
NMI: 0 0 0 0
ERR: 0
[Dmesg, /proc/interrupts, lspci -v , .config are attached in 2.4.log below]
<<2.6.ZIP>>
[-- Attachment #2: 2.6.ZIP --]
[-- Type: application/x-zip-compressed, Size: 12693 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread