[PATCH v2 10/11] media: ccs-pll: Print PLL calculator flags in the beginning

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Print the PLL calculator flags right away when the PLL calculator is
called. Previously this was done only in a successful case and that didn't
really help solving a problem when one happened.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/media/i2c/ccs-pll.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c
index fc6f8aff5fd8..8e01be4b0785 100644
--- a/drivers/media/i2c/ccs-pll.c
+++ b/drivers/media/i2c/ccs-pll.c
@@ -123,8 +123,11 @@ static void print_pll(struct device *dev, const struct ccs_pll *pll)
 		pll->pixel_rate_pixel_array);
 	dev_dbg(dev, "pixel rate on CSI-2 bus:\t%u\n",
 		pll->pixel_rate_csi);
+}
 
-	dev_dbg(dev, "flags%s%s%s%s%s%s%s%s%s%s%s\n",
+static void print_pll_flags(struct device *dev, struct ccs_pll *pll)
+{
+	dev_dbg(dev, "PLL flags%s%s%s%s%s%s%s%s%s%s%s\n",
 		pll->flags & PLL_FL(OP_PIX_CLOCK_PER_LANE) ? " op-pix-clock-per-lane" : "",
 		pll->flags & PLL_FL(NO_OP_CLOCKS) ? " no-op-clocks" : "",
 		pll->flags & PLL_FL(EVEN_PLL_MULTIPLIER) ? " even-pll-multiplier" : "",
@@ -738,6 +741,8 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim,
 	u32 i;
 	int rval = -EINVAL;
 
+	print_pll_flags(dev, pll);
+
 	if (!(pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL)) {
 		pll->op_lanes = 1;
 		pll->vt_lanes = 1;
-- 
2.39.5